advanced manufacturing

On-Demand Manufacturing Platform Fictiv Launches 3D Visualization Tool for Injection Molding

As the Biden administration’s recently released National Strategy for Advanced Manufacturing signals, the scale-up of 3D printing will be critical not just for the sector itself, but for the entire…

Featured

The AM Drilldown: 4 Ps to Watch for in Q4

The end of the fiscal year has officially started, and the global economy’s trajectories seem poised to continue in 2023 on much the same volatile track they’ve been on for…

MMX 2022: Ask America Makes Anything about 3D Printing

America Makes is the United States’ leading public-private partnership for additive manufacturing (AM) technology and education, working to not only accelerate adoption of the technology in the country, but also to…

Featured

MMX 2022: Celebrating 10 Years of America Makes & 3D Printing in Ohio

America Makes is the United States’ leading public-private partnership for additive manufacturing (AM) technology and education, working to not only accelerate adoption of the technology in the country, but also…

3D Printing News Briefs, December 22, 2021: Business, Software, Rhinoplasty, & More

We’re starting off with two acquisitions in today’s 3D Printing News Briefs, and then on to a new Amazon e-commerce store for polypropylene filaments. Then we’ll discuss software, print orientation,…

GE and University of Sydney Launch Research Hub to Drive 3D Printing Innovation

In 2020, the University of Sydney (USYD) and GE subsidiary GE Additive announced the launch of a high-tech manufacturing hub on campus to establish capabilities and training in metal additive…

PrinterPrezz Acquires Greg Morris’s Vertex Manufacturing

Next-generation medical device manufacturer PrinterPrezz acquired Vertex Manufacturing, a Cincinnati-based advanced manufacturer and full-service machining shop, for an undisclosed amount. This marks PrinterPrezz’s first acquisition, as the startup has been…

3D Printing Webinar and Event Roundup: May 16, 2021

Even as we get closer to the official start of summer, that doesn’t mean the amount of webinars, virtual events, and live events are going down; in fact, the opposite…

TÜV SÜD Becomes World Economic Forum Partner, Will Focus on 3D Printing

German testing and certification firm TÜV SÜD will become a World Economic Forum partner engaging in platforms specialized in advanced manufacturing and production. The business will focus on four core…

3D Control Systems Launches AI-Powered 3D Printing Workflow Platform ZAP

Today, California-based 3D Control Systems, which is the parent company of 3DPrinterOS, is announcing the launch of ZAP, its new AI-powered automated software platform for the advanced manufacturing industry. The…

Michigan Rep. Haley Stevens Discusses Directs Congressional Efforts to 3D Printing Jobs

The Additive Manufacturing Coalition hosted a live forum with Congresswoman Haley Stevens to discuss what the industry can expect from the 117th Congress, which convened for the first time in…

3D Printing News Briefs, October 18, 2020: Sigma Labs & INS.OS, Raise3D, PrinterPrezz

In this week’s 3D Printing News Briefs, we’re talking about a strategic alliance, a software launch, and FDA clearance. Sigma Labs and IN4.OS are teaming up for Factories of the…

3D Printing News Briefs, September 5, 2020

In today’s 3D Printing News Briefs, the former CEO of Carbon has joined the faculty of a prestigious university. Moving on, a 3D printing whiz and Tel Aviv professor has…

3D Printing Webinar and Virtual Event Roundup, August 23, 2020

We’ve got a lot of online events and webinars to tell you about in today’s roundup, with topics ranging from safety and sustainability to AM training and industrial 3D printing….

3D Printing News Briefs, June 3, 2020: Tethon 3D, SolidLine, Scottish Enterprise, Phillips Corporation

We’re telling you about a new material in today’s 3D Printing News Briefs, followed by some business news and a military partnership. Tethon 3D is launching a new material, while…

3DPrinterOS Partnering with MilleBot to Containerize Large-Scale 3D Printing

Thanks to a newly announced partnership between Orlando 3D printing startup MilleBot and 3DPrinterOS, a privately held Silicon Valley company that developed an operating system for advanced digital manufacturing, 3D…

MetalMaker 3D Launching Rapid Prototyping Service for Metal 3D Printed Parts On Demand

Tomorrow, North America’s largest metal forming, fabricating, welding, and finishing event, FABTECH, will begin at the Georgia World Congress Center in Atlanta. Many industry announcements will be made at the trade show,…

Sponsored

Six Shows In One: UBM’s Advanced Manufacturing New York Event Covers 3D Printing, Robotics, Smart Manufacturing, and More

Big events are a good way to bring everyone in the manufacturing industry together to discuss common themes, like design and 3D printing. Global B2B event producer UBM Advanced Manufacturing Expos…

LLNL Provides Update on Collaborative Research into Why Flaws Occur in Metal 3D Printing Processes

While the potential that metal 3D printing has to truly shake things up in the manufacturing world is great, it’s not without its faults. Many facilities are putting forth significant…

Sponsored

3D Printing and Other Advanced Technologies on Display at Smart Manufacturing Experience 2018

From April 30th through May 2nd, SME and AMT – the Association for Manufacturing Technology – will be presenting what is shaping up to be the leading smart manufacturing event…

MakerBot and KUKA: 3D Printing and Robotics Lead the Way for New Future of Manufacturing

Over the past few years, we have followed robotics manufacturer KUKA in several different and spectacular 3D printing projects, including the part their robots played in creating a massive concrete…

3D Printing in Automotive Applications: Tooling, Spare Parts, Race Car Components

3D printing can be used on the automotive assembly line to make car parts, components, and prototypes that are more lightweight and have faster turnaround times, as well as production…

Sponsored

SME Announces Schedule for 2018 RAPID + TCT Conference: Medical and Metal 3D Printing Get Top Billing

SME is a nonprofit organization dedicated to supporting the manufacturing industry. One of the many ways SME works to fulfill its goal is by hosting manufacturing industry events, giving people in…

3D Printing News Briefs: January 19, 2018

We’re all business today in 3D Printing News Briefs, covering stories about everything from investments, grants, and executives to awards and new machines. SCRA announced an investment in 3D prosthetics…