CES

3D Printing Companies Stand Out on Digital Trends' Top Tech of CES 2017 List

3D Printing Companies Stand Out on Digital Trends' Top Tech of CES 2017 List

Although CES 2017 wrapped up a couple of days ago, the news is still flowing about the largest consumer technology trade show in the world. If you haven’t checked out our coverage of the event, take a look at some of the announcements, interviews, and photos that we gathered over the last week. 3DPrint.com was onsite […]

Although CES 2017 wrapped up a couple of days ago, the news is still flowing about the largest consumer technology trade show in the world. If you haven’t checked out our coverage of the event, take a look at some of the announcements, interviews, and photos...
CES 2017: 3D Printing Days Three and Four in Photos

CES 2017: 3D Printing Days Three and Four in Photos

As CES continued, the energy never abated in Las Vegas. With most of the major announcements having been made on Thursday and Friday, that left Saturday and Sunday more available for time to walk the exhibit floors — and there was certainly a lot to see, as the Consumer Technology Association explained: “With more than […]

As CES continued, the energy never abated in Las Vegas. With most of the major announcements having been made on Thursday and Friday, that left Saturday and Sunday more available for time to walk the exhibit floors — and there was certainly a lot to see, as the...
Exclusive Interview: ZMorph CEO Talks 3D Printing & Digital Fabrication at CES 2017

Exclusive Interview: ZMorph CEO Talks 3D Printing & Digital Fabrication at CES 2017

CES may be the largest trade show in North America, but its impact is truly global as companies — and attendees — from around the world come together each January in Las Vegas to showcase and check out the latest in technology. Highlighting the global focus of this massive event are companies that are stars […]

CES may be the largest trade show in North America, but its impact is truly global as companies — and attendees — from around the world come together each January in Las Vegas to showcase and check out the latest in technology. Highlighting the global...
CES 2017: Day Two in 3D Printing & 3D Scanning Shows More Hardware, More Focus

CES 2017: Day Two in 3D Printing & 3D Scanning Shows More Hardware, More Focus

On Friday, CES 2017 was again in full swing following a very busy day one — many exhibitors braced themselves for what they had heard would be the busiest day of this massive consumer electronics trade show, and the crowds certainly seemed to give proof to that thought. Once everyone had steeled themselves (and filled […]

On Friday, CES 2017 was again in full swing following a very busy day one — many exhibitors braced themselves for what they had heard would be the busiest day of this massive consumer electronics trade show, and the crowds certainly seemed to give proof to that...
CES 2017: Day One at The Sands Expo Showcased 3D Printing & 3D Scanning Advances

CES 2017: Day One at The Sands Expo Showcased 3D Printing & 3D Scanning Advances

If there’s one thing I’m picking up on this week, it’s that what happens in Vegas most certainly does not stay in Vegas. The announcements rolling in from CES 2017 are abundant and spreading like wildfire. Yesterday marked the first official day of the largest trade show in North America — and the world’s largest consumer technology […]

If there’s one thing I’m picking up on this week, it’s that what happens in Vegas most certainly does not stay in Vegas. The announcements rolling in from CES 2017 are abundant and spreading like wildfire. Yesterday marked the first official day of...
CES 2017 Flying High Before Official Start: Drone Rodeo and Pepcom's Digital Experience!

CES 2017 Flying High Before Official Start: Drone Rodeo and Pepcom's Digital Experience!

CES is the largest trade show in the United States – and even with this year’s event beginning the festivities early with two days of media events ahead of the full event held January 5-8, it’s no secret that the show starts before anyone even sets foot in Las Vegas. The event, which this year […]

CES is the largest trade show in the United States – and even with this year’s event beginning the festivities early with two days of media events ahead of the full event held January 5-8, it’s no secret that the show starts before anyone even sets foot in...
HP Unveils the Newly Upgraded Sprout Pro G2 at CES 2017

HP Unveils the Newly Upgraded Sprout Pro G2 at CES 2017

We’ve spent a lot of time talking about HP over the course of the past year, and for good reason – their entrance into the 3D printing industry with the groundbreaking Multi Jet Fusion 3D printing system was huge news that is still generating headlines. In all of the hype surrounding HP’s 3D printing plans, […]

We’ve spent a lot of time talking about HP over the course of the past year, and for good reason – their entrance into the 3D printing industry with the groundbreaking Multi Jet Fusion 3D printing system was huge news that is still generating headlines. In...
Think 3D Printing Won't Be in the Spotlight at CES 2017? Think Again!

