trade shows

Featured

Joris’s Definitive Guide to Surviving Formnext 2023

I’ve been attending Formnext, and its predecessor Euromold, for several years. During this time, I’ve gathered valuable insights that could benefit future attendees. While Formnext is an engaging but demanding…

Insights from the MGA 2023 Annual Meeting: US Army 3D Prints Cannon Part with Velo3D Machine

Mobility | Medical goes Additive (MGA) serves as a robust network committed to industrializing additive manufacturing (AM). Bringing together a diverse array of firms—including Siemens, 3D Systems, 3YOURMIND, Alstom, Arburg,…

3D Printing Webinar and Event Roundup: September 17, 2023

It’s another busy week filled with 3D printing webinars and events! Topics include photopolymers and industrial automation, aerospace and 3D scanning, DIGITAL FOAM and composite 3D printers, biomaterial bioinks, and…

3D Printing Webinar and Event Roundup: September 10, 2023

This might possibly be the longest webinar and event roundup we’ve ever done at 3DPrint.com—that’s how many offerings there are this week! I won’t waste your time in this introduction…

3D Printing Webinar & Event Roundup: May 21, 2023

There are several conferences and trade shows to tell you about in this week’s roundup, along with a few webinars as well. Materialise will discuss what’s new in Magics, 3D…

Sponsored

RAPID + TCT Flies into Chicago with 350+ 3D Printing Exhibitors

Despite economic uncertainties, additive manufacturing (AM) is likely in the process of experiencing its biggest boom to date, in large part due to global trends related to supply chain resilience…

3D Printing Webinar & Event Roundup: March 12, 2023

It’s a busy week for the 3D printing industry in terms of webinars and events! Satellite 2023 takes place in Washington, DC, while the International Dental Show is coming to…

3D Printing Webinar & Event Roundup: March 5, 2023

We’ve got plenty of trade shows and other events to tell you about in this week’s roundup, including America Makes’ Spring TRX at UTEP, Global Industrie 2023, and Implement AM’s…

3D Printing Webinar and Event Roundup: November 27, 2022

Coming off of Thanksgiving in the U.S., we’re still at low mass when it comes to 3D printing webinars and events, but there are still a few offerings this week,…

3D Printing Webinar and Event Roundup: June 12, 2022

We have another busy week of webinars and events, starting with an international conference on powder metallurgy. In addition, Stratasys is continuing its Experience Tour, TriMech will discussing managing data…

3D Printing Webinar and Event Roundup: June 5, 2022

Last week was a bit of a reprieve, and we’re back in business now with a full schedule of 3D printing webinars and events! Topics include automation, polymer 3D printing…

Tips for Surviving Your First 3D Printing Trade Show

With the most severe COVID restrictions seemingly paused, at least for the moment, it seems as though trade show season is back n full swing. And, if the crowd at…

Featured

The State of 3D Printing: Reading the Room at RAPID + TCT

As far as cliches go, “timing is everything” is a pretty good one. It’s especially useful to keep in mind for when you’re making predictions: voice your prediction too early…

Featured

Boeing, Others Added to 3D Printing Event AMS 2022

The lineup for the 2022 Additive Manufacturing Strategies (AMS) event is nearly complete, as organizers from SmarTech Analysis and 3DPrint.com finalize speakers and sponsors. After last year’s all-virtual format, due to…

The TBGA In-Person Events Survey – “Things That Make You Go Hmmm…”

The AM industry is special. Where else could we get away with writing articles, usually technical ones, peppered with our Spotify playlist titles? So here we go again with a…

Formnext 2018 Review and 26 Key Learnings for Marketing Folks

I think that after a very busy Formnext we can all say that it will be a while before any one of us listens to Kenny G, Coltrane or indeed…

Interview With Sascha F. Wenzler of Formnext About 3D Printing Tradeshows and Formnext 2018

Formnext is fast approaching and it will be massive. Just based on the number of interview requests, press releases and press conferences we’ve been invited to there will be an…

Sponsored

Six Shows In One: UBM’s Advanced Manufacturing New York Event Covers 3D Printing, Robotics, Smart Manufacturing, and More

Big events are a good way to bring everyone in the manufacturing industry together to discuss common themes, like design and 3D printing. Global B2B event producer UBM Advanced Manufacturing Expos…

Around the World in 3D Printing: First Half 2017

As the 3D printing industry heats up, so do the jet and car engines as we continue to travel around the US and the world to check in on the…

3D Printing Helps Autonomous Sailboat Take On the Atlantic

Industrial 3D printer manufacturer German RepRap, based in Munich, first introduced its large X1000 3D printer in 2014, and it’s been evolving ever since. The industrial printer, with a massive…

Why I Wasn’t Bored at CES 2017

CES 2017 has come and gone and left us all with a smattering of new tech product announcements and (I know I’m not alone in this) a lingering bug from…

Think 3D Printing Won’t Be in the Spotlight at CES 2017? Think Again!

This Thursday marks the official opening of the 50th annual CES event, and 3DPrint.com is thrilled that we’re going to be in attendance this year. In 2016, we traveled around the…

Around the World in 3D Printing: 2016 in Review

Throughout the last 12 months, we’ve been following growth in every aspect of the 3D printing industry, from hardware introductions to software developments to new materials set to bring new…

Promoting 3D Printing With 3D Printing

It seems any time a conversation about desktop 3D printing comes up, somebody will utter the words, “toys & tchotchkes.” You can almost feel the air deflate from the conversation….