Relativity Space
Google’s Eric Schmidt Steps in as Relativity Space CEO
See 3/10/25 update at the end of this article. In November 2024, Bloomberg reported that Relativity Space, the Long Beach, California company leveraging additive manufacturing (AM) to produce rockets, was “running low…
Printing Money Episode 26: 3D Printing Markets and Deals with Dayton Horvath, AMT
Welcome to Printing Money Episode 26! For this episode, Danny is joined by Dayton Horvath, Director of Emerging Technology at AMT (and Printing Money alum!). Danny and Dayton had some…
Bloomberg: 3D Printed Rocket Maker Relativity Space Facing Financial Challenges
According to a recently published article in Bloomberg, the Long Beach-based launch company Relativity Space — one of many entities claiming to have the “world’s largest” metal 3D printer —…
The US Air Force: Kings of 3D Printing
The US Air Force is currently one of the largest funding bodies in 3D printing. The amount of work that the Air Force is doing in 3D printing is simply…
Relativity Space Lands $8.7M Air Force Contract for Real-time Flaw Detection in 3D Printing
Relativity Space has landed an $8.7 million contract from the U.S. Air Force Research Laboratory (AFRL) to carry out real-time flaw detection during the 3D printing of large parts. The…
Where Have All AM’s Unicorns Gone?
In the rapidly evolving world of 3D printing, startups valued at over a billion dollars, known as unicorns, once seemed as fantastical as the mythical creatures themselves. While a few…
How My Childhood Fascination with Planes Led to Investing in 3D Printing
My fascination with aerospace started young, and I started studying planes–identifying them in the sky and learning everything I could about how they work. Fast forward to my first week…
2023’s Top 5 Space 3D Printing Stories
In 2024, space exploration will reach new heights with a significant focus on lunar missions. The year will see the highly anticipated Artemis II mission, a milestone in NASA’s Artemis…
Data Shows 2023 Funding for Space 3D Printing Climbs after Slow 2022
In space technology, there is a powerful revival taking place, fueled by innovation, advanced tools, and, most crucially, funding. Entering the second half of 2023, 3DPrint.com is examining the financial…
Relativity Space Co-founder Jordan Noone on What it Takes to Run a VC Firm
What does it take to build a space company from the ground up? Jordan Noone, co-founder and former chief technology officer (CTO) of Relativity Space, has some idea. At 22,…
Relativity Space Pivots: The Terran 1 3D Printed Rocket is Dead. Long Live Terran R
It was the beginning of the 3D printed rocket era. With Terran 1’s ascension to orbit, Relativity Space was finally ready to leave its mark on the coveted space technology…
3D Printing News Unpeeled: Failure to Ignite, Synchrotrons and Connectors
Relativity Space‘s rocket did launch after two failed attempts but the second stage failed to ignite. This is a terrible event in 3D printing. It makes us all look bad and…
3D Printed Rocket from Relativity Space Successfully Lifts Entire AM Industry
On March 22, 2023 at 11:25 p.m. EST, Relativity Space successfully launched the world’s first 3D printed rocket, as a part of a flight test the company named “Good Luck,…
Daring AM: Why Is Relativity Space’s 3D Printed Rocket Still Grounded?
Launching the world’s first 3D printed rocket was not going to be so easy. So, when Relativity Space announced that it’s 85% additively manufactured Terran 1 launch vehicle was ready…
Relativity Space’s 3D Printed Rocket Launch Called Off
Relativity Space’s highly awaited blast of its 3D printed rocket was scrubbed. An issue with the temperature of the propellants on the rocket’s second stage meant the launch was called…
Sheet Metal Startup Hires 3D Printing Vets from Carbon and Relativity Space
Additive manufacturing (AM) can only take you so far, which means there will be plenty of room for other digital production technologies alongside it as automation progresses. Among these complementary…
NASA’s Breakthrough 2022: Artemis, 3D Printed Spacesuits and New Metal Alloys
With a dedicated multitude of followers worldwide and hundreds of thousands of people flocking to the Space Coast to see Artemis I launch on a 26-day mission around the Moon,…
Startup Accelerator: The 10 Most Active VCs in 3D Printing
The startup scene in 3D printing may be small compared to tech at large, but, as additive manufacturing (AM) increases in quality and importance, the number of firms to enter…
Relativity Space’s New Horizontal Stargate 3D Printer Featured 55X Build Volume
Designed to redefine rocket manufacturing, the latest iteration of Relativity Space‘s proprietary additive manufacturing platform is the largest in the world. The company estimates that its Stargate Fourth Generation metal…
Relativity Space’s Gets 150 Acre Expansion at NASA Stennis for 3D Printed Aeon R Engines
A new 150-acre expansion at Relativity Space‘s facilities in NASA Stennis Space Center could give the rocket manufacturer a momentous opportunity to disrupt a multi-billion dollar private space industry. With…
Relativity Space 3D Printed Rocket to Launch First Commercial Mars Lander
As Los Angeles rocket 3D printing startup Relativity Space works towards the first launch of its Terran 1 small-lift launch vehicle, it also revealed that its Terran R fully reusable,…
Raising Capital: 3D Printing CEOs on Getting Funding without Going Public – Part II
In the realm of 3D printing startups, finding the right investors, tracking down capital sources, and generating demand for a product can make or break the future of a business….
OneWeb Satellites to Launch on Relativity Space’s 3D Printed Rocket in $1.2B Contract
Disruptive rocket manufacturer Relativity Space has signed a multi-year agreement with broadband constellation company OneWeb to launch its low Earth orbit (LEO) satellites starting in 2025. As part of the…
Relativity Space Braces for 2022 Demo Launch of 3D Printed Rocket Terran 1
Los Angeles 3D printed rocket company Relativity Space is getting closer to a Summer launch as promised by its VP of Business Development Joshua Brost during this year’s Additive Manufacturing…
