point-of-care

Featured

2022 Predictions: Medical 3D Printing Is Disrupting Healthcare

According to Savi Baveja, HP’s Chief Strategy & Incubation Officer, technologies such as 3D printing and microfluidics are beginning to “realize the better outcomes that have long been promised of…

Featured

This Smartphone 3D Printer Could Make Meds Tailored Just for You

A collaborative team of researchers from University College London, Universidade de Santiago de Compostela (USC), and FabRx, an expert in pharma-tech, tackled the issue of fabricating personalized medication not just…

Featured

FDA Aims to Regulate Medical Devices 3D Printed at Point of Care

The U.S. Food and Drug Administration’s (FDA’s) Center for Devices and Radiological Health (CDRH) has published a discussion paper on the topic of 3D printing medical devices at the point…

ICAM 2021: Keynotes on 3D Printing in Healthcare & Aerospace

At last month’s International Conference on Additive Manufacturing (ICAM) 2021 in Anaheim, California, hosted by ASTM International’s Additive Manufacturing Center of Excellence (AMCOE), a wide variety of topics were covered,…

3D Printing News Briefs, November 20, 2021: Business, Medical, & More

We’re starting with an unusual story in today’s 3D Printing News Briefs, as mimiX Biotherapeutics, which launched its first acoustic bioprinter this week, noticed that Facebook’s new Meta logo looked…

RAPID + TCT 2021 Keynotes: 3D Printing in Aerospace, Medical, & More

At the start of SME’s 30th year of RAPID + TCT, widely known as North America’s largest, most important additive manufacturing event, AM consultant and writer Todd Grimm got things…

3D Printing News Briefs, September 21, 2021: 3D Printed COVID Test, Meatless Burgers, & More

In today’s 3D Printing News Briefs, some new 3D printed industry technology is being tested at Curtin Malaysia, and three partners are working to make vehicles more lightweight. Researchers have…

Point of Care Medical 3D Printing Enabled by New RIZE Partnership

After the successful implementation of additive manufacturing (AM) in aerospace, medical 3D printing has been leading the charge for adoption for a number of applications. Among the most accessible is…

3D Printing Webinar and Event Roundup: July 10th, 2021

We’ve got another busy week of industry webinars and events, both virtual and in-person, to tell you about! Topics range from automotive 3D printing and 3D printing steel to point-of-care…

Simpleware ScanIP Medical Software Receives 510(k) Clearance for 3D Printed Diagnostics

Synopsys, with its worldwide headquarters located in California and a score of other locations all across the globe, is focused on smart technology, and with more than 30 years in…

3D Printing Webinar and Event Roundup: May 9, 2021

We’ve got another full week of AM industry webinars and events to tell you about, so let’s not waste any time on the introductions—jump right in! SPE’s ANTEC 2021, with…

LimaCorporate and HSS Open First Hospital-Based Facility for 3D Printed Implants

In 2019, global orthopedics manufacturing company LimaCorporate S.p.A. and the Hospital for Special Surgery (HSS), the top-ranked orthopedic hospital in the United States, announced that they were partnering to establish the…

Featured

AMS 2021: 3D Printing in Healthcare Depends on Reimbursement & Regulations

Additive Manufacturing Strategies 2021, co-hosted by 3DPrint.com and SmarTech Analysis, held its fourth summit in a virtual format. Each day focused on two verticals, with the focus first on metal…

3D Systems and Veterans Health Administration Partner for 3D Printing at Point-of-Care for Veterans

It’s no secret that 3D printing has done a lot to help during the ongoing COVID-19 pandemic, even while it’s causing havoc in our own industry, as well. 3D Systems…

3D Printing Webinar and Virtual Event Roundup, October 25, 2020

I hope you’ve cleared your schedule for the week, because we’ve got a lot of webinars and virtual events to tell you about! Formlabs and ASME are both hosting summits,…

3D Systems’ Gautam Gupta on Point-of-Care 3D Printing and the Hospitals of the Future

With experience manufacturing over one million medical devices, planning 120,000 patient-specific cases, and supporting more than 85 CE-marked and FDA-cleared medical devices, 3D Systems’ healthcare business is focusing on accelerating…

3D Printing Webinar and Virtual Event Roundup, August 16, 2020

We’ve got virtual events and webinars this week covering everything from sustainability and forming to metal and medical additive manufacturing. Read on to learn what’s available! NatureWorks 3D Considers Sustainability…

3D Printing Webinar and Virtual Event Roundup, July 7, 2020

We’ve got plenty of 3D printing webinars and virtual events to tell you about for this coming week, starting with nScrypt’s webinar today. 3Ding and Formlabs will each hold a…

Featured

Virtual AM Medical Event: From Innovations to the Future of Additive Manufacturing in the Medical Industry

The American Society of Mechanical Engineers (ASME) hosted a first-of-its-kind event with experts discussing the instrumental role and impact of additive manufacturing (AM) on patient care. Originally set to take…

OIST Researchers Create 3D Printed Modular Microfluidic Prototype for Point-of-Care Testing

Common on-site water quality test kits and at-home infection disease tests typically require the user to do all of the work – collect fluid samples, measure and mix reagents, perform…

Interview with Firoza Kothari of Anatomiz3D

OEMs, materials companies and medical device firms are doing a lot of work with 3D Printing. What we’re not seeing is a lot of medical startups in the field. We’re…

Marc Thurner Launches mimiX Biotherapeutics to Bioprint in the OR Using Sound

The biofabrication race is on. Scientists around the world are competing and the rise of biotechnological commercial players has diversified the field, moving fast to keep up with high expectations…

3D Systems Receives Additonal FDA Clearance for D2P Solution that Makes 3D Printed Anatomic Models

3D Systems has long been involved with using 3D technology to change and save lives in the medical industry. Last summer, the company introduced a new On Demand Anatomical Models service, which allows…