U.S. Department of Energy (DOE)
3D Printing News Briefs, May 25, 2024: 3D Printed Medical Models, Sensors, Engines, & More
We’re starting with research in today’s 3D Printing News Briefs, first about filament diameter-adjustable 3D printing and then about 3D printed sensors. Then, we’re moving on to personalized 3D printed…
US Department of Energy Awards 6K Energy $50M for Construction of Battery Material Plant
6K Energy, the sibling company of 6K Additive, has been awarded $50 million from the US Department of Energy’s (DOE’s) Office of Manufacturing and Energy Supply Chains. The funds will…
Biden Admin Announces Over $6 Billion in Funding for Battery and Chip Advanced Manufacturing in November
In a development that has become routine for the Biden administration, the White House announced a total of more than $6 billion in new funding opportunities for advanced manufacturing applications…
voxeljet’s Stock Revival: $14.9M GE Research Deal Propels Shares
Large-scale 3D printer maker voxeljet (Nasdaq: VJET) has been navigating troubled waters lately, marked by a looming cash burn earlier this year and a decision to review potential strategic changes….
3D Printing Takes a Giant Leap: NASA to Test 3D Printed Lunar Rover Wheel Prototype
Researchers at the Department of Energy (DOE) ‘s Oak Ridge National Laboratory (ORNL) have joined forces with NASA to 3D print a prototype lunar rover wheel, further demonstrating the transformative…
GE is the Big Winner in DoE’s $72M Advanced Manufacturing Investment
Last week, the US Department of Energy (DOE) announced $72 million in funding for domestic wind energy and hydropower projects, including over $40 million awarded to projects for advanced manufacturing,…
3D Printing News Briefs, September 23, 2023: Research Awards, Dental Veneers, Gaming, & More
In 3D Printing News Briefs, technologies developed by ORNL researchers won six R&D research awards, Rolls-Royce delivered its first of four Coach-built Droptail models with 3D printed elements, and Boston…
Manufacturing USA Institute IACMI Gets DoE Funding Renewal for Advanced Composites Manufacturing
The Institute for Advanced Composites Manufacturing Innovation (IACMI) announced that the US Department of Energy (DOE) has renewed the institution’s funding for R&D into the manufacturing of advanced composite materials….
Biden Admin Announces $72M in Funding for Workforce Training in Clean Energy Advanced Manufacturing
Amid President Biden’s Investing in America campaign, a cross-country tour in which the commander-in-chief is touting his administration’s extensive support for reshoring American manufacturing, the US Department of Energy (DOE)…
3D Printing News Briefs, March 22, 2023: Carbon Sequestration, 3D Printed Bird Drones, & More
In 3D Printing News Briefs today, Meltio is expanding its worldwide partner network, and 3D Systems introduced its VSP Connect portal. Oregon State University and Sandia National Laboratories received a…
DOE Announces $30M Funding Opportunity for 3D Printed Wind Turbines
The US Department of Energy (DOE) recently announced a $30 million funding opportunity for projects involving wind turbines produced with additive manufacturing (AM). Submissions of project proposals are due March…
Gefertec’s arc605 Metal 3D Printer Installed with First U.S. University Client
Thanks to funding from the Department of Energy and the United States Army, the University of Pittsburgh is proud to own the first Gefertec arc605 3D printer at any university…
Ceramic Electronics 3D Printing Receives $2.7M from Department of Energy
Earlier this year, the US Department of Energy (DOE) said it would grant $175 million to 68 R&D projects to create disruptive technologies that can strengthen the nation’s advanced energy…
Coal-Based 3D Printing Materials Funded by $7M in U.S. DoE Grants
Rather than abandon them altogether, U.S. Department of Energy’s (DOE) and its Office of Fossil Energy and Carbon Management (FECM) continue to support fossil fuels. In this case, however, they’re…
3D Printing News Briefs, June 12, 2021: BAE Systems, Mechano, QuesTek, University of Virginia, University of Stuttgart, PRES-X & GPAINNOVA
We’re all about material news and research in this week’s 3D Printing News Briefs, and finishing up with a bit of business. First up, BAE Systems is using large-scale 3D…
3D Printing News Briefs, May 26, 2021: ASTM, Teton Simulation, QuesTek, KBM Advanced Materials, GE Aviation & GE Additive
We’re covering some business in today’s 3D Printing News Briefs, as Teton Simulation appointed a new CEO, and ASTM International awarded its William T. Cavanaugh Memorial Award. QuesTek has received…
UMaine 3D Printing Massive Wind Turbine Molds
As global society shifts to renewable energy, there will likely be efforts to make the production of wind turbines faster and more efficient. Fortunately for those involved, 3D printing will…
U.S. Energy Department Awards QuesTek $1.2M for Ultra-high Temperature 3D Printing Metals
The U.S. Department of Energy (DOE)’s Advanced Research Projects Agency-Energy (ARPA-E) awarded a $1.2 million grant to high-performance materials developer QuesTek Innovations. The funds will be used to design and…