University of Wollongong: Refining the Cochlear Implant with 3D Printing

In ‘3D Printing of Flexible Electrodes for Clinical Applications,’ Laura Blanco Peña of the University of Wollongong presents her thesis on the benefits of 3D printing in medicine, and specifically in…

3D Printing with Continuous Wire Polymer Composites on a Modified Prusa i3

Yehia Ibrahim, a thesis student at York University in Toronto, submitted a recent thesis regarding composites for 3D printing in ‘3D Printing of Continuous Wire Polymer Composite for Mechanical and…

Additive Manufacturing Could Prove Promising in Development of Hydraulic Pumps

Saimaa University of Applied Sciences thesis student, Daniil Levchenko, explores the capabilities of complex 3D printing in ‘Design of a Hydraulic Pump for Construction with Additive Manufacturing Tools.’ While was…

University of Montana: Analyzing Accuracy of 3D Printed Femurs for Forensic Anthropology and Bioarchaelogy

Thesis student Myriah Adonia Jo Allen (University of Montana) discusses not only the implications of 3D scanning and 3D printing overall, but more specifically, how important the technology of 3D…

Aalto School of Engineering: Reverse Engineering Spare Parts Through 3D Technology

In the recently published, ‘Methods to reverse engineer spare parts,’ thesis student Edoardo Colombo, from the Aalto School of Engineering, expounds on the benefits of digital spare parts, and their…

LSU: Thesis Student 3D Prints Strain Sensors for Electronics & Wearables

Louisiana State University thesis student, Austin Smith, hits the mark in exploring mechanisms for sensors in wearable electronics. In ‘Design and Fabrication of FDM 3D Printed Strain Sensors,’ the author…

Nanyang Technological University: Inkjet Printing of ZnO Micro-Sized Thin Films

In ‘Inkjet-printed ZnO thin film semiconductor for additive manufacturing of electronic devices,’ thesis student Van Thai Tran, from Nanyang Technological University, delves into the realm of fabricating products with conductive…

3D Printing Lab-on-A-Chip with Droplet Emulsion & NinjaFlex

In ‘3D Printing a Microfluidic Chip Capable of Droplet Emulsion Using NinjaFlex Filament,’ Robert Andrews from the University of Arkansas 3D prints a novel microfluidic system for his thesis project…

Generative Design Methods Combine 3D Printing & Organic Evolution

 “Go take your lessons from nature, that’s where our future lies.” – Leonardo da Vinci Virginia Commonwealth University student Mohammad Jawad takes a forward-looking approach to manufacturing, as 3D printing…

View More

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our 3DPrint.com.

You have Successfully Subscribed!