Think 3D Printing Won't Be in the Spotlight at CES 2017? Think Again!

This Thursday marks the official opening of the 50th annual CES event, and 3DPrint.com is thrilled that we’re going to be in attendance this year. In 2016, we traveled around the world to report from several of the biggest trade shows in the 3D printing industry, but we’re especially excited about CES 2017, as we’ll get […]

This Thursday marks the official opening of the 50th annual CES event, and 3DPrint.com is thrilled that we’re going to be in attendance this year. In 2016, we traveled around the world to report from several of the biggest trade shows in the 3D printing...
3D Printing at CES 2017

3D Printing at CES 2017

I’m traveling to Las Vegas today for my annual pilgrimage to CES. If you’re unfamiliar, it’s the USA’s largest trade show. Over 165,000 people will attend the event to see and touch the latest innovations in computer technology. Most of the world’s top technology companies will participate somehow by exhibiting, speaking, sponsoring, attending or holding […]

I’m traveling to Las Vegas today for my annual pilgrimage to CES. If you’re unfamiliar, it’s the USA’s largest trade show. Over 165,000 people will attend the event to see and touch the latest innovations in computer technology. Most of the world’s top technology...
Fusion3 Embraces Open 3D Printing Material Philosophy, Adds 3 New Material Categories to Certification List

Fusion3 Embraces Open 3D Printing Material Philosophy, Adds 3 New Material Categories to Certification List

Time and again, we hear about 3D printer manufacturer Fusion3 and the vast range of materials their printers support. Back in 2015, when their commercial-grade F306 3D printer was still new, we mentioned that it could print using nearly any material. We talked about the desktop F400 3D printer‘s enclosed print chamber when it launched earlier this […]

Time and again, we hear about 3D printer manufacturer Fusion3 and the vast range of materials their printers support. Back in 2015, when their commercial-grade F306 3D printer was still new, we mentioned that it could print using nearly any material. We talked about...
Robo Named CES 2017 Honoree, Announces Design Challenge - Win a New Robo R2 or C2 3D Printer!

Robo Named CES 2017 Honoree, Announces Design Challenge - Win a New Robo R2 or C2 3D Printer!

At CES Unveiled New York last week, there was a lot of tech in a very small space at the Metropolitan Pavilion. Among the startups vying for attention at the press-only event were a couple of 3D printing companies, including Robo. Recently, we reported that Robo was getting ready to release two new printers into the […]

At CES Unveiled New York last week, there was a lot of tech in a very small space at the Metropolitan Pavilion. Among the startups vying for attention at the press-only event were a couple of 3D printing companies, including Robo. Recently, we reported that Robo was...
3D Printed Prototypes Helped the Hexo+ Drone Take Action Sports to New Heights

3D Printed Prototypes Helped the Hexo+ Drone Take Action Sports to New Heights

There was so much to see at CE Week NY, that it was hard to take it all in. From multi-functional alarm clocks to tortilla toasters, there was a plethora of home technology on display at the convention. I recently wrote about Phazon, which allows you to take your tunes with you while running, swimming or […]

There was so much to see at CE Week NY, that it was hard to take it all in. From multi-functional alarm clocks to tortilla toasters, there was a plethora of home technology on display at the convention. I recently wrote about Phazon, which allows you to take your...
3D Printing at CES - Part One: The Content

3D Printing at CES - Part One: The Content

I’m back from CES, and am just starting to feel normal again. Maybe it’s all the people? Over 170,000 attended this year. After a while it starts to weigh on you. Lines at the airport, lines for a cab, lines at the hotel, lines at the show, lines for food…and lines for a damn drink. […]

I’m back from CES, and am just starting to feel normal again. Maybe it’s all the people? Over 170,000 attended this year. After a while it starts to weigh on you. Lines at the airport, lines for a cab, lines at the hotel, lines at the show, lines for food…and...
Tiertime Unveils the New and Improved UP mini 2 3D Printer at CES 2016

