3d printing partnerships

German and Canadian Organizations Partner to Develop 3D Printed Contractile Tissue

German and Canadian Organizations Partner to Develop 3D Printed Contractile Tissue

It’s been a big week for bioprinting, with news of planned 3D printed organs coming from both Prellis Biologics and BIOLIFE4D. The bioprinting world is one that doesn’t slow down, and a new research collaboration between multiple major players in the field is set to continue advances. Canadian company Aspect Biosystems is partnering with German InSCREENeX as well […]

It’s been a big week for bioprinting, with news of planned 3D printed organs coming from both Prellis Biologics and BIOLIFE4D. The bioprinting world is one that doesn’t slow down, and a new research collaboration between multiple major players in the field...
Renishaw and Infosys Team Up to Lower the Additive Manufacturing Entry Barrier

Renishaw and Infosys Team Up to Lower the Additive Manufacturing Entry Barrier

It can be intimidating for manufacturers to adopt new technologies, and even more intimidating to implement them at a large scale. Part of the reason that additive manufacturing hasn’t become more widespread is that entry barrier; many companies just aren’t sure how to begin incorporating the technology, much less use it for large-volume production. Many […]

It can be intimidating for manufacturers to adopt new technologies, and even more intimidating to implement them at a large scale. Part of the reason that additive manufacturing hasn’t become more widespread is that entry barrier; many companies just...
ORNL and Senvol Partner for Additive Manufacturing Data Generation Project

ORNL and Senvol Partner for Additive Manufacturing Data Generation Project

It’s somewhat of an understatement to say that a lot of 3D printing research takes place at Oak Ridge National Laboratory (ORNL). The facility is constantly making headlines for its groundbreaking work, much of it involving 3D printing in some form. The 3D printing work that takes place there is almost always for highly precise, important […]

It’s somewhat of an understatement to say that a lot of 3D printing research takes place at Oak Ridge National Laboratory (ORNL). The facility is constantly making headlines for its groundbreaking work, much of it involving 3D printing in some form. The 3D...
Prodways Group Acquires Interson-Protac, Announces Two New Distribution Partnerships

Prodways Group Acquires Interson-Protac, Announces Two New Distribution Partnerships

For more than 40 years, French company Interson-Protac has been a leader in the field of audiology. The company specializes in ear tips for hearing aids and noise protection devices, which are custom made based on impressions taken of the wearer’s ear canal. It’s a process that would lend itself very well to 3D printing, […]

For more than 40 years, French company Interson-Protac has been a leader in the field of audiology. The company specializes in ear tips for hearing aids and noise protection devices, which are custom made based on impressions taken of the wearer’s ear canal....
HP and Siemens Deliver New Additive Manufacturing Software Module

HP and Siemens Deliver New Additive Manufacturing Software Module

Siemens and HP have been working together for some time now. Siemens has been one of HP’s primary partners in its mission to transform 3D printing from a prototyping to a production technology, and its software has been integral in the development and scaling of HP Multi Jet Fusion technology. Now the two companies are […]

Siemens and HP have been working together for some time now. Siemens has been one of HP’s primary partners in its mission to transform 3D printing from a prototyping to a production technology, and its software has been integral in the development and scaling of...
Sculpteo and ZBrush Partner for One-Click 3D Printing

Sculpteo and ZBrush Partner for One-Click 3D Printing

There are a lot of different 3D modeling programs out there, each offering something a little different to appeal to different tastes. One of the most popular is ZBrush, which is well-loved because it takes a different approach to 3D modeling. Rather than using CAD, ZBrush appeals more to traditional artists by letting users “sculpt” […]

There are a lot of different 3D modeling programs out there, each offering something a little different to appeal to different tastes. One of the most popular is ZBrush, which is well-loved because it takes a different approach to 3D modeling. Rather than using CAD,...
HP and Deloitte: Allies in 3D Printing-Led Disruption to Manufacturing

HP and Deloitte: Allies in 3D Printing-Led Disruption to Manufacturing

There’s a great deal of optimism and ambition in additive manufacturing today as the growing industry looks toward tomorrow. HP Inc. has long been on record as saying it was entering the field especially to disrupt the status quo not only in 3D printing, but in manufacturing overall. As ambitious as the aim is, HP […]

