CLIP

3D Printing Unicorns, Part 2: Carbon

When a privately held startup hits $1 billion in value, it magically transforms from an ugly mare into a beautiful unicorn (or so the legend goes). In the 3D printing…

Joseph DeSimone Out as Carbon CEO Replaced by Ellen Kullman

Sometimes executives wish to spend less time with their families, today Joseph DeSimone is stepping down as Carbon CEO. Joseph will instead become Executive Chairman of the Board. His replacement…

Adidas Kills the Speedfactory: Industrie 4.0 Funeral Date Not Yet Set

Adidas is killing off its Speedfactories. Yes, the 3D printing hypebeast itself, shoe manufacturer Adidas has decided to end its Speedfactories local manufacturing initiative. Just a few years ago the…

Sponsored

Innovative Partnerships Drive 3D Printing Materials Development

Successful adoption of additive manufacturing technologies in mass manufacturing requires close partnerships across hardware, software and materials technologies. In order to unlock 3D printing’s full potential and bring the technology…

Carbon Releases the L1 3D Printer

Carbon has been making progress rolling out its 3D printers worldwide. The company has new directors, expanded its partnership with Ford and boldly reduced the prices on its resins. The company…

Sponsored

The BIG IDEAS for UV + EB Technology Conference is the Place to Learn About Photopolymers and 3D Printing

The Radtech BIG IDEAS for UV+EB Technology conference takes place on Tuesday, March 19th and Wednesday, March 20th in Redondo Beach California. The BIG IDEAS for UV+EB Technology is the…

First Mechanical Properties Tests of 3D Printed Carbon CLIP Lattice Parts

California 3D printing company Carbon, founded in 2013, suddenly hit the scene in 2015 with its innovative Continuous Liquid Interface Production (CLIP) technology, which uses the power of light and oxygen…

Carbon Announces New Dental 3D Printing Materials, Part Serialization and Auto Support Generation

Since their CLIP technology was first released, Silicon Valley-based additive manufacturing company Carbon has been one of the fastest rising stars in the 3D printing industry. Along with the debut…

Carbon Co-Founder and CEO Recognized with Heinz Award for Contributions to Technology, the Economy, Employment

The Heinz Awards were established in 1993 to honor US Senator John Heinz, and every year extraordinary individuals are recognized for their creativity, determination, contributions, and accomplishments in finding real…

SabeRex to Become First Company in Texas to Install Carbon M2 3D Printer

In Austin, Texas, SabeRex has been providing technology-based solutions to its clients for more than two decades. Those services will now include 3D printing, as this month the company is gaining…

3D Printing News Briefs: April 25, 2017

In today’s edition of 3D Printing News Briefs, we’re covering everything from business to 3D printing, scanning, modeling, and design. EOS joins a manufacturing alliance, while a 3D printer gets an…

With 3D Printing Technology from Carbon, Adidas Releases First Partially 3D Printed Athletic Shoe to Be Produced at Scale

In December of 2016, Adidas released the 3D Runner, a limited-edition, $300 running shoe with a 3D printed midsole; the company had been looking toward 3D printing solutions for its shoes since…

Carbon Introduces SpeedCell, an End-to-End Additive Manufacturing Solution that Includes the New M2 3D Printer

It’s been exactly two years since Carbon appeared seemingly out of nowhere with their industry-changing M1 3D printer and CLIP 3D printing technology. The introduction of the technology altered the…

Carbon Introduces New CLIP 3D Printing Materials with Epoxy Resin Family & Addition to Cyanate Ester Family

It’s been a very busy year for Silicon Valley-based 3D printing company Carbon, but a successful one as well. After emerging from stealth with its cutting-edge CLIP 3D printing technology back in…

Las Vegas to San Francisco: Sculpteo Designers Complete Successful Road Trip with 3D Printed Bike

I will never forget when my dad taught me how to ride my bike without training wheels for the first time. We went to a small, nearby shopping plaza and…

Sculpteo Was Everywhere I Wanted to Be at CES 2017

The guy I had a crush on my freshman year of college seemed to be everywhere I went on campus. I’d see him daily in the dining hall, at parties,…

Industry 4.0 is Moving at a Fast CLIP — A Few Questions For: Carbon

One of the most fascinating companies in 3D printing over the last two years has undeniably been Carbon. The company’s high-speed CLIP technology allows for 3D printing in unprecedented times…

Carbon Announces $81 Million in Series C Funding from New and Existing Investors, Accelerates Production for Global Expansion

Since Carbon introduced their industry-changing CLIP technology last year, we’ve been closely following the company as they amass a growing list of customers and partners. Early users of CLIP have delivered…

Carbon Announces Two New Partners: Midwest Prototyping and Dinsmore Inc. Now Offer CLIP 3D Printing Services

Some of the biggest news in 3D printing over the past year has involved Carbon and their groundbreaking CLIP technology. It’s been almost a year and a half since the…

Carbon’s M1 3D Printer Can Even Print Itself – Partially

I haven’t yet heard a negative thing about Carbon’s M1 3D printer since its release in April. Case studies are already confirming that the hype surrounding the printer isn’t just…

Sculpteo Now Offering Two More CLIP Resin Materials to the General Public

Earlier in the year online 3D printing services company Sculpteo launched their CLIP Technology Beta Pilot Program. As one of the few corporate partners given the chance to work with the…

Case Study: Carbon’s CLIP Technology Lives Up to the Hype for Automotive Manufacturer Delphi

Unless you’ve been living under a 3D printed rock for the last year, you’re probably at least marginally acquainted with Carbon and their groundbreaking CLIP technology. For a while, it seemed as…

Disney Research Just Invented a “3D Copier” That Uses Light-Cured Resin to Duplicate Entire Objects Instantly

Using light-cured resins to 3D print physical objects is not a new technology. In fact, the oldest form of 3D printing is stereolithography (SLA), a process that uses a laser…

A Key Keynote: Carbon’s CEO & Co-Founder to Present Opening Keynote at Inside 3D Printing NY Next Week

While things we can agree on pretty universally are certainly few and far between, one thing is abundantly clear to those watching the 3D printing space: the technology behind Carbon‘s super-fast,…