3d printing business news

What Does BASF’s Investment in Materialise Mean for the 3D Printing Industry?

What Does BASF’s Investment in Materialise Mean for the 3D Printing Industry?

Earlier on today BASF invested $25 million into Materialise. We speculated that perhaps BASF wanted to conquer the eyewear market because the potential of this market is so vast. We won’t sure what this investment means for both firms for many years. What is sure is that this partnership will have far-reaching consequences for 3D […]

Earlier on today BASF invested $25 million into Materialise. We speculated that perhaps BASF wanted to conquer the eyewear market because the potential of this market is so vast. We won’t sure what this investment means for both firms for many years. What is...
3D Printing News Briefs: July 17, 2018

3D Printing News Briefs: July 17, 2018

In Today’s 3D Printing News Briefs, we’re covering a lot of business and a little medical news. AMFG is partnering with a top UK bearings manufacturer to help automate its digital manufacturing workflows, while Segula Technologies has begun an industrial 3D printing partnership with digital manufacturing company Multistation. Techniplas has completed a deployment of Sharebot […]

In Today’s 3D Printing News Briefs, we’re covering a lot of business and a little medical news. AMFG is partnering with a top UK bearings manufacturer to help automate its digital manufacturing workflows, while Segula Technologies has begun an industrial...
GE Additive Partnering Up with Honda and Triumph Group for 3D Printing Acceleration

GE Additive Partnering Up with Honda and Triumph Group for 3D Printing Acceleration

GE Additive, which is attending the Farnborough International Airshow this week, has been busily dropping announcements from the trade fair, the latest of which is centered around its AddWorks additive consulting service provider. GE Additive and AddWorks were chosen by the Honda R&D Co., Ltd, Aircraft Engine R&D Center in Japan to help increase the development […]

GE Additive, which is attending the Farnborough International Airshow this week, has been busily dropping announcements from the trade fair, the latest of which is centered around its AddWorks additive consulting service provider. GE Additive and AddWorks were chosen...
GE Additive Announces New 3D Printing Agreement with Eaton, Relocates Gas Atomization Materials Equipment to AP&C

GE Additive Announces New 3D Printing Agreement with Eaton, Relocates Gas Atomization Materials Equipment to AP&C

Since announcing an increased focus on 3D printing last spring, GE Additive has been busy making good on its announcement, acquiring and partnering with other companies in the industry, introducing new 3D printers left and right, and opening a new Customer Experience Center. Now, the 3D printing-centric business of global giant GE is releasing a slew […]

Since announcing an increased focus on 3D printing last spring, GE Additive has been busy making good on its announcement, acquiring and partnering with other companies in the industry, introducing new 3D printers left and right, and opening a new Customer Experience...
ZiggZagg Saves Money and Grows 3D Printing Client Base With DigiFabster’s SaaS Platform

ZiggZagg Saves Money and Grows 3D Printing Client Base With DigiFabster’s SaaS Platform

3D printing software and services provider DigiFabster, established in 2015, uses its software-as-a-service (SaaS) platform to help companies automate and streamline certain business processes in a single step. Recently, Belgium-based 3D printing service bureau ZiggZagg used DigiFabster’s platform to greatly improve its productivity and growth – the company is currently experiencing a 25% month-over-month growth rate. ZiggZagg […]

3D printing software and services provider DigiFabster, established in 2015, uses its software-as-a-service (SaaS) platform to help companies automate and streamline certain business processes in a single step. Recently, Belgium-based 3D printing service bureau...
Xaar and Stratasys Invest Together in New Xaar HSS 3D Printing Company

Xaar and Stratasys Invest Together in New Xaar HSS 3D Printing Company

Digital inkjet technology developer Xaar plc, which is headquartered in the UK and also manufactures piezoelectric, drop-on-demand industrial printheads, first entered the 3D printing industry back in 2014, when it helped develop the high speed sintering (HSS) FACTUM 3D printer. In 2016, having fully embraced the 3D printing sector, the company announced that it would be […]

Digital inkjet technology developer Xaar plc, which is headquartered in the UK and also manufactures piezoelectric, drop-on-demand industrial printheads, first entered the 3D printing industry back in 2014, when it helped develop the high speed sintering (HSS) FACTUM...
Oerlikon and Lufthansa Technik to Create Repeatable 3D Printing Processes and Standards in Aircraft MRO Industry

