seed funding
€2M Drives 3D Printing Analysis Software from European Startup
Trailblazing French software company Cognitive Design Systems (CDS) has successfully secured €2 million ($2.2 million) in its first seed funding round, marking a pivotal moment in its mission to revolutionize…
3D Printing News Briefs, November 25, 2023: Housing, Seed Funding, & More
We’re starting with additive construction news in this Thanksgiving weekend edition of 3D Printing News Briefs, and then moving on to seed funding and a Memorandum of Understanding. Finally, we’ll…
Swiss Startup Aims to Create Automated Factories with Multi-purpose 3D Printing Bots
SAEKI, a Switzerland-based startup, has announced its launch with a $2.3M seed funding round, focusing on a significant challenge in the architecture, engineering, and construction (AEC) industry—the slow and costly…
Geometric 3D Printing Specialist Metafold Lands $1.78M in Funding
Metafold, a newcomer in Design for Additive Manufacturing (DfAM) software, has announced a successful seed funding round of $1.78 million (CAD $2.4 million). The Canadian startup, established in 2020, is…
3D Printing News Briefs, July 1st, 2023: Digital Fashion, 3D Printed Boulder Replica, & More
In today’s 3D Printing News Briefs, we’re getting down to business first, as Albert Invent has raised $7.5 million in seed funding, and Lithoz delivered its CeraFab S65 printer to…
3D Printing News Unpeeled: Marine Gearboxes, 3D Printed Motors and $1.7 Million in Seed Funding
UK based Equipmake just released their Ampere-220 e-axle system. The system, which is meant for high performance electric cars, was similar to one released on the Ariel HIPERCAR. It has…
3D Printed Compostable Clay Cup Startup Bags $6.5M in Seed Round
Berlin-based startup GaeaStar has found a solution to single-use plastics. Using a “drink to dust” technology, the business 3D prints clay containers that don’t require recycling. Inspired by 5,000-year-old Indian…
3D Printing News Briefs, March 4, 2023: Rebranding, Superalloys, & More
We’re starting off with business in today’s 3D Printing News Briefs, as 3dpbm rebrands as VoxelMatters, Xaba closes a seed funding round, and CORE Industrial Partners, and its portfolio company…
Startup to 3D Print Data Centers Using $7M in Funding
EdgeCloudLink (ECL), a Silicon Valley-based startup, has received $7 million in seed round funding from Hyperwise Ventures, based in Tel Aviv, and Molex Ventures, headquartered in Chicago, to drive its mission…
Aussie 3D Printed Electronics Startup Snags $2.5M
Australian printed electronics startup Syenta has raised AU$ 3.7 million ($2.5 million) in a seed funding round to accelerate the production of its multi-material 3D printers that allow customers to…
$1.3M Funds 100X Speed Volumetric 3D Printing from Vitro3D
Vitro3D, a spinout of the University of Colorado at Boulder and a part of The Colorado Life Science Incubation Program, has received $1.3M in a seed funding round, which will…
Simplifyber’s 3D Printed Molds Enable Sustainable, Biodegradable Fashion
While fashion can be really fun, it’s also a very wasteful industry. As Kornit Digital CEO Ronen Samuel said at the company’s Fashion Week in Tel Aviv this year, 28…
Next-gen Biomaterials Startup Raises $4.1M
It’s turning out to be a big year for biomaterials in fashionwear, especially now that a handful of startups are building a new class of materials and getting plenty of…
3D Printing News Briefs, May 14, 2022: Earphones, Acquisitions, & More
Kicking off today’s 3D Printing News Briefs is a story from Campfire Audio, which is using the technology to make its new Supermoon earphones. Bharat Fritz Werner launched what it…
Bioprinting Startup Satellite Bio Exits Stealth with Ex-Novartis Exec as CEO
After years in the making, biotech research firm Satellite Bio emerged from stealth mode last week with more than $110 million in financing to pioneer an entirely new category of…
3D Printed Salmon Alternative Plantish Raises $12M to Scale Operations
A month after unveiling its whole cut plant-based salmon fillets, alternative seafood startup Plantish has raised $12.45 million from a seed round and contemplates initial distribution via restaurants. Focused on…
3D Printing Robots Receive €1 Million Boost
Like any good buzzwordy phrase, “Industry 4.0” has its high and low points. An example of a low point, for instance, would be that it’s a subtle way of presenting…
BMW Leads Seed Round for Rubber 3D Printing Startup Rapid Liquid Print
Boston 3D printing company Rapid Liquid Print (RLP) is working to make a new class of 3D printers that can effortlessly build large-scale, high-resolution, soft, and stretchable products using industry-grade…
Concrete 3D Printing and Robots: Diamond Age Receives $8M in Seed Funding
Yet another additive construction startup is joining the increasingly competitive, yet still niche segment. Diamond Age is presenting itself as a “full stack robotics” firm aiming to automate the construction…
CASTOR Closes $3.5M Deal for 3D Printing Software, with Xerox as Investor
Israeli startup CASTOR has secured a $3.5 million seed funding round that will allow the firm to further develop its unique software for identifying parts for 3D printing. In addition…
Brinter Gets $1.2M in Seed Round to Expand Bioprinting
Finnish company Brinter, started in 2019, has just received $1.2 million from Innovestor in order to expand internationally. The company makes modular bioprinters. For example, you can buy a Brinter…
Launcher Raises $11.7M in Funding for 3D Printed Rocket Engines
Amid growing competition in the potentially lucrative small launch vehicle segment, startup Launcher Space has raised $11.7 million in a Series A round of funding led by company CEO and…
3D Printing News Briefs, April 3, 2021: Mirai Foods, Markforged, DyeMansion, Fictiv, Lithoz
With stories ranging from funding for 3D printed meat products and on-demand print finishing services to a new entry-level ceramic 3D printer, we’ve got plenty of news to cover in…
Top 10 3D Printing Software Stories of 2020
This summer, SmarTech Analysis published a new report, titled “Opportunities in Additive Manufacturing Software Markets 2020,” which was its first study of the AM software segment since the inaugural report…
