Scott Dunham
AM Research to Unpack 3D Printing Market Trends at AM Investment Strategies
The global additive manufacturing (AM) market reached $3.9 billion in the second quarter of 2025, according to new data from Additive Manufacturing Research (AM Research). The results mark an 8.8%…
AM Research Reports $3.58B Q1 Revenues, Opens Access to Free Data
The additive manufacturing (AM) industry posted a strong start to 2025, with global revenues reaching $3.58 billion in the first quarter, according to the latest analysis from Additive Manufacturing Research…
AM Research Reports $3.58B AM Market in Q1 2025, Upgrades Metal Forecast
The global 3D printing market grew to $3.58 billion in Q1 2025, according to the latest data from Additive Manufacturing Research (AM Research). This marks a 9% year-over-year increase, suggesting…
AM Research Webinar: How Continuum Turns Nickel Scrap into Cost Savings & Sustainability
Continuum Powders, a supplier of metal additive manufacturing powders, is on a mission to develop solutions that empower industries to optimize resources and reduce waste. And it’s not just lip…
3D Printing by the Numbers: Free AM Research Webinar to Dig into Market’s 2024 and 2025 Financial Performance
The additive manufacturing (AM) sector is at a pivotal moment, with industry growth stabilizing after a year of uneven performance. To help businesses and professionals navigate the evolving market, Additive…
AM Research Webinar to Give Attendees Free Access to 3D Printing Market Data
Is 2024 a turning point for additive manufacturing (AM)? AM Research’s upcoming webinar will dive into the numbers. The 3D printing industry is in a pivotal moment. While the sector…
Printing Money Episode 26: 3D Printing Markets and Deals with Dayton Horvath, AMT
Welcome to Printing Money Episode 26! For this episode, Danny is joined by Dayton Horvath, Director of Emerging Technology at AMT (and Printing Money alum!). Danny and Dayton had some…
Additive Manufacturing Strategies 2025: Consensus on the Road Ahead for 3D Printing
The 2025 edition of Additive Manufacturing Strategies was a more serious, down-to-earth event, with decisions and pronouncements rooted in data rather than conjecture. Stratasys CEO Yoav Zeif kicked it off…
Themes from AM Investment Strategies: Collaboration, Cost Challenges, and Expanding Markets
The 2024 Additive Manufacturing (AM) Investment Strategies event went off without a hitch. The online roundtable, hosted by AM Research (AMR) and Cantor Fitzgerald, dug into the latest trends and…
3D Printing Webinar and Event Roundup: November 3, 2024
Coming up this week, Stratasys continues its advanced training and North American tour, and will also hold a webinar. The EURONAVAL event is taking place, and so are JIMTOF, ICALEO,…
AM Investment Strategies 2024: A Strategic Look into the Future of 3D Printing
Once again, Additive Manufacturing Research (AMR), in collaboration with Cantor Fitzgerald, is providing the necessary insights to stay ahead in the 3D printing industry as its key players and stakeholders…
3D Printing Webinar and Event Roundup: July 28, 2024
We’ve got a busy week ahead, full of 3D printing webinars and events, both virtual and in-person. The Experience Stratasys tour continues, HP offers the next in its Beyond the…
3D Printing Markets Grows 8% Year over Year
Despite a market slowdown in 2023, the additive manufacturing (AM) sector continues to grow at a robust rate, according to AM Research. The market analysis firm published its Q1 2024…
Watch: Leading CEOs Convene pre-Formnext at AM Investment Strategies 2023
Additive Manufacturing Research (AMR), in collaboration with industry experts, is hosting a free critical one-hour online roundtable to unravel the business and competitive dynamics prevailing in the 3D printing industry,…
AMS 2023: The Only 3D Printing Event in New York Begins with Metal AM Discussion
Additive Manufacturing Strategies (AMS) 2023 has kicked off its annual 3D printing event in New York, introducing new speakers and interactive discussions on important topics like challenges in metal AM…
Metal 3D Printing at AMS 2022: Series Production of Metal Parts
Last week we held our annual Additive Manufacturing Strategies (AMS) summit, co-hosted with SmarTech Analysis, and after going virtual last year due to the pandemic, it was great to be…
SmarTech Analysis: 3D Printing to Reach Historic Growth Levels, Following Strong H1 2021
In its latest quarterly report, SmarTech Analysis anticipates tremendous growth for the 3D printing industry after an already a successful first half of the year. In an analysis that was…
SmarTech’s Metal 3D Printing Powders Report Sees Stalled Growth to $3.7B in 2020
SmarTech Analysis has published the sixth edition of its report dedicated to metal 3D printing powders, “Additive Manufacturing with Metal Powders 2020”, which takes into account the economic challenges and…
Additive Manufacturing Software Represents $3.7 Billion Opportunity in 2027
SmarTech Analysis has put out its most recent report, “Opportunities in Additive Manufacturing Software Markets 2020”, which relays some surprising data about the segment. The market research firm anticipates pretty…
AMFG Publishes Additive Manufacturing Landscape Report 2020: Breaking Down the Industry and Looking at the Future
Today, London-based company AMFG, which provides MES and workflow software for industrial additive manufacturing (AM) that helps companies streamline and manage their production workflows, has released the second edition of…
Scott Dunham: SmarTech Industry Forecasts for Metal and Medical/Dental 3D Printing
The 2020 Additive Manufacturing Strategies (AMS) event ended earlier this week in Boston. The summit was focused on the business of 3D printing in medical, dental, and metals, so it…
3D Printing News Briefs: August 3, 2019
For this edition of 3D Printing News Briefs, we’re starting off with a celebration – Scansite created 3D printed replicas of the spacesuit that Neil Armstrong wore for the 50th…
Interview With SmarTech’s Scott Dunham on the Additive Manufacturing Metal Powders Research
For the past five years, Scott Dunham has been preparing the Additive Manufacturing with Metal Powders Report for SmarTech. SmarTech, part-owned by 3DPrint.com, is the only analysis and research firm…
3D Printed Prosthetics, Surgical Planning, and Modeling at AMS 2019
The second annual Additive Manufacturing Strategies (AMS) summit, “The Future of 3D Printing in Medicine and Dentistry,” was co-hosted by 3DPrint.com and SmarTech Markets Publishing and held in Boston just two short weeks ago….