Tiertime Unveils the New and Improved UP mini 2 3D Printer at CES 2016

When it comes to desktop 3D printers, the smaller the better for a lot of people. Compact printers have always been popular, and Tiertime’s UP mini 3D printer is no exception. The Chinese printer manufacturer has found a great deal of success in their line of UP printers, and the UP mini has been loved for its […]

When it comes to desktop 3D printers, the smaller the better for a lot of people. Compact printers have always been popular, and Tiertime’s UP mini 3D printer is no exception. The Chinese printer manufacturer has found a great deal of success in their line of UP...
Dude, Where’s My JetPack? Check Out Your 3D Printed JB-9 at CES 2016 via JetPack Aviation & Airwolf 3D

Dude, Where’s My JetPack? Check Out Your 3D Printed JB-9 at CES 2016 via JetPack Aviation & Airwolf 3D

No doubt, the jetpack is something to be expected at CES. An iconic example of futuristic technology which has persisted for decades, the concept of flying independently via electronic pack is one that seems almost too good to be true. And for the most part it has been–with the exception of use in space, where […]

No doubt, the jetpack is something to be expected at CES. An iconic example of futuristic technology which has persisted for decades, the concept of flying independently via electronic pack is one that seems almost too good to be true. And for the most part it has...
Wacom Renews and Expands Commitment to 3D at Las Vegas CES 2016

Wacom Renews and Expands Commitment to 3D at Las Vegas CES 2016

You might be interested to know that Craig Barr is in Las Vegas. No, this isn’t a story of an extremely handsome Scottish footballer living it up playing the slot machines. I’m talking about the Craig Barr who has made a name for himself by working on projects in animation, visual effects, and software production and through a […]

You might be interested to know that Craig Barr is in Las Vegas. No, this isn’t a story of an extremely handsome Scottish footballer living it up playing the slot machines. I’m talking about the Craig Barr who has made a name for himself by working on...
Full-Color 3D Printing Service Provider WhiteClouds Announces 3DplusMe Acquisition at CES 2016

Full-Color 3D Printing Service Provider WhiteClouds Announces 3DplusMe Acquisition at CES 2016

While attending the Consumer Electronics Show 2016, Utah-based 3D printing services company WhiteClouds announced that they will be purchasing 3DplusMe, the branded 3D capture-to-print company responsible for the 3D printed likeness kiosks popping up in retail stores all over the country. 3DplusMe has ongoing licensing deals with some of the largest video game, entertainment and […]

While attending the Consumer Electronics Show 2016, Utah-based 3D printing services company WhiteClouds announced that they will be purchasing 3DplusMe, the branded 3D capture-to-print company responsible for the 3D printed likeness kiosks popping up in retail stores...
Mcor Announces the Release of Their First Desktop 3D Printer: The Full-Color, Paper-Based Mcor ARKe

Mcor Announces the Release of Their First Desktop 3D Printer: The Full-Color, Paper-Based Mcor ARKe

With so many 3D printers out there, printer manufacturers have to work hard to stand out from the crowd. If there’s any company that’s expert at standing out, it’s Mcor. The Irish company, which recently celebrated their 10-year anniversary, made a name for themselves with their unique take on 3D printing, which utilizes plain old […]

With so many 3D printers out there, printer manufacturers have to work hard to stand out from the crowd. If there’s any company that’s expert at standing out, it’s Mcor. The Irish company, which recently celebrated their 10-year anniversary, made a...
Consumer Technology Association Report: Internet of Things Will Lead Industry Growth, 3D Printing is a "Tech Sector to Watch"

Consumer Technology Association Report: Internet of Things Will Lead Industry Growth, 3D Printing is a "Tech Sector to Watch"

The start of a new year means a lot of things. Beyond resolutions and self-improvement goals, it also means something a lot more concrete: numbers. As 2016 begins, corporations, industries and market research experts are releasing their projections for the upcoming year, and so far, things are looking good for the technology sector. The Consumer […]

The start of a new year means a lot of things. Beyond resolutions and self-improvement goals, it also means something a lot more concrete: numbers. As 2016 begins, corporations, industries and market research experts are releasing their projections for the upcoming...
3D Printing Matures at CES