There’s a great deal of optimism and ambition in additive manufacturing today as the growing industry looks toward tomorrow. HP Inc. has long been on record as saying it was entering the field especially to disrupt the status quo not only in 3D printing, but in...
Sigma Labs Expands 3D Printing Software Solution, Focusing on Partnerships and Executive Structure for Growth

Sigma Labs Expands 3D Printing Software Solution, Focusing on Partnerships and Executive Structure for Growth

As 3D printing technologies continue to spread across the globe, management solutions are a major concern for those operations adopting additive manufacturing into their workflow. Sigma Labs has been at the fore of software solutions with their well-known PrintRite3D offering, frequently expanding its reach with additional partnerships and agreements set to increase its availability. Just […]

As 3D printing technologies continue to spread across the globe, management solutions are a major concern for those operations adopting additive manufacturing into their workflow. Sigma Labs has been at the fore of software solutions with their well-known PrintRite3D...
RESA Wearables Brings Custom 3D Printed Insoles to Kiosks Around China

RESA Wearables Brings Custom 3D Printed Insoles to Kiosks Around China

Insoles aren’t expensive, and they can be purchased at most shoe stores and pharmacies to help with foot pain and discomfort. Depending on their quality, off-the-shelf insoles do provide some degree of comfort, but they don’t fully address many issues, leaving wearers vulnerable to further problems in the future. That’s why custom 3D printed insoles […]

Insoles aren’t expensive, and they can be purchased at most shoe stores and pharmacies to help with foot pain and discomfort. Depending on their quality, off-the-shelf insoles do provide some degree of comfort, but they don’t fully address many issues,...
The Department of Defense & Youngstown Business Incubator Weigh In on 3D Printing in the US

The Department of Defense & Youngstown Business Incubator Weigh In on 3D Printing in the US

As additive manufacturing continues to see increased use around the globe, national strategies for adoption of the technology are becoming a bigger focus for governments seeking to ensure that they are not left behind in the next industrial revolution. With support and funding from the government, efforts have a better chance for expanding and disrupting […]

As additive manufacturing continues to see increased use around the globe, national strategies for adoption of the technology are becoming a bigger focus for governments seeking to ensure that they are not left behind in the next industrial revolution. With support...
America Makes Celebrates 5 Years Advancing 3D Printing: Exclusive Interview with Executive Director Rob Gorham

America Makes Celebrates 5 Years Advancing 3D Printing: Exclusive Interview with Executive Director Rob Gorham

Established in 2012, America Makes is the United States’ national accelerator for additive manufacturing and 3D printing, leading the way in dedicated public-private partnerships in technology research, discovery, creation, and innovation. To celebrate its fifth anniversary, on Wednesday, August 16th the institute held a birthday party in honor of half a decade of growth in […]

Established in 2012, America Makes is the United States’ national accelerator for additive manufacturing and 3D printing, leading the way in dedicated public-private partnerships in technology research, discovery, creation, and innovation. To celebrate its fifth...
JETA Enterprises Becomes Latest Manufacturer's Representative for Sigma Labs' 3D Printing Services

JETA Enterprises Becomes Latest Manufacturer's Representative for Sigma Labs' 3D Printing Services

In terms of expansion and new partnerships, Sigma Labs is one of the busiest companies in the 3D printing industry. It seems to be on nearly a monthly basis that the company is announcing that it has signed a new distributor or other partner, and this month is no exception. Sigma Labs is now expanding […]

In terms of expansion and new partnerships, Sigma Labs is one of the busiest companies in the 3D printing industry. It seems to be on nearly a monthly basis that the company is announcing that it has signed a new distributor or other partner, and this month is no...
Chemical Giant Increases Focus on Additive Manufacturing with Creation of BASF 3D Printing Solutions GmbH

Chemical Giant Increases Focus on Additive Manufacturing with Creation of BASF 3D Printing Solutions GmbH

Global chemical giant BASF isn’t new to 3D printing. The company has been increasingly involved in high-profile partnerships in additive manufacturing, including significant work with HP’s new Multi Jet Fusion technology and Essentium Materials’ new FlashFuse technology. BASF has expanded on these partnerships, telling us more about their rising commitment to the materials at play in […]