Oerlikon and Lufthansa Technik to Create Repeatable 3D Printing Processes and Standards in Aircraft MRO Industry

While standards and regulations in any type of industry are necessary, it’s of the utmost importance to properly set them up in the aerospace field, especially when it comes to 3D printed parts and components – people’s lives are actually at stake. As the aerospace industry continues to increase its rate of adoption for additive […]

While standards and regulations in any type of industry are necessary, it’s of the utmost importance to properly set them up in the aerospace field, especially when it comes to 3D printed parts and components – people’s lives are actually at stake....
3D Printing News Briefs: July 10, 2018

3D Printing News Briefs: July 10, 2018

We’re starting things off with a little business in today’s 3D Printing News Briefs, then moving on to news from the medical and construction industries, and finishing up with a few fun stories to make you smile. First up, Jeff Immelt, the former CEO of General Electric, has joined the board at Desktop Metal, and […]

We’re starting things off with a little business in today’s 3D Printing News Briefs, then moving on to news from the medical and construction industries, and finishing up with a few fun stories to make you smile. First up, Jeff Immelt, the former CEO of...
Nano Dimension and Mayku Announce New Strategic and Distribution 3D Printing Partnerships

Nano Dimension and Mayku Announce New Strategic and Distribution 3D Printing Partnerships

Israeli additive electronics provider Nano Dimension announced in April that it would be expanding its coverage in the Asia Pacific (APAC) region, and today has made good on that announcement. The award-winning company has officially entered the Chinese market now, thanks to its strategic partnership with top 3D printer distributor the AURORA Group. The AURORA Group is the […]

Israeli additive electronics provider Nano Dimension announced in April that it would be expanding its coverage in the Asia Pacific (APAC) region, and today has made good on that announcement. The award-winning company has officially entered the Chinese market now,...
3D Printing News Briefs: June 29, 2018

3D Printing News Briefs: June 29, 2018

In today’s 3D Printing News Briefs (the last one this month, how is the summer going by so quickly?!), a few companies are announcing special honors and recognitions, and then we’re sharing stories stories about some interesting new 3D printing projects, and finally wrapping things up before the weekend with some business news. Renishaw’s Director […]

In today’s 3D Printing News Briefs (the last one this month, how is the summer going by so quickly?!), a few companies are announcing special honors and recognitions, and then we’re sharing stories stories about some interesting new 3D printing projects,...
CTC Will Leverage Sciaky’s EBAM Metal 3D Printing Technology in New Strategic Partnership

CTC Will Leverage Sciaky’s EBAM Metal 3D Printing Technology in New Strategic Partnership

In 2009, Sciaky, Inc., a subsidiary of Phillips Service Industries, Inc. (PSI), first launched its innovative Electronic Beam Additive Manufacturing (EBAM) process for large-scale, high quality metal parts. While at first this 3D printing process was only open to companies like Lockheed Martin, DARPA, Boeing, and others that needed help in making prototype and production parts up to […]

In 2009, Sciaky, Inc., a subsidiary of Phillips Service Industries, Inc. (PSI), first launched its innovative Electronic Beam Additive Manufacturing (EBAM) process for large-scale, high quality metal parts. While at first this 3D printing process was only open...
Graphmatec Partnering with Materials Developer Add North 3D to Develop Conductive 3D Printing Filaments

Graphmatec Partnering with Materials Developer Add North 3D to Develop Conductive 3D Printing Filaments

Last summer, materials scientist Dr. Mamoun Taher, a researcher in the Department of Chemistry at Uppsala University in Sweden, worked with serial entrepreneur Björn Lindh to found a startup company, of which Taher is the CEO, called Graphmatech. Not only is the startup part of top European business accelerator the InnoEnergy Highway, which specializes in sustainable energy, but it also belongs to SynerLeap, […]

Last summer, materials scientist Dr. Mamoun Taher, a researcher in the Department of Chemistry at Uppsala University in Sweden, worked with serial entrepreneur Björn Lindh to found a startup company, of which Taher is the CEO, called Graphmatech. Not only is the...
3D Systems Looks to Increase 3D Printer Efficiency with Aquant’s AI Platform

