US army

A $3.5 million contract will see researchers from the University of Arkansas (U of A) study the use of construction 3D printing for disaster relief on behalf of the U.S….

Mississippi State University (MSU) announced that it has been awarded three contracts, worth a total of $8 million, by the US Army Engineer Research and Development Center (ERDC), to study…

Creality is bringing a $349 3D scanner on the market. The scanner is portable, has an ASIC for better image processing, has on board visual tracking, captures color as well…

The National Institute for Aviation Research (NIAR) at Wichita State University (WSU) has been awarded a $100 million contract by the US Army, for R&D into advanced manufacturing methods for…

A Meltio and Haas hybrid DED 3D printer offered by Philips Corporation has been permanently installed on a US warship of the USS Wasp class Bataan. French firm Lynxter have…

17-4 Percipitation Hardened steel has been produced with the same quality and strength of wrought steel. A fully martensitic 17-4 PH steel could become a very popular material in powder…

The U.S. is intent on further developing a relationship with its closest allies, working together with the U.K. and Australia to 3D print hypersonics and more. Now ,Australian firm SPEE3D…

Colorado University at Boulder spinout Vitro3D is getting $1.3 million in a seed round for its volumetric 3D printing method. The startup wants to print dental aligner molds and scaffolds…

Thanks to funding from the Department of Energy and the United States Army, the University of Pittsburgh is proud to own the first Gefertec arc605 3D printer at any university…

ASTRO America, the American Lightweight Materials Manufacturing Innovation Institute (ALMII), and the United States Army Combat Capabilities Development Command Ground Vehicle Systems Center (DEVCOM GVSC) have partnered to develop a…

Today’s 3D Printing News Briefs will start off with some construction news, as COBOD has released a 3D construction printer configurator, and a Japanese company says it’s 3D printed a…

Military forces worldwide are hyped about using additive manufacturing (AM), spurred by the technology’s ability to produce components on demand, at the point of need, without the logistics of traditional…

In today’s 3D Printing News Briefs, BASF has made two of its Ultrafuse filaments available for the Zortrax M300 Dual 3D printer. Moving to business, a consortium led by Authentise…

This was followed up by a document released in June, titled “Use of Additive Manufacturing in the DoD.” The first policy listed in the June document states that “[The DoD…

General Lattice‘s design software is to be used by the U.S. Army’s Development Command Soldier Center (DEVCOM-SC) to make lattices for the military division’s combat helmet. The company is involved…

3D printing data company Senvol has announced that it is receiving funding from the U.S. Navy and Air Force to further their machine learning software. Senvol ML analyses the relationship…

3D Systems (NYSE: DDD) has been chosen by defense contractor Raytheon and the U.S. Army’s central laboratory to help with a design optimization project. To do that, the 3D Systems’…

Yes, yes, yes: the laser wars are here! For years everyone had single-laser powder bed fusion (PBF) systems. Then, there was double and, for a few years, quad-laser systems were…

Desktop Metal will be developing a sophisticated additive manufacturing (AM) process capable of mass-producing Cobalt(Co)-free hard metal parts for the U.S. Army. The Boston-based company received a multimillion-dollar grant from…

Researchers from Texas A&M University and the U.S. Army Research Laboratory (ARL) developed a new material that can autonomously heal in air and underwater. This first-of-its-kind, 3D printable and stimuli-responsive…

Australian company SPEE3D works hard to make metal additive manufacturing easier, and faster, for customers through its patented supersonic 3D deposition (SP3D) technology, which utilizes cold spray additive manufacturing (CSAM),…

We’re telling you about a new material in today’s 3D Printing News Briefs, followed by some business news and a military partnership. Tethon 3D is launching a new material, while…

We’re talking about business, training, and events on today’s 3D Printing News Briefs. The first European 3D printing incubator will soon be inaugurated in Barcelona, and 3devo is launching training…

Precision Micro-Dispensing and 3D printing manufacturer, nScrypt, based in Orlando, FL, whose bioprinter will travel to the International Space Station in 2019, has delivered a 3Dn-1000 multi-material Factory in a…