startup

Nexa3D Hires Sarah Goehrke to Head 3D Printing Communications and Ecosystems

Former 3DPrint.com Editor-in-Chief Sarah Goehrke has a special place in our hearts, so it’s always exciting to see her new positions in the industry. Just recently, Sarah took the role…

3D Printing News Briefs, September 9, 2021: Events, Materials, & More

In today’s 3D Printing News Briefs, the first Formnext + PM South China finally opens this week. In materials news, a biomedical company introduced what it calls the first purified…

Startup Accelerator, Singapore: Desalination, Diet Supplements, and Space 3D Printing

In this fourth installment of Singapore Startups, we’re looking at startup firms from Singapore. Will the tiny nation become an epicentre for 3D printing? What is actually happening in Singapore…

Concrete 3D Printing and Robots: Diamond Age Receives $8M in Seed Funding

Yet another additive construction startup is joining the increasingly competitive, yet still niche segment. Diamond Age is presenting itself as a “full stack robotics” firm aiming to automate the construction…

Three Rocket Lab Spacecraft with 3D Printed Engines Ordered by Varda Space

Rocket engine 3D printing firm Rocket Lab has signed a significant deal with Varda Space Industries, agreeing to provide the new space startup with three of its Photon spacecraft for…

 Aleph Farms Secures $105M to Scale Cultivated Meat Technology Ahead of 2022 Launch

The Israeli foodtech startup that 3D printed the first slaughter-free beef steak in space has raised $105 million in funding. Aleph Farms uses bioprinting technology and real cow cells, without…

Sponsored

Start Up, Filament Hub, Provides a Change of Pace with Membership Discount Club 3D Printing Filament!

Finding quality and low-priced 3D Printer Filament can be tough. Especially when there are so many different filaments to analyze and test. Filament Hub is a new startup operating just…

Featured

Inkbit Launches Inkbit Vista Closed-Loop, Automated 3D Printer

If like this author you have been awaiting the launch of the first commercial 3D printer from Inkbit, then today is your day. The Massachusetts-based startup has officially announced its…

Featured

Single-Piece 3D Printed Rocket Engine Passes Fire Test in India

Indian space startup AgniKul Cosmos has developed and test-fired a fully 3D printed rocket engine. Produced as a single component in one run, the higher stage semi-cryogenic liquid propulsion engine…

Fictiv Raises $35M from Honeywell, Others to Expand Digital Manufacturing Ecosystem

San Francisco-based startup Fictiv has taken on $35 million in a funding round led by 40 North Ventures, with participation from Honeywell, Sumitomo Mitsui Banking Corp., Adit Ventures, and M20…

Featured

Construction 3D Printing Mighty Buildings Raises $40M in Series B

Oakland startup Mighty Buildings is already building up hopes for additive construction in the U.S. After garnering a great deal of attention in the past year for its “beautiful, sustainable…

New Jersey Startup 3D Prints Baby Sculptures for Families Enduring Pregnancy or Infant Loss

According to the CDC, there are about 3,500 sudden unexpected infant deaths (SUID) in the United States, which, frustratingly, have no immediately obvious cause, and I cannot imagine how devastating this…

LightForce Orthodontics Raises $14M for Custom 3D Printed Braces

They’re not fun by any stretch of the imagination, but getting braces is a rite of passage for many teenagers. While this hasn’t changed for many years, neither has the…

3D Printing A Meatless World: Ersatz in 3D Printed Food

3D printing food is seen as a sideshow by most in our industry. When we have dug deep into food 3D printing or looked at 3D printed salmon, 3D printed…

Featured

3D Printing Unicorn Desktop Metal to Go Public After Reverse Merger Deal

After becoming one of the fastest-growing 3D printing startups, Desktop Metal announced plans to go public following a reverse merger deal with blank check company Trine Acquisitions. The Boston-based metal…

Featured

3DTrust Releases Intelligent Powder Management Solution for Quality Control

3DTrust is a five-year-old startup that began in Munich. In the beginning, the team was one of a crop of startups that wanted to secure the digital supply chain. Through…

Velo3D Secures Further $12M in Funding for Metal 3D Printing

After already securing $28 million in a series-D round of investment just this April, Velo3D has announced an additional $12 million in funding for the series. This brings the total…

3D Printing News Briefs: May 12, 2020 Nanofabrica, Voxeljet, Elementum, AMPOWER

We’re all business today in 3D Printing News Briefs – Nanofabrica has raised $4 million in funding, and voxeljet is expanding its presence in India. Elementum 3D has achieved an…

Inventia Life Science Empowers Researchers to Rapidly Scale 3D Cell Culture

No disease has ever been as overwhelming as cancer. Not only does it kill close to 10 million people every year, but even though we still fail to understand how…

3D Printing News Briefs: April 9, 2020

In today’s 3D Printing News Briefs, we start with some announcements from AMPOWER, including its new cost calculator for metal 3D printed parts. Moving on, a German startup will soon…

Fortify Expands Composites 3D Printing with Continuous Kinetic Mixing System

Fortify is one of a number of startups that are developing unique technologies for 3D printing composites. While we await the commercial release of the company’s digital light processing (DLP)…

Exclusive Interview: Chitonous Hopes to Use Ubiquitous Biological Polymers for Manufacturing

I can’t remember when a startup so excited me as Chitonous does. This one is a long shot but it could fundamentally change how we design and consume materials for…

Interview with Wei Jian Goh of Craft Health on Personalized Medicine and Nutrition

Wei Jian Goh’s startup Craft Health makes personalized medicine and nutrition possible. The startup is one I’m very envious of as I’ve had a lot of ideas in this area…