automated post-processing

There’s plenty to do in the 3D printing industry this week! We’ll tell you about events happening all over the world, and webinars about everything from pellet 3D printing for…

No matter where you are in the world this week, from Ohio, Minnesota, and California in the U.S. to Budapest, Italy, Moravia, or just on your computer at home, there’s…

Almost a decade ago, manufacturers of laser powder bed fusion (LPBF) machines were showcasing dreams of a completely automated metal 3D printing factory. Visions like Concept Laser’s AM Factory of…

We’ve got another eventful week coming up in the 3D printing industry! There are events and conferences in several countries, including the U.S., Canada, and Singapore, and webinars on all…

In the 3D Printing Webinar and Event Roundup this week, 3D Systems continues its roadshow, ASTM International starts a professional certificate course, GE Additive holds a webinar about how binder…

I hope your calendar is clear, because there are lots of 3D printing webinars and events to attend this week! America Makes will hold its MMX event and Markforged has…

Webinar topics covered in this week’s roundup include metal AM material development, 3D printing for wax investment casting patterns, post-processing for military applications, and more. Plus, Stratasys continues its tour,…

Key to enabling the adoption of additive manufacturing (AM) in mass manufacturing is automation, as detailed in the “Automation and Additive Manufacturing: Opportunities and Markets” report from SmarTech Analysis. Yet,…

It’s another busy week of events and webinars in the 3D printing industry! Stratasys continues its cross-country tour of the U.S., while Markforged will hold a few demonstration events and…

Webinars and events in the 3D printing industry are ramping back up again this week! Stratasys continues its cross-country tour of the U.S. and will also host one of its…

It’s a busy week of webinars and events in the 3D printing industry! The Paris Air Show is back, and Stratasys continues its U.S. tour, and starts Stratafest as well….

We’re starting out with business in 3D Printing News Briefs today, as Exentis appointed Eric Bert the President of Exentis Americas, and 3YOURMIND announced Alexandre Donnadieu has been promoted to…

Once again, we’ve got a lot of offerings in this week’s roundup, with Velo3D’s Roadshow making a stop in Denver and TechBlick holding a virtual learning and networking session. There…

We’ve got a little lighter week in terms of webinars and events, but there are still plenty of offerings to keep you busy! In addition to AITS Bremen, there will…

For this weekend’s roundup, the TIPE 3D Printing Conference kicks things off with its third iteration on Tuesday, and ASTM International will hold an AM construction workshop. There will also…

Webinars and events are starting to pick up again in December, with the Defense Manufacturing Conference being held in Tampa this week and a few other in-person and virtual events…

Two features crucial to the next phase of additive manufacturing’s (AM) evolution are automation and quality control. Tackling both of these trends from a software and hardware standpoint, Stratasys (NASDAQ:…

Industry research firm SmarTech Analysis has published its latest report on post-processing for the additive manufacturing industry, “Post-Processing for Additive Manufacturing: Market Analysis and Forecast,” which shows the critical role…

We’re starting with software in today’s 3D Printing News Briefs, as Autodesk has released 3D printing profiles for two of The Virtual Foundry’s filaments and Sigma Additive Solutions joined the…

We’ve got several in-person events to tell you about in today’s roundup, as SMASIS, IMTS, and more will be held this week. Webinars will focus on topics including post-processing, using…

It used to be considered 3D printing’s “dirty secret.” Now, however, post-processing isn’t just a well-known aspect of the industry, but it is a thriving subsegment in itself. Just read…

Business, post-processing, aviation, automotive, and guns—that’s what on the menu in today’s 3D Printing News Briefs! AMT appointed Magnus René as Chairman of the Board, Optomec announced major growth in…

It’s a pretty slow week as far as events and roundups go, and we’ve only got four to tell you about in today’s roundup. Topics include support removal, advanced design…

PostProcess Technologies has released its latest in its line for automated support removal for fused deposition modeling (FDM) parts. The machine is called the VORSA 500 and the company suggests…