Startup Accelerator Series

Startup Accelerator: FITme Revolutionizes Cosmetic Surgery with 3D Printing

In additive manufacturing (AM), the personalized medical implant market is burgeoning, presenting an unprecedented opportunity within the aesthetic sector. This niche is ripe for disruption, with 3D printing offering tailored…

Startup Accelerator: Pioneering Digital Dentistry at LuxCreo

As we enter 2024, I am excited to commence a fascinating journey of exploring the stories of innovative startups in the additive manufacturing (AM) field through exclusive interviews. With a…

PRO

Where Have All AM’s Unicorns Gone?

In the rapidly evolving world of 3D printing, startups valued at over a billion dollars, known as unicorns, once seemed as fantastical as the mythical creatures themselves. While a few…

Startup Accelerator – Axtra3D Talks the Best of Both Worlds: SLA + DLP 3D Printing

While the world of vat photopolymerization has undergone some serious evolution over the past decade, it’s likely that we’re only seeing the tip of the iceberg in terms of where…

LatticeRobot Launches a Home for Lattices, Metamaterials, and Textures

At the CDFAM computational design (+DfAM) symposium this week, a startup dedicated to lattice software, LatticeRobot, was launched. LatticeRobot is also the first Gradient Control Labs, an incubator that facilitates…

Featured PRO

Startup Accelerator: The 10 Most Active VCs in 3D Printing

The startup scene in 3D printing may be small compared to tech at large, but, as additive manufacturing (AM) increases in quality and importance, the number of firms to enter…

Slurry Metal 3D Printing with MetShape – AMS Focus

AM Ventures is the Networking Sponsor for the Bavarian Beer & Pretzels Networking Reception at the Additive Manufacturing Strategies, business summit February 7-9, 2023. In order to more deeply understand…

Featured

The 19 Most Famous Angel Investors in 3D Printing

You may have the greatest idea in the world and just need that small investment of faith to launch it into a fully-fledged business. If a single individual, perhaps with…

Startup Accelerator: TOffeeAM Gets £5M for 3D Printing Generative Design Software

Two years ago, UK-based TOffeeAM raised £1 million pounds to develop its generative design tool for 3D printing. Now, in a round led by Presidio Ventures Europe and East Innovate,…

Startup Accelerator: Quantica Disrupts Inkjet 3D Printing with JetPack Development Platform

In addition to Grid Logic, the most exciting firm presenting at RAPID + TCT 2022 was Quantica. This Berlin-based startup, previously covered here, showcased its new JetPack, a sort of…

Startup Accelerator, Singapore: Dental 3D Printing, Services, and More

This is the eighth article detailing the 3D printing startup scene in Singapore. Teehee Dental Works Teehee Dental Works is a dental lab and dentist with a difference. Along with…

Startup Accelerator, Singapore: Medical, Wearables, and Low-Cost 3D Printing

In this installment of our series, we are looking at the Singapore 3D printing ecosystem. By giving you an overview of some of the 3D printing startups in Singapore, we…

Startup Accelerator, Singapore: Bioprinted Meat, Dental 3D Printing, and Security

In this ongoing review of startup companies in Singapore we still have more startups to share! Shiok Meats Shiok Meats is a cell-based sea food company that acquired Gaia Foods,…

Startup Accelerator, Singapore: Zenyum, Star3D, 3D Metal Forge

In this third installment of Startup Accelerator, Singapore, we’ll be looking at the ship-and-noodle loving nation state’s 3D printing startup community. Zenyum Zenyum is a direct competitor to Align Technology…

Startup Accelerator, Singapore: Hyperganic, Molyworks, Additive Flight Solutions

In this series, we’re looking at the startup scene in Singapore by identifying some of the 3D printing companies being founded and grown there. Hyperganic Hyperganic always kind of confuses…

Startup Accelerator, Singapore: 3D Printed Magnets, Noodles, and Implants

One of the countries that is doing a bang-up job of stimulating the 3D printing sector is Singapore. Through Nanyang Technological University’s National Additive Manufacturing – Innovation Cluster (NAMIC) coordinating…

Startup Accelerator: Holo Wants to 3D Print Millions of Copper Heatsinks Annually

I’m very excited about Holo, a company that aims to take a slurry digital light processing (DLP) technology to sinter metal parts to the heatsinks industry. By creating cost-effective, topology-optimized…

Startup Accelerator: Arris Composites Takes a New Approach to 3D Printing Carbon Fiber

Composites have always been a whiz bang technology that can lightweight things and give them excellent strength to weight. Widely deployed in niche applications, composites, including carbon fiber-reinforced materials, are…

Startup Accelerator: Ursa Major is 3D Printing Rocket Engines to Grow Space Economy

In the next decades, the space economy will drive advances in innovation, technology, and manufacturing. In 2020, space leaders like Aerojet Rocketdyne, Made In Space, and SpaceX hit new milestones…

Startup Accelerator: 9T Labs Seeks to Make Carbon Fiber 3D Printing Go Industrial

Startup Accelerator is an article series with a focus on new and exciting companies in the 3D printing space, in which 3DPrint.com speaks to startup leadership about their unique technologies…

Featured

Startup Accelerator: Volumetric Aims to Be the Tissue Bioprinting Farm of the Future

Startup Accelerator is an article series with a focus on new and exciting companies in the 3D printing space, in which 3DPrint.com speaks to startup leadership about their unique technologies…