cold spray
DEVCOM Sees SPEE3D 3D Print Transmission Mount for Bradley Fighting Vehicle
SPEE3D participated in a U.S. Army Combat Capabilities Development Command (DEVCOM) Army Research Laboratory (ARL) demonstration. The demo took place at the University of Tennessee Knoxville and ran from the…
Department of Defense Sees Deployable System 3D Print 11 Metal Parts at RIMPAC War Games
SPEE3D, the Australian original equipment manufacturer (OEM) of cold spray additive manufacturing (CSAM) systems, has participated in its latest war games event, the Department of Defense (DoD)’s Rim of the…
Measure AM Value, Not AM Printers
In our previous article, “RIP 3D Printing. Long Live AM!” we suggested that the paradigm was shifting. It is moving away from the printer OEM being the center of the…
SPEE3D Demonstrates Cold Spray 3D Printing in US Navy SALVEX Exercise
SPEE3D, the Australian original equipment manufacturer (OEM) of cold spray additive manufacturing (CSAM) systems, announced that the company participated in the Naval Sea Systems Command (NAVSEA) SALVEX exercise, at Naval…
3D Printing News Briefs, June 1, 2024: Sustainability, Cementitious Materials, & More
In today’s 3D Printing News Briefs, we’ll start with sustainability research on AM feedstock from AMGTA, and then on to an aluminum alloy with enhanced mechanical properties. University students built…
SPEE3D’s Takes Cold Spray 3D Printing to New Jersey Innovation Institute
SPEE3D, the Australian original equipment manufacturer (OEM) of cold spray additive manufacturing (AM) systems, has sold a WarpSPEE3D printer to the New Jersey Innovation Institute (NJII), part of the New…
3D Printing Unpeeled: $5000 Cold Spray 3D Printer, Roland DGA & Living Materials
The AeroForge is a $5000 cold spray metal printer for copper made by a student team at Rice University. In a paper for ACS Central Science a team from Nanjing…
Targeting the Metal 3D Printing Niche at Solvus Global’s Powders on Demand
According to the “Metal AM Markets: 2023” report from Additive Manufacturing Research, metal powders for 3D printing are set to reach nearly $1 billion in revenues by 2023. While laser powder…
Air Force Awards $1.25M Contract for 3D Printing In-Situ Monitoring Solution to Phase3D
The Air Force Research Laboratory (AFRL) has awarded a contract to Phase3D, a Chicago-based startup specializing in in-situ monitoring (ISM) solutions for powder-based additive manufacturing (AM), to develop a quality…
Metal 3D Printing as Strategic Economics: CTO Steven Camilleri on SPEE3D’s Vision
When writing about emerging companies, especially in tech-heavy spaces, it’s always tempting to try to use Apple as a frame of reference. I try to fight that temptation in terms…
3D Printing News Briefs, December 10, 2022: Top Workplaces & Nitinol & More
We’re starting with business in today’s 3D Printing News Briefs—Elementum 3D hired a new COO, and the Boston Globe named Seurat Technologies a Top Five Place to Work. Moving on,…
SPEE3D’s Metal 3D Printing Poised for 2023 Breakout
SPEE3D isn’t planning on doing its own missions to space any time soon. Its CEO, Byron Kennedy, was quick to point this out when I asked about the company’s recently…
3D Printed Rocket Test Fire Heralds Space Future for Australia’s SPEE3D
Australian 3D printing firm SPEE3D has an inexpensive and very productive 3D printing technology that is hereto been known mainly for its potential in austere environments. The cold spray firm has…
3D Printing News Briefs, November 9, 2022: Deep-Learning, X-Ray CT Inspection & More
Kicking off our 3D Printing News Briefs today is the awarding of a Horizon Europe grant to Titomic Europe, and then on to news from ORNL, which developed a deep-learning…
British Army Invites SPEE3D to Demonstrate Rapid Metal 3D Printing for U.S. Military
The U.S. is intent on further developing a relationship with its closest allies, working together with the U.K. and Australia to 3D print hypersonics and more. Now ,Australian firm SPEE3D…
SPEE3D Releases XSPEE3D: “World’s Fastest All-In-One, Containerized Metal 3D Printer”
In 2022, numerous developments seem to be signaling that metal additive manufacturing (AM) has entered a new era in its history. One company epitomizing this trajectory is Australia’s SPEE3D, which…
Parts 3D Printed on US Naval Ship Signals Sea Change in Military Supply Chain
Correction 9/9/22: This article previously stated that SPEE3D was the first to 3D print parts aboard a naval vessel. We have recently learned that Xerox successfully 3D printed metal parts…
3D Printing News Briefs, September 8, 2022: Boosting Startups, Expansion in the Middle East, and More
In today’s 3D Printing News Briefs, we have lots of business, as Titomic enters the Middle Eastern markets in a new reseller partnership. Metafold has secured $500,000 CAD in pre-seed…
Aussie Cold Spray 3D Printer Maker Enters Mining Market
Titomic, the Australian original equipment manufacturer (OEM) specializing in cold spray additive manufacturing (AM), announced a second order this month from mining services company Brauntell, also based in Australia. Additionally,…
A Holistic Approach to Metal 3D Printing Process Selection for Aerospace Parts
Summarized by Tessa Fedotowsky, Paul Gradl, Darren Tinker NASA Marshall Space Flight Center Metal additive manufacturing (AM) use in the aerospace industry has become more prevalent in the last decade…
US Navy Selects Cold Spray Metal 3D Printing for 2022 REPTEX
VRC Metal Systems, an original equipment manufacturer (OEM) based in South Dakota, announced that the company has been selected to participate in the 2022 REPTEX hosted by the U.S. Navy….
Aussie Transport Companies Adopt Cold Spray Metal 3D Printing
Titomic (ASX: TTT) has previously sold its Kinetic Fusion technology to the marine, defense, and aerospace sectors for a variety of applications, including drones. Now, the Aussie company reports that…
3D Printing Webinar and Event Roundup: July 10, 2022
It’s another busy week of 3D printing-related events and webinars! Markforged and Stratasys are both conducting tours, 3D Systems is holding a webinar on lightweighting structures for NASA, and the…
SPEE3D Adds Stainless Steel, Titanium & Nickel Based Carbide 3D Printing
Australian 3D printing firm SPEE3D has introduced a new nozzle which allows the firm’s technology to 3D print in stainless steel, titanium and nickel-based carbides. Nickel-based carbides are high-strength metals,…
