inside 3d printing

Applications Now Being Accepted for Speakers at Inside 3D Printing San Diego 2017

Applications Now Being Accepted for Speakers at Inside 3D Printing San Diego 2017

As we approach midsummer, it seems odd to be thinking about December, but it’s already time to start planning for Inside 3D Printing San Diego, which will be taking place from December 4-5 this year. It seems like just yesterday that 3DPrint.com was in San Diego for last year’s conference, which was a memorable one with several […]

As we approach midsummer, it seems odd to be thinking about December, but it’s already time to start planning for Inside 3D Printing San Diego, which will be taking place from December 4-5 this year. It seems like just yesterday that 3DPrint.com was in San Diego...
Owl Works Wins Big at Inside 3D Printing Seoul's Frontier Tech Showdown with Innovative LIPS 3D Printing Technology

Owl Works Wins Big at Inside 3D Printing Seoul's Frontier Tech Showdown with Innovative LIPS 3D Printing Technology

Last week, the highly anticipated Inside 3D Printing Seoul event took place at KINTEX in South Korea. We’d been following the anticipated highlights of the Rising Media event, themed “The New Era of Digital Manufacturing,” which boasted nearly 75 exhibitors, 210 sponsor booths, and over 9,000 visitors from 25 different countries. One of our favorite parts of […]

Last week, the highly anticipated Inside 3D Printing Seoul event took place at KINTEX in South Korea. We’d been following the anticipated highlights of the Rising Media event, themed “The New Era of Digital Manufacturing,” which boasted nearly 75...
The New Era of Digital Manufacturing: Inside 3D Printing Seoul 2017

The New Era of Digital Manufacturing: Inside 3D Printing Seoul 2017

3D printing technologies are advancing in both capabilities and profile around the world, and lately Asia has been in the spotlight. One week from today, Inside 3D Printing Seoul will kick off in South Korea as the 2017 event runs June 28-30. This represents the fourth annual event in the Republic of Korea as 3D […]

3D printing technologies are advancing in both capabilities and profile around the world, and lately Asia has been in the spotlight. One week from today, Inside 3D Printing Seoul will kick off in South Korea as the 2017 event runs June 28-30. This represents the...
Program Released For Upcoming Inside 3D Printing Melbourne Conference and Expo

Program Released For Upcoming Inside 3D Printing Melbourne Conference and Expo

Right now we are all pretty focused on the RAPID + TCT event currently going on in Pittsburgh, but that’s not the only major 3D printing industry event and conference taking place this week. As promised at the wintry Inside 3D Printing New York in March, global events and media producer Rising Media has announced the […]

Right now we are all pretty focused on the RAPID + TCT event currently going on in Pittsburgh, but that’s not the only major 3D printing industry event and conference taking place this week. As promised at the wintry Inside 3D Printing New York in March, global...
Inside 3D Printing New York: Delayed by Winter Storm, the Show Goes On

Inside 3D Printing New York: Delayed by Winter Storm, the Show Goes On

Attendees of the Inside 3D Printing New York Conference & Expo (I3DP) were in for quite a surprise this week, as winter storm Stella wreaked havoc with travel plans. The organizers of Inside 3D Printing were forced to move the conference back by a day, less than 14 hours before the show start, on Tuesday. […]

Attendees of the Inside 3D Printing New York Conference & Expo (I3DP) were in for quite a surprise this week, as winter storm Stella wreaked havoc with travel plans. The organizers of Inside 3D Printing were forced to move the conference back by a day, less than...
Nanogrande Braves Winter Storm Stella to Win Frontier Tech Showdown at Inside 3D Printing New York

Nanogrande Braves Winter Storm Stella to Win Frontier Tech Showdown at Inside 3D Printing New York

How about that storm this week? Stella (it still makes me laugh that we’re naming winter storms now) messed things up for quite a few people around the eastern part of the United States a few days ago. The worst part for me was the hour (okay, more like 10 minutes, but it felt like […]

How about that storm this week? Stella (it still makes me laugh that we’re naming winter storms now) messed things up for quite a few people around the eastern part of the United States a few days ago. The worst part for me was the hour (okay, more like 10...
Dr. Oren Tepper, Famous for Separating Conjoined Twins, Announced as Keynote Speaker at Inside 3D Printing New York; Early Details Released for June Conference in Seoul

Dr. Oren Tepper, Famous for Separating Conjoined Twins, Announced as Keynote Speaker at Inside 3D Printing New York; Early Details Released for June Conference in Seoul

