3DExperience platform

3D Printing Webinar and Virtual Event Roundup, July 19, 2020

A variety of topics will be covered in this week’s webinar and virtual event roundup, including additive manufacturing in aerospace, CAMWorks, product management, post-processing, and more. Read on to learn…

3D Printing Webinar and Virtual Event Roundup, July 13, 2020

We’ve got six webinars and virtual events to tell you about in this week’s roundup, including two about ceramics 3D printing, one focused on patents and another on pharmaceuticals, a…

3D Printing News Briefs: January 8, 2020

It’s the first 3D Printing News Briefs of 2020! To celebrate, we’ll start with some predictions for the industry made by three Ultimaker executives. Continuing on, Dassault Systèmes has the…

3D Printing News Briefs: October 29, 2019

We’ve got a lot of business news for you, plus a case study, in today’s 3D Printing News Briefs. TÜV SÜD and thyssenkrupp have signed an MoU, while Dassault Systèmes…

3DEXPERIENCE Modeling & Simulation Conference: Finn Mast Project & Guest Speaker Dr. Byron Pipes

Recently, Dassault Systèmes, the 3DEXPERIENCE software company, held its 3DEXPERIENCE Modeling & Simulation Conference. I was lucky enough to be invited to attend the event in Novi, Michigan, and the first…

3DEXPERIENCE Modeling & Simulation Conference: Keynote by Skunk Works & Executive Roundtable

Last week, Dassault Systèmes, the 3DEXPERIENCE software company, held the 3DEXPERIENCE Modeling & Simulation Conference in Michigan. I was invited to attend the event, which was held from September 18-19…

Dassault Systèmes Introduces SOLIDWORKS 2020 Release, Holds Modeling & Simulation Conference

At SOLIDWORKS 2019 in Dallas, Dassault Systèmes revealed a lot of features the company was working on for its upcoming SOLIDWORKS 2020 release. Now, the day has finally arrived!  …

Dassault Systèmes Announces Extended FDA Partnership, Dassault Aviation Collaboration, Earnings

Dassault Systèmes makes numerous announcements this week, as they continue to lead in partnerships and projects around the world, usually connected to their proprietary 3DEXPERIENCE platform. Currently the FDA has…

SOLIDWORKSWORLD 2019: Global R&D Team Discusses New and Improved Features in SOLIDWORKS

Earlier this week, I arrived back home in chilly Ohio after spending a couple of days in Dallas, Texas. But I wasn’t just visiting the Lone Star State to enjoy…

Dassault Systèmes Acquires IQMS to Extend 3DEXPERIENCE Platform to Smaller Manufacturers

This week, Dassault Systèmes, announced that it has entered into an agreement to acquire California-based manufacturing ERP software company IQMS. The $425 million acquisition, to be paid in cash by early…

HP Announces Lower-Cost Full-Color 3D Printing Systems, SOLIDWORKS Collaboration

Full-color 3D printing represents something of a holy grail: many have been working on developing solutions that will be viable and meet expectations, but we haven’t seen a full answer…

Dassault Systèmes Introduces the 3DEXPERIENCE Marketplace

Dassault Systèmes has made a major impact on the manufacturing world, particularly where 3D printing is involved, with its 3DEXPERIENCE platform. Now that impact is about to expand further with the introduction…

3D Printing News Briefs: January 23, 2018

We’ve got a lot of business to cover in 3D Printing News Briefs today, starting with some big news from Dassault Systèmes – it has been recognized as the world’s…

SIMULIA Team Discusses Deeper Holistic Integration as the Way Forward for Additive Manufacturing

Part of the deep disappointment experienced in the crash from the hype days of 3D printing traced back to Star Trek expectations being dashed; while technically a 3D printer does fabricate…

3DEXPERIENCE Forum Examines Realistic Digitalization in Industry

This week in Hollywood, Florida, the 3DEXPERIENCE Forum is examining Business in the Age of Experience — specifically, a more digital experience. Hosted by Dassault Systèmes, the conference is bringing together…

Dassault Systèmes’ 3DEXPERIENCE Soars with Billion-Dollar Boeing Partnership, Educational Adoption for Tomorrow’s Aerospace Workforce

In 1986, aviation powerhouse Boeing turned to CATIA software from Dassault Systèmes for the design and manufacture of new airplanes. A few decades on, 3D technologies have become a staple tool…

Dassault Systèmes Acquires AITAC, Will Fully Integrate its Smart Drawings 3D Software Into Industry Solution Experiences

Dassault Systèmes, which announced a partnership with Stratasys at SOLIDWORKS World 2017 this winter and recently opened the new 3DEXPERIENCE Center at Wichita State University, has just acquired Dutch company AITAC BV,…

Science in the Age of Experience Focuses on Digital Pathway from Concept to Production with Additive Manufacturing Symposium

This week in Chicago, Dassault Systèmes is hosting Science in the Age of Experience as the company’s 3DEXPERIENCE platform continues with its forward momentum. Dassault, which recently opened its latest 3DEXPERIENCE…

Inside the 3DEXPERIENCE Center: Dassault Systèmes Executives Underscore Importance of 3D Printing & Advanced Manufacturing in Kansas

On Thursday, 27 April, Wichita State University and its National Institute for Aviation Research (NIAR) held the grand opening of the new 3DEXPERIENCE Center as the school’s Innovation Campus grows with…

3D Printing News Briefs: April 28, 2017

In this week’s second edition of 3D Printing News Briefs, we’ve got information about the latest partnerships in the additive manufacturing business world, a company launching a new branding identity, and…

Airbus and Dassault Systèmes Inaugurate Wichita State University Sites Focused on 3D Technologies & Aerospace Innovation

Today in Kansas, aerospace takes another great leap forward as new innovation sites at Wichita State University cut their ribbons: Airbus and Dassault Systèmes are officially residents at the Innovation Campus….

Damen Shipyards Group Goes Digital With 3DEXPERIENCE Platform

Last month, when 3DPrint.com attended SOLIDWORKS World 2017, we were impressed by just how much of the conference was focused on 3D printing – but another topic we heard a…

Stratasys and Dassault Systèmes Announce New Additive Manufacturing Partnership at SOLIDWORKS World 2017

Today is the last day of the SOLIDWORKS World 2017 conference in Los Angeles, and the big announcements just keep rolling out. On the first day, 3D printing solutions heavyweight Stratasys introduced…

Stratasys Teams Up with Dassault Systèmes and Innodesign for Design 2020, to Prepare Korean Design Students for Future Careers

To help prepare today’s design students to become tomorrow’s engineers, three leading tech companies have partnered together on the first-ever Design 2020 program, to help prepare the students for future…