materialise

3D Printing Webinar and Event Roundup: June 26, 2022

Events for this week have already started, like the ISTE Live conference for technology in education down in New Orleans. Stratasys continues its Experience Tour in Ohio, Divide by Zero…

3D Printing Webinar and Event Roundup: June 19, 2022

It’s another busy week of events and webinars coming up, starting with the AM Industry Summit in Long Beach. 3D Delta Week and the Silicone Expo are also taking place,…

Materialise CEO Talks 3D Printing Software and Ethics at RAPID+TCT

With the newest release of its Magics software and its new CO-AM platform, Materialise (Nasdaq: MTLS) is demonstrating how it continues to mature with the additive manufacturing (AM) industry. On…

3D Printing Webinar and Event Roundup: May 15, 2022

This is a big week in the additive manufacturing industry—RAPID + TCT is here! But that’s not the only event in town; there will also be webinars on topics like…

Materialise CO-AM Unites 3D Printing Software in the Cloud

Materialise (Nasdaq: MTLS) aims to cement its software leadership through its new CO-AM Platform, an open software tool that integrates the offerings of different cloud-based software vendors. The platform enables…

3D Printing Webinar and Event Roundup: May 8th, 2022

We’ve got another busy week of webinars and events in the AM industry ahead of us, with topics covering 3D printed housing, robotics, the supply chain, multimaterial 3D printing, generative…

3D Printing Webinar and Event Roundup: April 24, 2022

The last few weeks have been a little slow in terms of 3D printing webinars and events, but this week is more than making up for it! Topics run the…

3D Printing Webinar and Event Roundup: April 3, 2022

While there aren’t quite as many webinars and events this week, don’t think the industry is any less busy—the AMUG 2022 Conference is kicking off today! There are several other…

Eco-Friendly 3D Printed Glasses Now Available Thanks to Materialise

Materialise (Nasdaq: MTLS) has announced the adoption of bio-based Polyamide 11 (PA 11) for selective laser sintering (SLS). Derived from sustainably farmed castor beans, the material is already being used…

3D Printing Webinar and Event Roundup: March 20, 2022

We’ve got another busy week of webinars and events to share with you in today’s roundup! Topics include metal 3D printing, simulation software, the oil and gas industry’s supply chain,…

3D Printing Webinar and Event Roundup: March 13, 2022

We’ve got a busy week of webinars and virtual events ahead, covering topics from polymer 3D printing, improving patient screening with 3D CT scans, DfAM, LinkedIn branding, manufacturing workflow management,…

Materialise Reports FY 2021 Profit, 21% Revenue Increase

As one of 3D printing’s pioneers, long-running additive manufacturing (AM) service provider Materialise (NASDAQ: MTLS) is one of a growing number of companies whose financial statements are shared with the…

Metal 3D Printing at AMS 2022: Series Production of Metal Parts

Last week we held our annual Additive Manufacturing Strategies (AMS) summit, co-hosted with SmarTech Analysis, and after going virtual last year due to the pandemic, it was great to be…

3D Printing Webinar and Event Roundup: March 6, 2022

In this week’s round up of webinars and events, topics will range from closed-loop additive manufacturing quality control and World for 3D printing to microfabrication for medical applications and more….

Aerospace 3D Printing Applications for Aftermarket Targeted by Materialise and Proponent

Last year we reported on a new partnership between Materialise (NASDAQ: MTLS) and aerospace parts distributor Proponent to reinforce the aerospace aftermarket supply chain. Now, Materialise has revealed that during…

3D Printing Webinar and Event Roundup: February 26, 2022

We’ve got a super full week of webinars and events to tell you about for this coming week, including one of our own—Additive Manufacturing Strategies 2022 will be held as…

2022 Predictions: How Auto 3D Printing is Set to Transform Ford, VW and More

Recently, our executive editor Joris Peels explained that, in the automotive industry, 3D printing is typically used most often for unique, mass-customized components; very low-run production items; “some weight savings…

Featured

2022 Predictions: Medical 3D Printing Is Disrupting Healthcare

According to Savi Baveja, HP’s Chief Strategy & Incubation Officer, technologies such as 3D printing and microfluidics are beginning to “realize the better outcomes that have long been promised of…

Metal 3D Printing Quality Control Systems Developed by Materialise and Sigma Labs

Quality control has long been the Achilles heel of metal 3D printing. This is particularly true for metal powder bed fusion (PBF), where countless variables interact to make the process…

3D Printing Webinar and Event Roundup: January 16, 2022

We’re back in business this week with plenty of webinars and events, both virtual and in-person, starting with the second edition of the all-female-speaker TIPE 3D Printing conference. There are…

India’s Primaeam Solutions Opens 3D Printing Service with Materialise

Primaeam Solutions Pvt Ltd, an additive manufacturing (AM) services has announced the opening of a new, 10,000 sq. ft. service bureau located in the firm’s home city of Chennai, the…

3D Printing News Briefs, January 5, 2022: Software, Research, & More

We’re kicking off today’s 3D Printing News Briefs with 3D software, as Materialise has integrated Siemens’ Parasolid with its own Magics software. Moving on, The Virtual Foundry launched a metal…

2022 Predictions: 3D Printing Software Experts Weigh in

Software is moving into the driving seat as the competition heats up. More startups and market entry by large companies is broadly predicted. Still, as a user, I have to…

Featured

FDA Aims to Regulate Medical Devices 3D Printed at Point of Care

The U.S. Food and Drug Administration’s (FDA’s) Center for Devices and Radiological Health (CDRH) has published a discussion paper on the topic of 3D printing medical devices at the point…