Right now I can’t figure out what season it is – we got several inches of snow the other day, and then the temperature shot up by about 30 degrees overnight and everything melted and flooded, then there was a windstorm and by tonight it’s supposed to snow again. It’s all been very stressful and […]

Right now I can’t figure out what season it is – we got several inches of snow the other day, and then the temperature shot up by about 30 degrees overnight and everything melted and flooded, then there was a windstorm and by tonight it’s supposed to...
Germany's Saxony-Anhalt Region Shines at Inside 3D Printing Singapore

Germany's Saxony-Anhalt Region Shines at Inside 3D Printing Singapore

At last year’s Inside 3D Printing Singapore, HP Inc. exhibited its new 3D printing multi-jet fusion technology and showed off some samples, as well as a series of video demonstrations, mere months before their highly-anticipated public unveiling. And right before the expo began, it was announced that Rising Media and 3DR Holdings had purchased the […]

At last year’s Inside 3D Printing Singapore, HP Inc. exhibited its new 3D printing multi-jet fusion technology and showed off some samples, as well as a series of video demonstrations, mere months before their highly-anticipated public unveiling. And right...
Startups Take Note: Frontier Tech Showdown Submission Deadline Approaching for Inside 3D Printing NYC

Startups Take Note: Frontier Tech Showdown Submission Deadline Approaching for Inside 3D Printing NYC

Back in 2016, the Inside 3D Printing Conference and Expo and its sister expo RoboUniverse, both of which are put on by global events producer Rising Media, combined their individual Startup Competitions to make one big contest, adding virtual reality to the mix, called the Frontier Tech Showdown. Seed-stage startups from any of the three […]

Back in 2016, the Inside 3D Printing Conference and Expo and its sister expo RoboUniverse, both of which are put on by global events producer Rising Media, combined their individual Startup Competitions to make one big contest, adding virtual reality to the mix,...
Rising Media Announces Tracks for Inside 3D Printing New York, Coming in March

Rising Media Announces Tracks for Inside 3D Printing New York, Coming in March

It’s been less than two months since we wrapped up Inside 3D Printing San Diego, but we’re already looking forward to the next iteration of the giant 3D printing conference and expo. From March 14-15, businesses, experts and enthusiasts from the 3D printing world will descend on New York City’s Javits Center for Inside 3D Printing […]

It’s been less than two months since we wrapped up Inside 3D Printing San Diego, but we’re already looking forward to the next iteration of the giant 3D printing conference and expo. From March 14-15, businesses, experts and enthusiasts from the 3D...
Augmented Reality, Business and Breasts -- A Few Questions For: ILLUSIO Imaging

Augmented Reality, Business and Breasts -- A Few Questions For: ILLUSIO Imaging

Because reality isn’t the only thing that can stand to be augmented, we were recently introduced to the use of AR technology in breast augmentation surgery consultations as California-based ILLUSIO Imaging was one of two winners in the first-ever double win at the Frontier Tech Showdown held earlier this month at Inside 3D Printing San Diego. […]

Because reality isn’t the only thing that can stand to be augmented, we were recently introduced to the use of AR technology in breast augmentation surgery consultations as California-based ILLUSIO Imaging was one of two winners in the first-ever double win at...
Around the World in 3D Printing: 2016 in Review

Around the World in 3D Printing: 2016 in Review

Throughout the last 12 months, we’ve been following growth in every aspect of the 3D printing industry, from hardware introductions to software developments to new materials set to bring new ideas into reality. A huge part of my year has entailed packing up and heading out to different locations to share with you directly the […]

Throughout the last 12 months, we’ve been following growth in every aspect of the 3D printing industry, from hardware introductions to software developments to new materials set to bring new ideas into reality. A huge part of my year has entailed packing up and...
Additive Manufacturing Research Examines Metal 3D Printing Industry: 2016 in Review, Predictions for 2017

Additive Manufacturing Research Examines Metal 3D Printing Industry: 2016 in Review, Predictions for 2017

With barely a week left before New Year’s, year-end nostalgia tends to rear its head; I think most of the world agrees, though, that it’s about time for 2016 to go gentle into that good night, as this past year has been globally tumultuous. As we all begin looking ahead to 2017, with hopes of ringing […]

With barely a week left before New Year’s, year-end nostalgia tends to rear its head; I think most of the world agrees, though, that it’s about time for 2016 to go gentle into that good night, as this past year has been globally tumultuous. As we all begin...
Inside 3D Printing San Diego 2016 in Photos

