in-person events

3D Printing Webinar and Event Roundup: November 27, 2022

Coming off of Thanksgiving in the U.S., we’re still at low mass when it comes to 3D printing webinars and events, but there are still a few offerings this week,…

Formnext 2022, Day Three: Fleet Footed

My feet feel like they’ve been put in a blender and then repeatedly slammed by a door. How did humans cope with standing so much before we invented desks? I…

ICAM 2022: Rising 3D Printing Standards Send Market Signals

As the global additive manufacturing (AM) sector frantically prepared for the sumptuous bazaar that is Formnext, the future of AM was already starkly on display at the smaller, quieter, yet…

Formnext 2022, Day Two: Can You Make Sweaters from Electric Sheep?

I’m acclimating to Frankfurt. I’m ready to be assimilated into the Borg. I’ll wear a suit and with bowed head take the tram to a cavernous building to call people…

Formnext 2022, Day One: Dawn of a New Error in 3D Printing

Formnext and Frankfurt: they’re a bit like Christmas. The good comes with the bad. The Bad It’s cold, grey, and you never really get what you want. This year, powder…

3D Printing Webinar and Event Roundup: November 13, 2022

It’s finally time for Formnext, and everybody who’s anybody in the 3D printing industry will be descending on Frankfurt, Germany this week for the in-person trade show. But if you…

Featured

ICAM 2022: 3D Printing Engineers Need More ($$$)!

The engineers and technicians have gotten the additive manufacturing (AM) sector to where it is now. It’s up to investors and policymakers to take the next step in bringing the…

3D Printing Webinar and Event Roundup: October 30, 2022

We’re ramping up again in this week’s roundup, with several events taking place, including ICAM 2022, DEVELOP3D Live, ASME’s AM Medical Summit, and more. In terms of webinars, Stratasys and…

3D Printing Webinar and Event Roundup: October 23, 2022

This week is a lot less busy in terms of 3D printing webinars and roundups! There are still some conferences and summits to attend, and Stratasys and Markforged are each…

NAMIC Global AM Summit Drives Singapore’s Unique 3D Printing Opportunities

The National Additive Manufacturing Innovation Cluster (NAMIC) 3D printing conference in Singapore kicked off with a full two-day program that represents NAMIC’s first in-person conference in two years. Ahead of…

3D Printing Webinar and Event Roundup: October 16, 2022

Because there an insane number of events and webinars for this week’s roundup, I’m going to do things a little differently in this edition. First, I’ll list all of the…

Velo3D CEO Benny Buller Announced as Opening Keynote for AMS 2023

In less than four months, our 6th annual Additive Manufacturing Strategies (AMS) summit for 3D printing stakeholders returns to New York City. From February 7-9, 2023, 3DPrint.com and SmarTech Analysis…

Beyond Prototyping: 3D Printing with XYZPrinting & Stratasys at IMTS 2022

While attending the IMTS 2022 trade show in Chicago, I made a lot of quick stops at booths in the Additive Manufacturing (AM) Pavilion to try and make as many…

Registration Open for the 2023 AMUG Conference

Trade shows are now fully revived and that includes the annual happening hosted by the Additive Manufacturing Users Group (AMUG). Registration for the 2023 AMUG Conference is now open. Owners and operators…

3D Printing Webinar and Event Roundup: October 9, 2022

We’ve got loads of things to tell you about in this week’s roundup! There are multiple events, both in-person and virtual, as well as numerous webinars on a variety of…

3D Printing Webinar and Event Roundup: September 25, 2022

We’ve got a busy week of 3D printing webinars and events ahead! Nanoscribe is attending the Biofabrication Conference, Stratasys, Velo3D, and Markforged continue their tours, and Formlabs will hold a…

3D Printing Super Materials & Flexible Materials with Roboze & Markforged at IMTS 2022

IMTS 2022 wrapped up last week in Chicago, and there was a lot to see on the show floor, which was comprised of nine separate pavilions—including one entirely focused on…

IMTS 2022: 3D Printing Software with CASTOR and Dyndrite

Last week, I got to visit one of my favorite cities, Chicago, to attend my first International Manufacturing Technology Show (IMTS). The biennial event is the largest, longest-running industry trade…

3D Printing Webinar and Event Roundup: September 18, 2022

In this week’s roundup of webinars and events in the 3D printing industry, Stratasys and Markforged continue their tours, and ASTM International’s CoE is holding a snapshot workshop. HP will…

3D Printing Webinar and Event Roundup: September 11, 2022

We’ve got several in-person events to tell you about in today’s roundup, as SMASIS, IMTS, and more will be held this week. Webinars will focus on topics including post-processing, using…

MMX 2022: Guests from the White House and 3D Printer Manufacturers

America Makes is the United States’ leading public-private partnership for additive manufacturing (AM) technology and education, working to not only accelerate adoption of the technology in the country, but also…

Featured

MMX 2022: Celebrating 10 Years of America Makes & 3D Printing in Ohio

America Makes is the United States’ leading public-private partnership for additive manufacturing (AM) technology and education, working to not only accelerate adoption of the technology in the country, but also…

3D Printing Webinar and Event Roundup: June 26, 2022

Events for this week have already started, like the ISTE Live conference for technology in education down in New Orleans. Stratasys continues its Experience Tour in Ohio, Divide by Zero…

3D Printing Webinar and Event Roundup: June 19, 2022

It’s another busy week of events and webinars coming up, starting with the AM Industry Summit in Long Beach. 3D Delta Week and the Silicone Expo are also taking place,…