OSD ManTech
3D Printing News Briefs, April 8, 2026: LiDAR Scanning, Vapor Smoothing, FDM Optimization, & More
We’ll kick off today’s 3D Printing News Briefs with some 3D scanning news from Artec 3D, and then move on to new America Makes Project Calls. Then, Raise3D and AMT…
3D Printing News Briefs, March 26, 2026: AMUK, IP Dispute, Asbestos, & More
We’re kicking off today’s 3D Printing News Briefs with an America Makes Project Call, and then moving on to additive manufacturing in the UK. Then we’ve got some legal news…
3D Printing News Briefs, March 21, 2026: Resin Safety, 3D Printed Bandages, & More
We’re kicking off this weekend’s 3D Printing News Briefs with some America Makes project call news, and then moving on to resin safety myths. We’ll end with a 3D printed…
Shocking! America Makes Wants to Give You Money Again
With two new project calls, America Makes would like to give you $35 million. Powered by the Office of the Under Secretary of Defense, Manufacturing Technology Office (OSD ManTech). OSD…
3D Printing News Briefs, January 31, 2026: Project Calls, Sand Binder Jetting, Eyewear, & More
We’re starting with two new America Makes Project Calls in this weekend’s 3D Printing News Briefs, followed by a 3D printer purchase and a distribution agreement. We’ll finish with AM…
Skuld Brings Additive-Enabled Casting Closer to Production Reality
Over the past decade, much of the U.S. Department of Defense’s (DoD) additive manufacturing (AM) strategy has focused on proving that advanced manufacturing could work inside legacy casting environments. Today,…
3D Printing News Briefs, October 22, 2025: AMUG Innovator, Corrosion, Recycling Initiative, & More
Exciting news to kick off today’s 3D Printing News Briefs: Formlabs Co-Founder and CEO Max Lobovsky is the recipient of the 2026 AMUG Innovators Award. Then, America Makes announced a…
ASTRO America Receives $1.6 Million for Inspection & Qualification Project
ASTRO America is set to receive $1.66 million from the Office of the Under Secretary of Defense, Manufacturing Technology Office (OSD ManTech), via America Makes and the National Center for…
America Makes, MMX, & Where U.S. Advanced Manufacturing Goes from Here
I’ve seen plenty of people say more or less this same thing over the last few years: what’s standing in the way of AM’s scale-up in the U.S. defense industrial…
America Makes Launches $1.7M Project Call to Train & Qualify AM Suppliers for Defense at MMX 2025
America Makes has announced a new funding opportunity to strengthen the U.S. defense supply chain through additive manufacturing (AM). Backed by $1.7 million from the Department of Defense (DoD), the…
3D Printing News Briefs, May 31, 2025: Project Call, Consortium, Certification, & More
We’re starting with the latest America Makes Project Call in today’s 3D Printing News Briefs, and a consortium to promote the adoption of additive manufacturing has been founded in Spain….
3D Printing News Briefs, May 10, 2025: Project Call, FDA 510(k) Clearance, & More
In today’s 3D Printing News Briefs, America Makes has put out its latest Project Call, and Nikon SLM Solutions is adding Dyndrite LPBF Pro software to its product offering. Moving…
MMX 2024: America Makes State of the Union & Operations Update
I always view the annual America Makes Members Meeting & Exchange (MMX) as my unofficial start to the additive manufacturing (AM) industry’s conference cycle. However, it’s a very different vibe than the…
Defense Official: Pentagon is “Turning a Corner” in 3D Printing
Just after the Pentagon made announcements of $270 million in new spending for US advanced manufacturing efforts in a span of less than ten days, Keith DeVries, the deputy director…
The Pentagon Wants to Use 3D Printing for Hypersonic Weapon Parts
A new project of the office of the secretary of defense (OSD) is looking to support the additive manufacturing required to build the Pentagon’s hypersonic capabilities. To that end, the…