3D Systems Looks to Increase 3D Printer Efficiency with Aquant’s AI Platform

For the last two years, 3D printing industry giant 3D Systems has been looking into product launches in hardware, materials, and workflow, in order to create more opportunities for additional applications. 3D Systems President and CEO Vyomesh Joshi (VJ) mentioned this strategy again at RAPID + TCT in Texas last month, and highlighted a few […]

For the last two years, 3D printing industry giant 3D Systems has been looking into product launches in hardware, materials, and workflow, in order to create more opportunities for additional applications. 3D Systems President and CEO Vyomesh Joshi (VJ) mentioned this...
PostNord Continues Partnership with 3YOURMIND with New On-Demand 3D Printing Portal

PostNord Continues Partnership with 3YOURMIND with New On-Demand 3D Printing Portal

In 2017, PostNord, one of the top Nordic suppliers of communication and logistics solutions, decided that adding 3D printing to its service offering was a necessary step. 3D technologies could help the company, which boasts a strong distribution network, address the changing needs of its customers by combining on-demand 3D printing capabilities with the 2D printing services […]

In 2017, PostNord, one of the top Nordic suppliers of communication and logistics solutions, decided that adding 3D printing to its service offering was a necessary step. 3D technologies could help the company, which boasts a strong distribution network, address the...
3D Printing News Briefs: June 8, 2018

3D Printing News Briefs: June 8, 2018

It’s all business for today’s 3D Printing News Briefs, starting with an investment, a partnership, and a new facility. Lockheed Martin has invested $5 million in a Canadian materials science company, while ZVerse has partnered up with PlanGrid to integrate its Design On-Demand platform, and Nanogrande has moved into a new, larger facility. Sculpteo has […]

It’s all business for today’s 3D Printing News Briefs, starting with an investment, a partnership, and a new facility. Lockheed Martin has invested $5 million in a Canadian materials science company, while ZVerse has partnered up with PlanGrid to integrate...
Materialise 3D Printing Technology to Power CAMWorks Software for New Hybrid Manufacturing Module

Materialise 3D Printing Technology to Power CAMWorks Software for New Hybrid Manufacturing Module

This week, 3D printing industry heavyweight Materialise announced a new partnership with global IT services company HCL Technologies, which helps global enterprises re-imagine and transform their businesses through digital technology. Materialise combines the industry’s largest group of software developers with one of the biggest 3D printing facilities in the world, and is partnering with HCL to create […]

This week, 3D printing industry heavyweight Materialise announced a new partnership with global IT services company HCL Technologies, which helps global enterprises re-imagine and transform their businesses through digital technology. Materialise combines the...
HP and Siemens PLM Expand Partnership to Provide More 3D Printing and Design Opportunities

HP and Siemens PLM Expand Partnership to Provide More 3D Printing and Design Opportunities

Among its many partners, HP counts Siemens as one of its primary collaborators in the ongoing mission to transform 3D printing to a production technology. The company relied on Siemens’ software to develop and scale its innovative Multi Jet Fusion technology, and Siemens NX AM for HP Multi Jet Fusion, an extension of Siemens’ end-to-end design-to-production software […]

Among its many partners, HP counts Siemens as one of its primary collaborators in the ongoing mission to transform 3D printing to a production technology. The company relied on Siemens’ software to develop and scale its innovative Multi Jet Fusion technology,...
3D Printing News Briefs: May 29, 2018

3D Printing News Briefs: May 29, 2018

We’re all business today in 3D Printing News Briefs, as we see companies introducing new products and starting new partnerships. Sharebot and Tractus3D both have new 3D printers, and Omegasonics is bringing its ultrasonic cleaning units to IMTS 2018. Perstorp and 3D4Makers have signed a joint venture agreement, while BIOLIFE4D announced that it’s now a […]

We’re all business today in 3D Printing News Briefs, as we see companies introducing new products and starting new partnerships. Sharebot and Tractus3D both have new 3D printers, and Omegasonics is bringing its ultrasonic cleaning units to IMTS 2018. Perstorp...
3D Printing News Briefs: May 25, 2018