3D Printing Matures at CES

I’ve popped vitamins, ate right, and got plenty of sleep over the last week. Now I’m at the International Consumer Electronics Show in Las Vegas. With 5,000+ exhibits and a crowd of 150,000 attendees, I’ll need all the stamina I can muster. What’s Different This Year? It seems every article I read proclaims this year’s […]

I’ve popped vitamins, ate right, and got plenty of sleep over the last week. Now I’m at the International Consumer Electronics Show in Las Vegas. With 5,000+ exhibits and a crowd of 150,000 attendees, I’ll need all the stamina I can muster. What’s Different This Year?...
Ultimaker Announces the Release of the Ultimaker 2+ and Ultimaker 2Extended+ 3D Printers

Ultimaker Announces the Release of the Ultimaker 2+ and Ultimaker 2Extended+ 3D Printers

If the 3D printing world held a popularity contest, Ultimaker would be way up there. In fact, the 3D Hubs Trend Report, which is about as close as the industry comes to a popularity contest, has shown the Ultimaker 2 to consistently rank at the top of the “Most Wanted Printers” category. If you’re on […]

If the 3D printing world held a popularity contest, Ultimaker would be way up there. In fact, the 3D Hubs Trend Report, which is about as close as the industry comes to a popularity contest, has shown the Ultimaker 2 to consistently rank at the top of the “Most...
3D Print Your Own Syfy Originals: New Partnership with Thingiverse Among Syfy's Expanding Tech Opportunities

3D Print Your Own Syfy Originals: New Partnership with Thingiverse Among Syfy's Expanding Tech Opportunities

We all have dreams. Shockingly, I didn’t spend my childhood dreaming of running a 3D printing news site; the technology didn’t exist yet when I was born. Instead, I spent the ’80s and ’90s dreaming the dreams of many a young girl, and thought I’d have a life onstage. Sure, I went on to graduate with […]

We all have dreams. Shockingly, I didn’t spend my childhood dreaming of running a 3D printing news site; the technology didn’t exist yet when I was born. Instead, I spent the ’80s and ’90s dreaming the dreams of many a young girl, and thought...
Energica Ego: Italian 3D Printed Electric Motorcycle to Debut at CES 2016

Energica Ego: Italian 3D Printed Electric Motorcycle to Debut at CES 2016

The new year has not even yet rung in, but excitement has certainly already been revving up for months regarding CES 2016–and with obvious reason. Promising the usual ‘star-studded show,’ this event centers around highlighting the truly revolutionary technology of today and tomorrow. Attracting innovators and enthusiasts from all over the world, this year the event will be […]

The new year has not even yet rung in, but excitement has certainly already been revving up for months regarding CES 2016–and with obvious reason. Promising the usual ‘star-studded show,’ this event centers around highlighting the truly revolutionary technology...
Eastman Chemical and colorFabb Will Debut New Copolyester nGen Filament at CES 2016 with LulzBot

Eastman Chemical and colorFabb Will Debut New Copolyester nGen Filament at CES 2016 with LulzBot

Back in 2013 Eastman Chemical Company and 3D printer filament manufacturer colorFabb collaborated on the development a line of advanced and chemically safe desktop 3D printer filaments. The colorFabb_XT filament offers users a high rate of durability and strength along with a very desirable resistance to high temperatures. But unlike other materials that offer the […]

Back in 2013 Eastman Chemical Company and 3D printer filament manufacturer colorFabb collaborated on the development a line of advanced and chemically safe desktop 3D printer filaments. The colorFabb_XT filament offers users a high rate of durability and strength...
Eliminating Limitations: Fuel3D Announces Two New Accessories for SCANIFY Scanners

Eliminating Limitations: Fuel3D Announces Two New Accessories for SCANIFY Scanners

3D scanners can do some amazing things, but, like any technology, they have their limits. One frustrating problem that users run into is the difficulty in scanning shiny objects. The play of light on any reflective or translucent object makes capturing a clear image pretty challenging. But Fuel3D, the makers of the SCANIFY line of […]

3D scanners can do some amazing things, but, like any technology, they have their limits. One frustrating problem that users run into is the difficulty in scanning shiny objects. The play of light on any reflective or translucent object makes capturing a clear image...
Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our 3DPrint.com.

You have Successfully Subscribed!