Inside 3D Printing San Diego 2016 in Photos

Another whirlwind show has come and gone, and left us with a lot to talk about! Inside 3D Printing San Diego, held in conjunction with RoboUniverse and Virtual Reality Summit as part of the Frontier Tech Forum, was held on December 14th and 15th in sunny San Diego, California, bringing together members of the 3D […]

Another whirlwind show has come and gone, and left us with a lot to talk about! Inside 3D Printing San Diego, held in conjunction with RoboUniverse and Virtual Reality Summit as part of the Frontier Tech Forum, was held on December 14th and 15th in sunny San Diego,...
Terry Wohlers Discusses the Future of 3D Printing at Inside 3D Printing Keynote

Terry Wohlers Discusses the Future of 3D Printing at Inside 3D Printing Keynote

In this morning’s keynote at Inside 3D Printing San Diego, Terry Wohlers, Principal Consultant and President of Wohlers Associates, Inc., presented his thoughts in a session titled, “The Future of 3D Printing.” Now celebrating the company’s 30 years and 21 years with the Wohlers Report, Wohlers acknowledged a long history in 3D printing as well […]

In this morning’s keynote at Inside 3D Printing San Diego, Terry Wohlers, Principal Consultant and President of Wohlers Associates, Inc., presented his thoughts in a session titled, “The Future of 3D Printing.” Now celebrating the company’s 30...
Collider Unveiled: Company Emerges from Stealth, Introduces 3D Printing and Programmable Tooling Technology

Collider Unveiled: Company Emerges from Stealth, Introduces 3D Printing and Programmable Tooling Technology

Nearly a year ago now, we were first introduced to the promising startup Collider, a Chattanooga, Tennessee-based company operating in stealth mode and picking up investments from such big names as Asimov Ventures and the Chattanooga Renaissance Fund. Wednesday at Inside 3D Printing San Diego, the company has officially come out of stealth mode, revealing […]

Nearly a year ago now, we were first introduced to the promising startup Collider, a Chattanooga, Tennessee-based company operating in stealth mode and picking up investments from such big names as Asimov Ventures and the Chattanooga Renaissance Fund. Wednesday at...
Inside 3D Printing San Diego: Hod Lipson Discusses the Next 25 Years of 3D Printing

Inside 3D Printing San Diego: Hod Lipson Discusses the Next 25 Years of 3D Printing

Inside 3D Printing San Diego is here. The conference, tied in as the Frontier Tech Forum alongside RoboUniverse and Virtual Reality Summit, officially kicked off this morning in San Diego. To open the show, Asimov Ventures‘ Tyler Benster took to the podium to welcome attendees and present an overview of what we can expect to see […]

Inside 3D Printing San Diego is here. The conference, tied in as the Frontier Tech Forum alongside RoboUniverse and Virtual Reality Summit, officially kicked off this morning in San Diego. To open the show, Asimov Ventures‘ Tyler Benster took to the podium to...
3D Printing Startup Cubibot Announces New Printer at Inside 3D Printing San Diego

3D Printing Startup Cubibot Announces New Printer at Inside 3D Printing San Diego

The Inside 3D Printing San Diego expo officially begins tomorrow, December 14. I know we can expect all kinds of big announcements, exciting demonstrations, and new, cutting-edge 3D printer reveals over the course of the two-day conference. But today, San Diego-based 3D printing startup Cubibot got the jump on everyone and announced the official debut of their […]

The Inside 3D Printing San Diego expo officially begins tomorrow, December 14. I know we can expect all kinds of big announcements, exciting demonstrations, and new, cutting-edge 3D printer reveals over the course of the two-day conference. But today, San Diego-based...
Frontier Tech Forum in San Diego Starts in Less Than Two Weeks - Register Now!

Frontier Tech Forum in San Diego Starts in Less Than Two Weeks - Register Now!

