Electronics

3D Printed Micro Antenna is 15% Smaller and 6X Lighter

Horizon Microtechnologies has achieved success in creating a high-frequency D-Band horn antenna through micro 3D printing. However, this achievement did not rely solely on 3D printing; it involved a combination…

DARPA Announces 3D Printing of Microelectronic Systems Program

The Defense Advanced Research Projects Agency (DARPA) has announced the Additive Manufacturing of Microelectronic systEms (AMME) program, an endeavor aiming to accelerate development of the next generation of additively manufactured…

$1.1M Grant to Drive Q5D’s Automated Wiring Tech

Q5D, a UK-based company, specializes in creating an automated wire harness robot cell. The firm has recently received a $1.1 million grant to further automate its CY1000 wiring solution. For…

Sony Semiconductor Israel Spinoff Lands $20M for Supply Chain Digitization

Supply chain digitization startup Sensos, a spin-off of Sony Semiconductor Israel, recently secured $20 million in new funding in its Series A round. The lead investor in the round was…

3DPOD Episode 186: Micro DLP 3D Printing with John Kawola, CEO of BMF3D

John Kawola was one of the initial employees at Zcorp, a pioneering 3D printing company known for manufacturing color parts that was eventually acquired by 3D Systems. Subsequently, Kawola rejoined…

Sponsored

Advancing Space Applications with Additive Manufacturing

Additive manufacturing (AM) has been used on spacecraft since the early 2010s, one early example being the NASA Juno Spacecraft, which launched in August 2011. AM is beneficial for spacecraft…

Electronics 3D Printing Company Electroninks Partners with Japan’s SAKATA INX

Electroninks, the Austin-based manufacturer of metal complex inks for electronics applications, has partnered with SAKATA INX, a Japanese company that manufactures a variety of inks, including materials for the electronics…

Flexible Wireless Temperature Sensor Made with 3D Printing

Researchers from the University of Glasgow, University of Southampton, and Loughborough University have developed an innovative flexible temperature sensor utilizing microwaves and 3D printing technology. As detailed in an article…

Optically Active Nanostructures 3D Printed by Austrian Research Team

For more than a decade, a research team at Austria’s Graz University of Technology has been developing a method for manufacturing nanostructures with 3D geometries. In November 2023, the team…

Sponsored

Micro 3D Printing as an Innovation Accelerator for the Electronics Industry

Take a look at the cellphone over the years – camera lenses have gotten smaller, features have exploded, but the size of the devices has stayed relatively the same. This…

Featured

Design Software Mega-Merger: Synopsys Plans to Buy Ansys for $35B

A funny thing happened on the way to all of the hypothetical additive manufacturing (AM) mega-mergers floated throughout 2023: none of them ended up taking place. Despite the fact that…

Is Lithoz Prepping for an IPO?

Growth numbers in the startup world can often be indicators of major developments. A recent update from German ceramic 3D printing expert Lithoz has us wondering if it is gearing…

Featured

The Rise of 3D Printing in South Korea

South Korea has been steadily increasing its involvement in additive manufacturing (AM), particularly in the post-2010s, with the government’s “Manufacturing Innovation 3.0” strategy placing AM at the forefront. This initiative,…

Featured

Biden Admin Announces Over $6 Billion in Funding for Battery and Chip Advanced Manufacturing in November

In a development that has become routine for the Biden administration, the White House announced a total of more than $6 billion in new funding opportunities for advanced manufacturing applications…

Unbelievably Tiny Probes 3D Printed by Exaddon for Semiconductor Testing

The semiconductor industry, a cornerstone of modern society, is facing a significant challenge in probe testing. This $500 billion sector, essential for powering our devices, transport, and communication systems, is…

Featured

Hittech Group & Sandvik’s BEAMIT to Create Venture for 3D Printing for Semiconductors

Hittech Group, a Netherlands-based manufacturer of advanced machinery, and 3T Additive Manufacturing, a UK-based engineering firm specializing in additive manufacturing (AM), have announced that the two companies will form a…

3D Printed Electronics Market to Explode to $7.9B by 2033

According to the new “3D Printed Electronics 2023: Market Study & Forecast” report from Additive Manufacturing Research (“AMR,” formerly SmarTech Analysis), the 3D printed electronics sector is on the verge…

Featured

Indiana University Makes Landmark $111M Investment in Microelectronics Advanced Manufacturing to Support Naval Crane DivisionCrane

Indiana University (IU) has announced that it will invest at least $111 million over the next several years into emerging technologies, including a variety of advanced manufacturing techniques, with a…

Construction and Electronics 3D Printing: Specialty AM Applications at AMS 2024

The 2024 Additive Manufacturing Strategies (AMS) event is rapidly approaching, and anticipation is reaching fever pitch within the 3D printing community. Scheduled for February 6-8, this seventh edition of the…

Featured

DoD Announces $270M in New Funding for US Advanced Manufacturing

The US Department of Defense (DoD) made two announcements in the last couple of weeks that together amount to about $270 million in public spending on the US production base,…

PRO

How Can 3D Printing Impact the Semiconductor Supply Chain?

Just as AM as a whole is being used as a tool to ensure more flexible, sustainable supply chains, 3D printing will be used to do the same for microchip…

3D Printing News Briefs, August 23, 2023: Sales & Distribution, Parametric Modeling, & More

In business news today, nano3Dprint announced its latest strategic distribution partnership in Asia, Snowbird Technologies is Meltio’s newest sales partner, and EOS North America launched its AMTurnkey Service. Continuing with…

Featured PRO

How Has the Microchip Shortage Impacted the 3D Printing Supply Chain?

It’s no secret that issues related to the semiconductor supply chain have impacted industry globally, including the additive manufacturing (AM) sector. The exact effect on AM has yet to be…

Reshoring Electronics Manufacturing with 3D Printing: A Conversation with NextFlex

While much of it takes place behind the closed doors of corporate labs, electronics 3D printing is quietly revolutionizing the way goods are manufactured in the U.S. and abroad. And,…