Benny Buller
Ready for 2024: Additive Manufacturing Strategies Gears up to Revolutionize 3D Printing Industry Again
Additive Manufacturing Strategies (AMS) has set the stage for another groundbreaking conference, slated for February 6-8, 2024. After a banner year that surpassed all expectations, the seventh installment is poised…
3D Printing Financials: The Highlight of Additive Manufacturing Strategies 2024
After a resounding success this year, Additive Manufacturing Strategies (AMS) is already ramping up for an impactful 2024 event, scheduled for February 6-8. The seventh edition of this essential industry…
Former EOS CEO Adrian Keppler Joins Velo3D Board to Fortify European Ambitions in 3D Printing
In a significant step to fortify its international presence, Velo3D (NYSE: VLD) announced the appointment of 3D printing expert Adrian Keppler to its Board of Directors. With over a decade…
Avio Harnesses Velo3D’s 3D Printing for Space Propulsion
During one of the aviation world’s largest shows, Velo3D (NYSE: VLD) announced the sale of two of its advanced metal 3D printers to Italian space propulsion manufacturer Avio (BIT: AVIO)….
3D Printing Financials: Velo3D Revenue Up 120%; Earnings per Share Lag Behind
Velo3D (NYSE: VLD) saw its revenue escalate 120 percent to $26.8 million, falling within the company’s expectations and Wall Street’s consensus. However, as the sequential revenue growth continues, Velo3D reported…
3D Printing Financials: Velo3D Makes Killer Q4 Earnings
Claiming to be the fastest-growing company in the metal additive manufacturing (AM) industry, Velo3D (NYSE: VLD) reported one of its strongest quarterly results in history. The California-based business revealed revenue…
Velo3D Metal AM Webinar Powered by 3DPrint.com
3DPrint.com will host a new Velo3D (NYSE: VLD) webinar titled “Unlocking the Potential of Metal AM: Strategies for Scaling Production with Velo3D” to discuss the roadblocks to successfully scaling metal…
AMS 2023: The Only 3D Printing Event in New York Begins with Metal AM Discussion
Additive Manufacturing Strategies (AMS) 2023 has kicked off its annual 3D printing event in New York, introducing new speakers and interactive discussions on important topics like challenges in metal AM…
3DPrint.com to Host Velo3D Webinar on Metal AM
In 2022, the metal additive manufacturing (AM) segment witnessed steady growth even though companies worldwide reported challenging macroeconomic conditions and changing customer behavior as the pandemic and the Russian invasion…
2023 3D Printing Predictions: Additive Manufacturing for Series Production of Metal Parts
As the 3D printing industry matures, we can see a stream of very positive developments unfold. Away from the hype and hubris, there has been true progress in getting parts…
3D Printing Financials: Velo3D Misses Earnings and Adjusts Full Year Guidance
Velo3D (NYSE: VLD) announced results for its third quarter and trimmed its full-year 2022 revenue guidance to between $75 million and $80 million compared to its previous guidance of $89…
Velo3D CEO Benny Buller Announced as Opening Keynote for AMS 2023
In less than four months, our 6th annual Additive Manufacturing Strategies (AMS) summit for 3D printing stakeholders returns to New York City. From February 7-9, 2023, 3DPrint.com and SmarTech Analysis…
Velo3D CEO Benny Buller on Impressive Q2 Earnings – AMS Focus
Though Additive Manufacturing Strategies (February 7-9, 2023) takes place just once a year, the verticals showcased at New York’s only 3D printing event are constantly evolving. AMS Focus highlights these…
On the Ground at Velo3D’s New European Tech Center for Metal 3D Printing
Today, Velo3D (NYSE: VLD) opened a European Technical Center in Augsburg, Germany. The U.S. company has crossed over to Europe, where it can better educate and showcase its capabilities to…
3D Printing Financials: Record Revenue & Heightened Losses for VELO3D’s Q1 2022
Velo3D (NYSE: VLD) announced mixed first-quarter earnings results on May 10, 2022, leading to a 5.2% decrease in the stock price in after-hours trading and a 12.4% drop when the…
VELO3D Goes Public: We Speak to CEO Benny Buller
VELO3D (NYSE: VLD) went public today with the company listing on the New York Stock Exchange (NYSE) under the ticker symbol “VLD”. The company merged with JAWS Spitfire Acquisition Corporation…
AM Investment Strategies Profile: VELO3D
Next week, RAPID + TCT 2021 kicks off in Chicago, and as a pre-cursor to the event, the virtual SmarTech – Stifel AM Investment Strategies 2021 summit is being held…
Benny Buller on VELO3D’s SPACtacular Rise in Metal 3D Printing
2021 has already been a SPACtacular year for the 3D printing industry, with several companies already announcing mergers with special purpose acquisition companies (SPACs). This includes Markforged, Rocket Lab, and…
3DPOD Episode 53: Benny Buller, VELO3D Founder and CEO
Today, Max and I got to chat to Benny Buller, CEO of VELO3D. His company is shaking up the metal powder bed fusion market and Benny lets us in on…