Global chemical giant BASF isn’t new to 3D printing. The company has been increasingly involved in high-profile partnerships in additive manufacturing, including significant work with HP’s new Multi Jet Fusion technology and Essentium Materials’ new...
Dassault Systèmes' 3DEXPERIENCE Soars with Billion-Dollar Boeing Partnership, Educational Adoption for Tomorrow's Aerospace Workforce

Dassault Systèmes' 3DEXPERIENCE Soars with Billion-Dollar Boeing Partnership, Educational Adoption for Tomorrow's Aerospace Workforce

In 1986, aviation powerhouse Boeing turned to CATIA software from Dassault Systèmes for the design and manufacture of new airplanes. A few decades on, 3D technologies have become a staple tool in Boeing’s toolbox as the company has employed digital simulation as well as 3D printing as it continues to propel aviation into the 21st century. […]

In 1986, aviation powerhouse Boeing turned to CATIA software from Dassault Systèmes for the design and manufacture of new airplanes. A few decades on, 3D technologies have become a staple tool in Boeing’s toolbox as the company has employed digital simulation as...
Family of the Future: Unprecedented Collaboration Brings 29 Partners Together to Advance Additive Manufacturing

Family of the Future: Unprecedented Collaboration Brings 29 Partners Together to Advance Additive Manufacturing

No single company will propel 3D printing technology to its full potential; the industry around additive manufacturing will have to come together for a realizable future. The necessity of collaboration is increasingly coming into focus, and Belgium is among the countries specifically heralding co-creation in additive manufacturing. The biggest theme underscoring this spring’s Materialise World […]

No single company will propel 3D printing technology to its full potential; the industry around additive manufacturing will have to come together for a realizable future. The necessity of collaboration is increasingly coming into focus, and Belgium is among the...
3D Printing Spotlight On: Shayne Denston, President, Superior 3D Solutions

3D Printing Spotlight On: Shayne Denston, President, Superior 3D Solutions

Growth is rarely linear, whether in business or personal professional development; that’s not to say, though, that that growth cannot be highly focused. Few participants in the additive manufacturing industry set off on a path to knowingly dive into a career in 3D printing — I know I didn’t — and for many, an unexpected […]

Growth is rarely linear, whether in business or personal professional development; that’s not to say, though, that that growth cannot be highly focused. Few participants in the additive manufacturing industry set off on a path to knowingly dive into a career in...
PrintRite3D INSPECT to Receive New Architecture Platform as Sigma Labs Partners with OXYS

PrintRite3D INSPECT to Receive New Architecture Platform as Sigma Labs Partners with OXYS

Sigma Labs, headquartered in Santa Fe, has built an intricate network of partnerships throughout the world—and it just keeps expanding. Most recently we followed as the QA specialist company announced it would be contracting with Honeywell Aerospace, joining with Morf3D, collaborating with Jaguar Precision Machine Corporation, and also receiving a contract from Solar Turbines for […]

Sigma Labs, headquartered in Santa Fe, has built an intricate network of partnerships throughout the world—and it just keeps expanding. Most recently we followed as the QA specialist company announced it would be contracting with Honeywell Aerospace, joining with...
Caterpillar Invests $2 Million in Fastbrick Robotics' Brick-Laying Variation on 3D Printing

Caterpillar Invests $2 Million in Fastbrick Robotics' Brick-Laying Variation on 3D Printing

Caterpillar has been around for a long time and has built up a solid reputation in the manufacturing world. Despite its foundation in traditional manufacturing technologies, however, the company is heavily invested in new technology as well, particularly 3D printing. Recently Caterpillar made a commitment to further develop its metal additive manufacturing processes with the […]

Caterpillar has been around for a long time and has built up a solid reputation in the manufacturing world. Despite its foundation in traditional manufacturing technologies, however, the company is heavily invested in new technology as well, particularly 3D printing....
ATI Partners with GE Aviation to Develop Meltless Titanium Alloys for 3D Printing

ATI Partners with GE Aviation to Develop Meltless Titanium Alloys for 3D Printing

Every metal used in manufacturing, and 3D printing in particular, has its unique benefits, but titanium is an especially popular material for a number of reasons. It’s the go-to metal for medical implants, thanks to its strength, light weight, corrosion resistance and biocompatibility, and those characteristics (minus the biocompatibility) also make it a highly desirable […]