It’s hard to believe that it’s December already – particularly because it was 60°F  here in Ohio a couple of days ago. That’s like San Diego weather. Today, unfortunately, the weather is much more seasonal and much less pleasant, so I may have to flee to San Diego – and conveniently, the Frontier Tech Forum starts […]

It’s hard to believe that it’s December already – particularly because it was 60°F  here in Ohio a couple of days ago. That’s like San Diego weather. Today, unfortunately, the weather is much more seasonal and much less pleasant, so I may have...
Rising Media Announces First Inside 3D Printing Istanbul Event with Deutsche Messe

Rising Media Announces First Inside 3D Printing Istanbul Event with Deutsche Messe

Rising Media is announcing a new Inside 3D Printing show! Along with international trade fair planning and staging company Deutsche Messe, they are launching the first-ever Inside 3D Printing Istanbul, a new event taking place February 9-12 of 2017. It’s sandwiched between Inside 3D Printing Düsseldorf on February 2 and 3, and Inside 3D Printing Singapore on February 14 and 15. […]

Rising Media is announcing a new Inside 3D Printing show! Along with international trade fair planning and staging company Deutsche Messe, they are launching the first-ever Inside 3D Printing Istanbul, a new event taking place February 9-12 of 2017. It’s...
Rising Media to Launch Frontier Tech Forum in San Diego December 14-15

Rising Media to Launch Frontier Tech Forum in San Diego December 14-15

If you’ve ever attended a big conference or tradeshow that caters directly to your interests, then you are aware of the almost overwhelming amount of stimulation provided as you are able to learn everything—and then some—that you may have ever wanted to know about manufacturers you are familiar with, as well as checking out new […]

If you’ve ever attended a big conference or tradeshow that caters directly to your interests, then you are aware of the almost overwhelming amount of stimulation provided as you are able to learn everything—and then some—that you may have ever wanted to know about...
Second Frontier Tech Showdown to Take Place in December: Startups in 3D Printing, Robotics and Virtual Reality Invited to Apply

Second Frontier Tech Showdown to Take Place in December: Startups in 3D Printing, Robotics and Virtual Reality Invited to Apply

At the beginning of this year, Rising Media, the company behind the successful Inside 3D Printing Conference & Expo series, as well as the RoboUniverse and Virtual Reality Summit trade shows, announced a newly developed competition, to debut at Inside 3D Printing New York in April. The Frontier Tech Showdown combined the regular Inside 3D Printing and […]

At the beginning of this year, Rising Media, the company behind the successful Inside 3D Printing Conference & Expo series, as well as the RoboUniverse and Virtual Reality Summit trade shows, announced a newly developed competition, to debut at Inside 3D Printing...
From Food to Vehicles, Robots Will Be Everywhere -- A Few Questions For: Hod Lipson

From Food to Vehicles, Robots Will Be Everywhere -- A Few Questions For: Hod Lipson

No matter where you turn in the tech industry these days, certain names always rise to the top of any conversation. Among these individuals is the inimitable Hod Lipson, whose career path is so storied his CV takes up 53 pages. Lipson, a PhD who previously worked with Cornell and as the editor-in-chief of 3D Printing and […]

No matter where you turn in the tech industry these days, certain names always rise to the top of any conversation. Among these individuals is the inimitable Hod Lipson, whose career path is so storied his CV takes up 53 pages. Lipson, a PhD who previously worked with...
3D Printing as a Catalyst for the Next Industrial Revolution -- A Few Questions For: AJ Perez

3D Printing as a Catalyst for the Next Industrial Revolution -- A Few Questions For: AJ Perez

From its origin as a startup founded by a group of MIT graduates, Boston-based New Valence Robotics, more commonly known as NVBOTS, has seen incredible leaps forward, seeing success in crowdfunding and in seed funding, launching game-changing tech from the very beginning. This year has been an exciting one for the company, seeing multi-material metal 3D […]

From its origin as a startup founded by a group of MIT graduates, Boston-based New Valence Robotics, more commonly known as NVBOTS, has seen incredible leaps forward, seeing success in crowdfunding and in seed funding, launching game-changing tech from the very...
Rising Media and Innorobo Present 3DPrinting@home and Robot@home, Taking Place Within IFA Global Markets

Rising Media and Innorobo Present 3DPrinting@home and Robot@home, Taking Place Within IFA Global Markets

Rising Media, producer of the Inside 3D Printing, RoboUniverse, and Virtual Reality Summit trade shows, is committed to keeping things fresh and interesting. While it’s unlikely that 3D printing, robotics or virtual reality are going to get stale or boring anytime soon, Rising Media likes to change things up a little bit every now and […]

Rising Media, producer of the Inside 3D Printing, RoboUniverse, and Virtual Reality Summit trade shows, is committed to keeping things fresh and interesting. While it’s unlikely that 3D printing, robotics or virtual reality are going to get stale or boring...