post processing
3D Printing Webinar & Event Roundup: May 14, 2023
It’s another busy week of webinars and events! The Additive Manufacturing Coalition is having its first Fly-In, and Velo3D is taking its roadshow to the UK, while Creat3D is holding…
Horizon Microtechnologies Develops Micro 3D Printing Solution for Functional Electronics Packaging
Horizon Microtechnologies, a German additive manufacturing (AM) company specializing in micro-scale components, announced that it has developed a process for series production of functional packaging for microelectrical-mechanical systems (MEMS). The…
Automated Support Removal for Wax 3D Printing Available from PostProcess and CAD BLU
According to the “Post-Processing for Additive Manufacturing: Market Analysis and Forecast” report from SmarTech Analysis, the additive manufacturing (AM) post-processing market is expected to be worth $1.8 billion by 2031….
State of the Art Post-Processing: the Key to Mass Customization – AMS Speaker Spotlight
Mass production with simultaneous individualization has long been considered one of the big goals and one of the greatest differentiators of 3D printing to all previous, traditional manufacturing methods. In…
3D Printing Webinar and Event Roundup: January 22, 2023
For this weekend’s roundup, the TIPE 3D Printing Conference kicks things off with its third iteration on Tuesday, and ASTM International will hold an AM construction workshop. There will also…
3D Printing Webinar and Event Roundup: January 8, 2023
After the recent holiday season, we’re slowly but surely getting back into the swing of things in terms of 3D printing webinars and events. 3D Printing News Unpeeled has changed…
3D Printing Webinar and Event Roundup: December 4, 2022
Webinars and events are starting to pick up again in December, with the Defense Manufacturing Conference being held in Tampa this week and a few other in-person and virtual events…
Post-processing to Automate 3D Printing at Formnext 2022
According to the new “Post-Processing for Additive Manufacturing: Market Analysis and Forecast” report from SmarTech Analysis, this niche segment of the 3D printing sector is expected to reach $1.8 billion…
3D Printing Webinar and Event Roundup: October 2, 2022
In today’s 3D Printing Webinar and Event Roundup, Markforged and Stratasys both continue their tours, but are also holding additional webinars this week. Desktop Metal is holding a webinar about…
Robots for Metal 3D Printing Post-Processing to Debut at Formnext
Rivelin Robotics, a UK-based original equipment manufacturer (OEM) of robotic systems for metal additive manufacturing (AM), announced that it will introduce its NetShape Robots at this year’s Formnext, in Frankfurt,…
3D Printing Webinar and Event Roundup: September 25, 2022
We’ve got a busy week of 3D printing webinars and events ahead! Nanoscribe is attending the Biofabrication Conference, Stratasys, Velo3D, and Markforged continue their tours, and Formlabs will hold a…
3D Printing Webinar and Event Roundup: September 11, 2022
We’ve got several in-person events to tell you about in today’s roundup, as SMASIS, IMTS, and more will be held this week. Webinars will focus on topics including post-processing, using…
AMT Seeks to Automate the 3D Printing Ecosystem
It used to be considered 3D printing’s “dirty secret.” Now, however, post-processing isn’t just a well-known aspect of the industry, but it is a thriving subsegment in itself. Just read…
Metallum3D Successfully Completes Validation Tests of New Microwave Heating Process for Additive Manufacturing
Over the last two years, Metallum3D has been developing a new type of microwave heating process that uses non-resonant, cross-polarized slotted waveguides and a granular susceptor material to evenly distribute…
Ceramic 3D Printing Capabilities Expand with New Admatec Debinding and Sintering Equipment
Admatec has steadily been increasing its 3D printing capabilities, taking its slurry-based digital light processing (DLP) process further. First it expanded from resins loaded with ceramic particles to those loaded…
Injection Molding Firm Oechsler Doubles Down on 3D Printing with HP and AMT Expansion
Oechsler AG is a Germany-based, leading global supplier of polymer solutions that has been operating for over a hundred and fifty years. The company was also an early adopter of…
Role of 3D Printing Software Highlighted by New PostProcess CONNECT3D Tool
As anticipated by the “Automation, Additive Manufacturing and the Factory of the Future” report from SmarTech Analysis, the digital manufacturing thread is started to come together, connecting various parts of…
3D Printed Shoe Soles Cut CO2 Emissions by 48%, Study Says
According to a study published in February 2022 titled “The First Environmental Evaluation of 3D-Printed Footwear,” the current standard production process involved in footwear manufacturing leads to “an industry where…
AMS Speaker Spotlight: How Post-processing Is Changing the 3D Printing Game—Today & Tomorrow
Felix Ewald, CEO & Co-founder of DyeMansion, will be participating in Additive Manufacturing Strategies 2022, Panel 3: Post-processing. Additive manufacturing has the potential to challenge conventional manufacturing technologies & revolutionize the…
AMS Speaker Spotlight: Laying DfAM to Rest—The Biggest Obstacle to 3D Printing Adoption
Zach Murphree, Vice President of Global Sales & Business Development at VELO3D, will be giving the topic keynote on Industrial Metal AM at Additive Manufacturing Strategies 2022, March 1-3. He…
3D Printing Post Processing Boosted by €15M Investment in DyeMansion
German post processing leader DyeMansion has secured €15 million in funding. The startup has opted not to go for venture capital (VC) funding, but instead is receiving €4 million from…
FDM 3D Printing Support Removal Times Cut in Half with VORSA 500
PostProcess Technologies has released its latest in its line for automated support removal for fused deposition modeling (FDM) parts. The machine is called the VORSA 500 and the company suggests…
2022 Predictions: 3D Printing Post-Processing
As we begin 2022, one of the most obvious trends we can see developing is in finishing components. As I’ve said before, we make the shape in the machine, but…