Every metal used in manufacturing, and 3D printing in particular, has its unique benefits, but titanium is an especially popular material for a number of reasons. It’s the go-to metal for medical implants, thanks to its strength, light weight, corrosion...
3D Printing News Briefs: June 24, 2017

3D Printing News Briefs: June 24, 2017

In this week’s second edition of 3D Printing News Briefs, we have some more partnership announcements in what has become a partnership-heavy week, as well as a couple of 3D printed devices that have received FDA clearance. Nanyang Technological University, Singapore has partnered with PTT Global Chemical for the development of advanced 3D printing materials for […]

In this week’s second edition of 3D Printing News Briefs, we have some more partnership announcements in what has become a partnership-heavy week, as well as a couple of 3D printed devices that have received FDA clearance. Nanyang Technological University,...
A Busy Week for GKN Aerospace: Agreements for Metal Additive Manufacturing, Testing 3D Printed Components

A Busy Week for GKN Aerospace: Agreements for Metal Additive Manufacturing, Testing 3D Printed Components

It’s been a news-heavy week for several companies, and GKN Aerospace is no exception. This week, the company announced that it has signed a five-year research agreement with Oak Ridge National Laboratory (ORNL). Under the terms of the $17.8 million agreement, the two organizations will utilize ORNL’s Manufacturing Demonstration Facility (MDF) to work on advancing the industrialization of […]

It’s been a news-heavy week for several companies, and GKN Aerospace is no exception. This week, the company announced that it has signed a five-year research agreement with Oak Ridge National Laboratory (ORNL). Under the terms of the $17.8 million agreement,...
GE Additive and Oerlikon Team Up to Advance Industrialization of 3D Printing

GE Additive and Oerlikon Team Up to Advance Industrialization of 3D Printing

2017 has been the year of partnerships for Oerlikon. The Swiss company has been pursuing additive manufacturing with new intensity over the past six months or so, opening a new advanced materials manufacturing facility towards the end of 2016 and forming 3D printing research partnerships earlier this year. This week, Oerlikon has been busy attending the […]

2017 has been the year of partnerships for Oerlikon. The Swiss company has been pursuing additive manufacturing with new intensity over the past six months or so, opening a new advanced materials manufacturing facility towards the end of 2016 and forming 3D printing...
Additive Industries' MetalFAB1 Metal 3D Printing System Hits the Racetrack with Sauber F1 Team

Additive Industries' MetalFAB1 Metal 3D Printing System Hits the Racetrack with Sauber F1 Team

The MetalFAB1 has been in development for some time, as Netherlands-based Additive Industries first announced their intent to create an industrial solution to bring metal 3D printing ‘from lab to fab’ back in 2012 and has been hard at work since to deliver their scalable, customizable metal additive manufacturing system. The first systems were unveiled in late […]

The MetalFAB1 has been in development for some time, as Netherlands-based Additive Industries first announced their intent to create an industrial solution to bring metal 3D printing ‘from lab to fab’ back in 2012 and has been hard at work since to deliver...
HP's Expansion Takes Multi Jet Fusion 3D Printing to Japan

HP's Expansion Takes Multi Jet Fusion 3D Printing to Japan

HP wants to have the 3D printing technology heard ’round the world, and with their spate of recent expansions the company is making major headway across the globe. Just a week ago, HP followed through on plans revealed at RAPID to scale up its Multi Jet Fusion 3D printing platform, which had been publicly introduced a […]

HP wants to have the 3D printing technology heard ’round the world, and with their spate of recent expansions the company is making major headway across the globe. Just a week ago, HP followed through on plans revealed at RAPID to scale up its Multi Jet Fusion...
3D Printing Partnerships Dominate News from Norsk Titanium

3D Printing Partnerships Dominate News from Norsk Titanium

There are few companies that have been busier lately than Norsk Titanium. In the last few days, the additive manufacturing company and creator of Rapid Plasma Deposition (RPD) technology made a slew of announcements, most of them relating to partnerships advancing the use of RPD technology in the aerospace and other industries. Let’s take a […]

There are few companies that have been busier lately than Norsk Titanium. In the last few days, the additive manufacturing company and creator of Rapid Plasma Deposition (RPD) technology made a slew of announcements, most of them relating to partnerships advancing the...

Newsletter Signup Form

Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
  • This field is for validation purposes and should be left unchanged.