boeing

3D Printing News Briefs, October 6, 2021: Business, Guns, & Bridges

We’re starting with a little business in today’s 3D Printing News Briefs, as EPLUS 3D and Shining 3D have issued a joint declaration. Optomec received an order from an OEM…

RAPID + TCT 2021 Keynotes: 3D Printing in Aerospace, Medical, & More

At the start of SME’s 30th year of RAPID + TCT, widely known as North America’s largest, most important additive manufacturing event, AM consultant and writer Todd Grimm got things…

Featured

RAPID + TCT 2021 Day 1: FormAlloy, Protolabs, Dyndrite, & More

Finally, after what felt like a very long, long time, North America’s largest, most influential additive manufacturing (AM) event got back to business! The 30th edition of RAPID + TCT…

Sponsored

3D Printing Keynotes, Thought Leadership Panels, 250+ Exhibitors, & More at RAPID + TCT 2021

Everybody who’s anybody in the additive manufacturing industry is getting ready for RAPID + TCT 2021, being held at McCormick Place in Chicago from September 13-15. This is the 30th…

Boeing and Partners Establish Fully Controlled Distributed 3D Printing Network

Relying on a digital platform from Assembrix, Boeing, EOS, BEAMIT,  and 3T Additive Manufacturing have established a fully controlled distributed 3D printing network across continents. The network was able to…

Hug the Panda, Part 7: Wide Body Aircraft

In the previous article, we saw how China’s current inability to make the best and newest jet engines was slowing its independence. In order to truly be its own master…

Sponsored

Over 100 Expert Speakers to Present on Additive Manufacturing at RAPID + TCT 2021

There’s now less than a month before the all-important, in-person RAPID + TCT 2021 event comes to McCormick Place in Chicago from September 13-15 for its 30th year. The annual…

Sponsored

RAPID + TCT Celebrate 30th Year with More 3D Printing Presentations, Speakers, & Exhibitors

I think it’s safe to say that last year, we all missed the industry juggernaut that is RAPID + TCT, North America’s largest, most important additive manufacturing event. But now…

AML3D to 3D Print Large-Scale Metal Tool for Boeing

Aussie company AML3D Limited (ASX:AL3) has received an order from The Boeing Company to 3D print a large-scale tool for the aerospace manufacturer. This is AL3D’s first order from Boeing,…

Featured

Relativity Space’s Factory of the Future Begins with 23-Acre Facility

Relativity Space, the first company to 3D print an entire rocket and build the largest metal 3D printer in the world, has revealed plans for a major expansion of its…

3D Printing Webinar and Virtual Event Roundup: March 21, 2021

We’ve got over ten different webinars, online trainings, and virtual events to tell you about in this week’s roundup, covering topics from 3D modeling and electroplating to 3D scanning and…

Burloak First in Industry to Meet Boeing Specification for 3D Printing Aluminum

Burloak Technologies Inc. has become the first company to achieve Boeing’s BAC 5673 specification for the 3D printing of aluminum AlSi10Mg components. This marks a substantial gain for the service…

3D Printing News Briefs, January 14, 2021: SRTI Park & CyBe Construction, L&T Construction, ASTM International

We’re starting things off with a little construction 3D printing in today’s News Briefs, and then moving on to business. The first 3D printed, functional villa in the Middle East…

Norsk Titanium Delivers 3D Printed Titanium Components for Boeing 787 Dreamliner

Additive manufacturing company Norsk Titanium US Inc. (Norsk) specializes in structural, aerospace-grade titanium components, and was actually the first to have its 3D printed titanium structural components approved by the…

Boeing to Open New 3D Printing R&D Facility in Scotland with NMIS

Cash just continues to be infused into 3D printing, particularly in aerospace, with the introduction of new facilities continuing around the world. Now, the National Manufacturing Institute Scotland (NMIS) in…

Featured

Wi3DP Panel: Experts Discuss Impact of Aerospace 3D Printing on Industry

During a virtual panel by Women in 3D Printing (Wi3DP), three leading experts in additive manufacturing (AM) for aerospace addressed the impact of the technology across the industry. Hosted by…

3D Printing Webinar and Virtual Event Roundup, July 19, 2020

A variety of topics will be covered in this week’s webinar and virtual event roundup, including additive manufacturing in aerospace, CAMWorks, product management, post-processing, and more. Read on to learn…

3D Printing and COVID-19, April 30, 2020 Update

Companies, organizations and individuals continue to attempt to lend support to the COVID-19 pandemic supply effort. We will be providing regular updates about these initiatives where necessary in an attempt to ensure…

3D Printing and COVID-19, April 4, 2020 Update

Companies, organizations and individuals continue to attempt to lend support to the COVID-19 pandemic supply effort. We will be providing regular updates about these initiatives where necessary in an attempt…

Boeing 777x Takes First Flight with over 600 3D-Printed Parts

Sunday saw the maiden flight of the Boeing 777X, marking an important date in the history of 3D printing for the twin GE9X engines driving the aircraft. Each GE9X features…

Tuskegee University Selected by NASA to Advance Additive Manufacturing in Aerospace

The aerospace industry is a trendsetter when it comes to manufacturing. It is a major industry that evolved its expertise into lighter material, efficient engines and overall safer machines. Leveraging…

Morf3D Secures Round of Funding with Boeing, Driven by High Customer Demand

More news for the aerospace sector shows that Morf3D, established in 2015, continues to act as a leader within the industry, offering metal 3D printing and additive manufacturing processes to…

3D Printing Industry Experts Interview: Jeffrey DeGrange of Impossible Objects

This is a short interview with Jeffery DeGrange, the Chief Commercial Officer at Impossible Objects. He has a great amount of experience with the manufacturing sector and he gives good insight into what America is trying to do in order to address a skills gap with workers.

Presentations on 3D Printing Trends and Projects at RAPID 2019

I didn’t just visit companies at their booths during the recent RAPID + TCT – I made time in my schedule to attend a few interesting sessions as well, including…