digital twin

US Army Contracts 3YOURMIND & Phillips Corp. for 3D Printed Tank Parts Identification

The US Army Combat Capabilities Development Command (DEVCOM) Ground Vehicle Systems Center (GVSC) has awarded 3YOURMIND and Phillips Corporation Federal Division a contract to develop part identification solutions for tanks….

Featured

Half of Hyundai’s Singapore Innovation Center Is Run by Robots

Hyundai (KRX: 005380) has just inaugurated the Hyundai Motor Group Innovation Center Singapore (HMGICS), a groundbreaking facility set to transform the landscape of electric vehicle (EV) production. Equipped with AI,…

Featured

All-Female Vehicle Builds and International Trade Anchor Women in 3D Printing Conference in Dreams and Reality

Women in 3D Printing (Wi3DP) hosted its third annual Technology, Industry, People, Economics (TIPE) Conference and, from an attendee’s perspective, it seemed to go off without a hitch. We should…

Sponsored

Digitalization and Additive Manufacturing: Leveraging the Real and Digital Worlds

Additive Manufacturing, or industrial 3D printing, has evolved from prototyping with basic materials and equipment to producing low tolerance components with limited use to additive manufacturing as we know it…

3D Printing News Unpeeled: LocLab and Hexagon, SpaceTech and Glowscape

eSoutheast University (SEU) Nanjing and ETH Zurich have made Glowscape this is a large format Kuka robot 3D print using Natureworks Ingeoe PLA pellets. The interactive lit piece uses its translucency…

3D Printing News Briefs, October 26, 2022: Metal Alloys, Construction, & More

In today’s 3D Printing News Briefs, we’re starting with research out of the Fraunhofer Institute for Manufacturing Engineering and Automation on 3D printing sensors in a single operation, and then…

Desktop Metal 3D Printing Gets Digital Overhaul from Siemens

As 3D printing firms weather the economic downturn, industrial giants are able to further ingrain themselves into the additive manufacturing (AM) industry. The latest example of this is a new…

3D Printing News Briefs, December 9, 2021: Business, Materials, & Research

A partnership between Prima Additive and Materialise is first up in today’s 3D Printing News Briefs, followed by news on a headquarters expansion from PrinterPrezz. Service bureaus in Japan are…

PrintParts and 3D Control Systems Partner to Integrate End-to-End Traceability in AM Industry

A development partnership agreement has been announced between 3D Control Systems, a San Francisco-based software company specializing in workflow management platforms for additive manufacturing, and PrintParts Inc., an AM technologies…

Replicating a Masterpiece: Michelangelo’s David Gets 3D Printed Twin for Expo 2020

A life-size, 3D printed replica of Michelangelo Buonarroti’s “David” was unveiled in early May 2021 as the centerpiece of the Italy Pavilion at the Expo 2020 world fair hosted by…

3D Printing Webinar and Event Roundup: May 9, 2021

We’ve got another full week of AM industry webinars and events to tell you about, so let’s not waste any time on the introductions—jump right in! SPE’s ANTEC 2021, with…

Authentise Integrating nebumind’s Digital Twin Visualization into AMES 3D Printing Software

Authentise, which offers data-driven process automation software and workflow tools for AM, announced that it is partnering with German software startup nebumind for the purposes of integrating the digital twin…

3D Printing Webinar and Virtual Event Roundup, November 9, 2020

With the exception of just a few online offerings, most of this week’s roundup is dedicated to Formnext Connect, taking place virtually this week from November 10-12. Read on to…

Siemens and Sintavia Partner for Industrial 3D Printing Software Solutions

Siemens and Sintavia are reimagining end-to-end additive manufacturing (AM) to deliver a more viable solution to the additive process. In order to accelerate digital automation for industrial AM, the multinational…

Featured

3DEXPERIENCE: A Virtual Journey, Part 1

Due to the ongoing COVID-19 crisis, this year’s 3DEXPERIENCE Forum by Dassault Systèmes had to be re-imagined as a virtual event, just like so many other conferences. At 1 pm…

Featured

MX3D Uses Robot Arm to Make 3D Printed Robot Arm, Installs It on Robot

MX3D’s steel bridges are an inspiring sight to see, but, even if bridges are what the Dutch firm is known for, they are not the only thing the firm is…

Dassault Systèmes: Revenue Report, New COO, Increase Focus on Virtual Twin

Dassault Systèmes, the 3DEXPERIENCE company, is starting the weekend with a little business, by making several announcements. First, the company revealed its IFRS unaudited financial results for the 4th quarter…

Generative Design, Digital Twin, WAAM 3D Printing Used to Optimize Industrial Robot Arm

3D printing specialist MX3D has been working on a metal AM technology to create large items, such as bicycles and bridges, using robots. Now, the Dutch startup has partnered up…

3DEXPERIENCE Modeling & Simulation Conference: Finn Mast Project & Guest Speaker Dr. Byron Pipes

Recently, Dassault Systèmes, the 3DEXPERIENCE software company, held its 3DEXPERIENCE Modeling & Simulation Conference. I was lucky enough to be invited to attend the event in Novi, Michigan, and the first…

3DEXPERIENCE Modeling & Simulation Conference: Keynote by Skunk Works & Executive Roundtable

Last week, Dassault Systèmes, the 3DEXPERIENCE software company, held the 3DEXPERIENCE Modeling & Simulation Conference in Michigan. I was invited to attend the event, which was held from September 18-19…

Better than a Digital Twin, The Need for the Digital Triplet

The Digital Twin is a concept that is being established by the Enterprise CAD software crowd as well as people working in industrial automation. Heard among many a chin-chin with…