3D Printing News Briefs: May 25, 2018

As you head into the weekend, we’re bringing you all of the latest business, materials, and software news in today’s 3D Printing News Briefs. Xaar announced a new executive, Wipro 3D was awarded an important quality certification, and Stratasys and Polymaker both have new partnerships. German RepRap is expanding its materials portfolio, while CERN has […]

As you head into the weekend, we’re bringing you all of the latest business, materials, and software news in today’s 3D Printing News Briefs. Xaar announced a new executive, Wipro 3D was awarded an important quality certification, and Stratasys and...
3D Printing News Briefs: May 22, 2018

3D Printing News Briefs: May 22, 2018

We’ve got both business and medical news to cover in today’s 3D Printing News Briefs. PostProcess is expanding its channel partner coverage across North America, while Sciaky has received an order for several of its EBAM 3D printers, and MTU Aero Engines is increasing its efforts in the additive manufacturing field. Orthopedic company OTN has […]

We’ve got both business and medical news to cover in today’s 3D Printing News Briefs. PostProcess is expanding its channel partner coverage across North America, while Sciaky has received an order for several of its EBAM 3D printers, and MTU Aero Engines...
3D Printing News Briefs: May 18, 2018

3D Printing News Briefs: May 18, 2018

We’re starting with some exciting news in today’s 3D Printing News Briefs, then moving right along into business, events, and research. In Melbourne this week, Titomic has introduced its new metal 3D printer, said to be the largest and fastest in the world. Nano Dimension and voxeljet have released their financials for Q1 2018, a […]

We’re starting with some exciting news in today’s 3D Printing News Briefs, then moving right along into business, events, and research. In Melbourne this week, Titomic has introduced its new metal 3D printer, said to be the largest and fastest in the...
3D Printing News Briefs: May 15, 2018

3D Printing News Briefs: May 15, 2018

There are several new launches to cover in today’s 3D Printing News Briefs, starting with a new sustainable 3D printing steel powder project. Jabil has begun its digital future initiative, and ANSYS released its latest software version, which has a digital twin feature. WASP has a new clay line, and German RepRap has added PEKK […]

There are several new launches to cover in today’s 3D Printing News Briefs, starting with a new sustainable 3D printing steel powder project. Jabil has begun its digital future initiative, and ANSYS released its latest software version, which has a digital twin...
Canadian Government Invests in Adaptiiv and Its 3D Printed, Patient-Specific Boluses

Canadian Government Invests in Adaptiiv and Its 3D Printed, Patient-Specific Boluses

To make sure that cancer patients are getting the full strength of their radiation treatment directed exactly where it is most needed, a device called a bolus can be used to “shape” the treatment to the specifics of the person’s body. These devices are traditionally made out of a rubbery material, but can now be […]

To make sure that cancer patients are getting the full strength of their radiation treatment directed exactly where it is most needed, a device called a bolus can be used to “shape” the treatment to the specifics of the person’s body. These devices are...
Titomic Brings Kinetic Fusion 3D Printing to Marine Sector with New Fincantieri Agreement

Titomic Brings Kinetic Fusion 3D Printing to Marine Sector with New Fincantieri Agreement

Over the last several months, Australia-based metal 3D printing company Titomic has been keeping busy, announcing new executives and collaborations with both a mining and oil & gas engineering services company and Callaway Golf Company. Now, Titomic has entered into a Memorandum of Understanding (MoU) with the Australian division of Italy-based Fincantieri, one of the world’s largest […]

Over the last several months, Australia-based metal 3D printing company Titomic has been keeping busy, announcing new executives and collaborations with both a mining and oil & gas engineering services company and Callaway Golf Company. Now, Titomic has entered...
3D Printing News Briefs: May 11, 2018

3D Printing News Briefs: May 11, 2018

We’re bringing you the business first in today’s 3D Printing News Briefs, and then moving on to a car update and metal 3D printing news. The ExOne company has released its Q1 2018 financial results, while the South Korean government is investing in 3D printing and Fictiv announces the results of its Series B funding […]

We’re bringing you the business first in today’s 3D Printing News Briefs, and then moving on to a car update and metal 3D printing news. The ExOne company has released its Q1 2018 financial results, while the South Korean government is investing in 3D...
Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our 3DPrint.com.

You have Successfully Subscribed!

Newsletter Signup Form

Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
  • This field is for validation purposes and should be left unchanged.