conflux
Conflux 3D Prints Cooling System for Australia’s Zero-Emission Hydrogen Aircraft
In a major step toward zero-emissions aviation, Australian aircraft manufacturer AMSL Aero is developing one of the most ambitious electric aircraft in the world: Vertiia, a hydrogen-powered vertical takeoff and…
Sintavia Buys AMCM Metal 3D Printer with nLight Lasers
Additive manufacturing (AM) service specialist Sintavia recently received a $10 million investment and is already putting the funds to use. The company has purchased a twin-laser AMCM M290-2, equipped with…
Communicating Vessels: Four 3D Printing Markets
Of late, I’ve been considering the 3D printing market not as a single, unified industry but as four distinct markets, each with its own needs. Rather than segmenting the market…
Printing Money Episode 25: Deals & Analysis with Arno Held (AM Ventures) and Tali Rosman
Welcome to 2025, and welcome to Printing Money Episode 25! For this episode Danny welcomes back a couple of previous guests: Arno Held (AM Ventures) and startup advisor Tali Rosman….
AM Rewind: The Biggest News and Trends of 2024
After a sluggish 2023, driven by persistent inflation and geopolitical tensions, 2024 has seen some recovery. Economic growth climbed from about 2.8 percent in 2023 to a modest 3.2 percent…
Themes from AM Investment Strategies: Collaboration, Cost Challenges, and Expanding Markets
The 2024 Additive Manufacturing (AM) Investment Strategies event went off without a hitch. The online roundtable, hosted by AM Research (AMR) and Cantor Fitzgerald, dug into the latest trends and…
Printing Money Episode 23: Additive Manufacturing Deal Analysis with Alex Kingsbury
Episode 23 is here, and it’s chock-full. Alex Kingsbury, nLIGHT Market Development Manager and, not to mention, co-creator of the Printing Money podcast, re-joins Danny and the result is 60…
U.S. Government Boosts Advanced Manufacturing with Three New Developments
Though the traction began building before the 2020 election, the Biden Administration has rolled out a slew of overarching initiatives that are reshaping how the U.S. will look going forward….
Formnext 2023 Day 1: Wheat Beer and Chaff
I fall from the clouds. O, to be back in Frankfurt again. Each arrival presents a new fragment of the airport ceiling, dismantled and fenced off. Amidst the exposed sprinklers,…
Conflux Enters Serial Production of 3D Printed Heat Exchangers for AMCM M 4K 3D Printers
Conflux Technology, the Australia-based specialist in heat exchangers made with metal additive manufacturing (AM), has begun serial production of argon gas heat exchangers for the AMCM M 4K 3D printer….
3D Printing News Briefs, April 27, 2023: ChatGPT, Heat Exchangers, & More
We’re kicking things off in 3D Printing News Briefs today with the hiring of a new regulatory consultant to support RadTech and PAMA. Then, Ivaldi has released a ChatGPT-enabled digital…
3D Printing News Unpeeled: Better Air Conditioning Through 3D Printing, Conflux and Fortify
Fortify secures an investment from Lockheed Martin Ventures. Initially Fortify focused on tooling inserts which I thought was silly and would not see them become a viable company. I said…
3D Printing News Briefs, November 5, 2022: Recycled Titanium, Titanium Implants & More
In today’s 3D Printing News Briefs, we have plenty of additive manufacturing facility news from IperionX, Boeing, and GKN Aerospace. Moving on, GA-ASI continues its AM work with Conflux, and…
3D Printing News Unpeeled: Boeing, Bauer, DBSchenker, Glidewell and Twikit
DB Schenker is to start a digital warehouse solution that lets you 3D print locally while they identify the right 3D printed parts, qualify them and qualify them. AM4AM is…
3D Printing News Unpeeled: General Atomics, SLA on Textile, Dyze Design
General Atomics works with Conflux to 3D print Fuel Oil Heat Exchanger (FOHE) for the MQ-9B. The company also says that it saves $2 million on tooling and $300,000 in…
3D Printing News Unpeeled, Live with Joris Peels Wednesday 24th of August
We’re talking today about Shapeways getting a warning from the NYSE, 3D printed glow in the dark camouflage made using Direct Write, a grant to develop a blue laster 3D…
Conflux Reaches for Mass Customization with New 3D Printed Heat Exchanger Line
Conflux has specialized in making heat exchangers since its inception. Previously, the company collaborated with GKN to make its technology available in Europe. We interviewed CEO Michael Fuller, including on…
GKN and Conflux Join Forces on 3D Printed Heat Exchangers
Conflux Technology and GKN Additive have announced that they will collaborate on the development and production of 3D printed heat exchangers. One of the most indispensable industrial components for a…
3D Printing News Briefs, March 17, 2022: Software, Business, & More
In today’s 3D Printing News Briefs, we’re starting with software, as Senvol demonstrated a machine learning approach to material property allowables development as part of a USAF-funded study. Conflux Technology…
3D Printing News Briefs, January 20, 2022: Metals, Fiber Batteries, & More
Starting with material news in today’s 3D Printing News Briefs, Velo3D has qualified a new superalloy for its Sapphire 3D printers. Equipment manufacturer PGV is saving time and money with…
3DPOD Episode 89: 3D Printing Heat Exchangers with Conflux’s Michael Fuller
Conflux is one of the 3D printing startups that I’m the most excited about. With $6 million in recent funding, the company is using its own methods, designs, and expertise…
Interview with Michael Fuller, CEO of 3D Printed Heat Exchanger Firm Conflux Technology
Michael Fuller heads up Conflux Technology, an Australian firm that uses powder bed fusion to make heat exchangers for automotive, racing, power electronics, power generation, and aerospace. The company has…
Conflux Gets $6M in Series A Round from AM Ventures for 3D Printed Heat Exchangers
Australian heat change company Conflux Technology has just received an AUD $8.5 million (around $6.3 USD) Series A round from AM Ventures and Acorn Capital. Conflux designs and manufactures heat…
