workshops

3D Printing Webinar and Event Roundup: September 5, 2021

Buckle up, it’s a busy week of webinars and events ahead! From oxygen content in titanium grades and 3D printed orthotics and prosthetics to saving money in the GrabCAD Shop…

3D Printing Webinar and Event Roundup: July 10th, 2021

We’ve got another busy week of industry webinars and events, both virtual and in-person, to tell you about! Topics range from automotive 3D printing and 3D printing steel to point-of-care…

3D Printing Webinar and Event Roundup: June 13, 2021

In this week’s events and webinars roundup, we’re covering topics like software, metal binder jetting, 3D printing for the luxury sector, and more. So let’s dive right in! What’s New…

Sponsored

ROKIT Healthcare advances audience access to bioprinting with bioprinting exhibitions and workshops

ROKIT Healthcare is hosting a series of educational workshops for students, teachers, and professionals to teach and highlight the fundamentals of bioprinting and its applications in healthcare. Previous workshops were…

3D Printing Webinar and Event Roundup: May 16, 2021

Even as we get closer to the official start of summer, that doesn’t mean the amount of webinars, virtual events, and live events are going down; in fact, the opposite…

3D Printing Webinar and Event Roundup: May 9, 2021

We’ve got another full week of AM industry webinars and events to tell you about, so let’s not waste any time on the introductions—jump right in! SPE’s ANTEC 2021, with…

3D Printing Webinar and Virtual Event Roundup: March 7, 2021

From designing polymer lattices and building a starship in SOLIDWORKS to 3D simulation in the automotive industry and electronics printing, all sorts of topics are being covered in the webinars…

3D Printing Webinar and Virtual Event Roundup: February 21, 2021

This coming week is chock full of webinars, with three a day for three days running. So without further ado, let’s dive right in! TriMech on Sweeps and Threads in…

3D Printing Webinar and Virtual Event Roundup: February 7, 2021

While this week is quiet in terms of webinars, there are a couple of big virtual events coming up, including Additive Manufacturing Strategies 2021, hosted by 3DPrint.com and SmarTech Analysis….

3D Printing Webinar and Virtual Event Roundup: January 17, 2021

We’ve got all kinds of virtual events and webinars to share with you this week, with topics ranging from 3D design and medical applications to simulation and more. Read on…

3D Printing Webinar and Virtual Event Roundup, September 6, 2020

The first virtual offering we’re telling you about is Anisoprint’s new Composites Talks, taking place on September 7th. On September 9th, DyeMansion will host a webinar about VaporFuse Surfacing for…

3D Printing Webinar and Virtual Event Roundup, July 13, 2020

We’ve got six webinars and virtual events to tell you about in this week’s roundup, including two about ceramics 3D printing, one focused on patents and another on pharmaceuticals, a…

ASTM International & America Makes Create Strategic Guide for Additive Manufacturing Data

As the national accelerator for additive manufacturing (AM) in the U.S., Youngstown, Ohio-based America Makes works to accelerate adoption of the technology and increase the country’s global manufacturing competitiveness through training,…

3D Printing Webinar and Virtual Event Roundup, June 12, 2020

In this week’s 3D Printing Webinar and Virtual Event Roundup, 3DEO is holding a webinar called “Manufacturing the Future” on June 16th, and Nexa3D is hosting a leadership forum in…

Success in Education: Michigan Technological University Offers Comprehensive 3D Printing Technology Workshop to Teachers

Chelsea Schelly, Gerald Anzalone, Bas Wijnen, and Joshua M. Pearce, researchers from several different departments at Michigan Technological University, explore one of the most exciting aspects of digital fabrication in…

3D Printing News Briefs: April 15, 2020

In today’s 3D Printing News Briefs, the AM industry is turning to the internet to stay connected during this time of COVID-19. Women in 3D Printing’s inaugural virtual panel series…

3D Printed Prosthetics Organization e-NABLE Holding Enablecon 2019 in Maryland

The very first e-NABLE Community Conference, or Enablecon, was held back in 2014, and the annual event has just continued to get bigger since then. We’ve learned that the Enable…

Additive Manufacturing Strategies: Call for Metal, Dental, and Medical 3D Printing Speakers

In February 2020, the third annual Additive Manufacturing Strategies summit, co-hosted by 3DPrint.com and SmarTech Markets Publishing, will be held in Boston – the same city it called home last year, though the first…

Greek Refugees Using Mass Portal 3D Printer, Donated by Materialise, to Design and Print Their Own Models

We often hear heartwarming stories of how 3D printing is being used to make the world a better place in all sorts of ways. In 2016, German NGO Soup & Socks…

AMS 2019 Day 1: 3D Printing in Surgical Planning and Dental Industry

After touting it for months, it’s finally here – Additive Manufacturing Strategies, the summit that 3DPrint.com is co-hosting with SmarTech Markets Publishing, has begun. This is the second year for…

3D Printing News Briefs: November 9, 2018

Buckle your seat belts, because we’ve got a lot of news to share with you in today’s 3D Printing News Briefs, starting with more event announcements and moving on to…

Renishaw Partnering with Altair to Bring Metal 3D Printing to Industrial End Users

UK-based Renishaw, one of the world’s top metrology and spectroscopy companies, is also well-known for its advanced metal 3D printers. The company works to make the technology more mainstream, and is now…

learnbylayers Partnering with UK’s National STEM Learning Center for 3D Printing Lessons

In the fall, a helpful 3D printing curriculum resource for teachers called learnbylayers was launched by Philip Cotton, one of the first teachers in the United Kingdom to introduce 3D printing in the classroom. Not long after,…

Educational Business Wins Hack My Van Contest, Will Offer Portable 3D Printing Workshops in New Zealand

The Hack My Van competition, put on for the second year by Mercedes-Benz Vans, reminds me a little bit of the reality TV show Pimp My Ride, where ruined cars were…