A Few Questions For

Exclusive Interview: Designer Francis Bitonti Talks New Direction for Studio, Product Design, and the 3D Printing Industry

It may not be Silicon Valley, but residing in New York City certainly has its perks for a tech reporter, especially for one with a keen enjoyment for design and fashion. When…

3D Printing Will Rock Paris — A Few Questions For: John Hornick

In every industry are individuals who effectively need no introduction; among those names in 3D printing is John Hornick. An intellectual property lawyer and prolific speaker, as well as now…

Unique Opportunities in 3D Printing for Patient-Specific Healthcare — A Few Questions For: Whiteclouds

Some may say that those crying out that 3D printing is the key to the next industrial revolution have their heads in the clouds — but is that always such…

Metal 3D Printing and EBM Technology at São Paulo — A Few Questions For: Arcam

With Inside 3D Printing São Paulo taking place just last week, the excitement lingers over everything that was shown at South America’s largest 3D printing event. We were certainly looking forward…

From 17th Century Organs to Soon-to-Launch “Fast Mode”: Sculpteo CEO Answers A Few Questions For Us

Some of the biggest names in 3D printing are so big that it can be easy to take them for granted at this point; of course we can turn to…

Community-Based Personalized Healthcare: A Few Questions For Neurosurgeon Paul D’Urso

While it may be a bit hard to believe here in Cleveland where it’s still snowing (!), May is just around the corner. While May heralds spring on this side…

CF-Nylon and Ultem 9085: 3D Printing Material Launches from 3DXTECH Promise Strength, Set to Continue Launching

Materials are a critical component of the 3D printing industry; without them, well, we’d be nowhere! Some suppliers stand out as head and shoulders above the rest, with a strong…

Metal 3D Printing Discussion Will Highlight in São Paulo — A Few Questions For: EOS

With Inside 3D Printing São Paulo coming up very quickly, excitement is starting to build: this will be the largest 3D printing event in South America. The buzz is building,…

3D Print Me a (Space) Pizza! A Few Questions For: BeeHex

3D printed food: love it or hate it, it’s coming. While to date we’ve seen some impressive proofs of concept (who could forget the terribly fancy 3D printed, edible Versailles?)…

Metal Additive Manufacturing Set to Make a Splash — A Few Questions For: Spencer Wright

It’s less than a month away now! Inside 3D Printing is coming again to the Big Apple, with the conference set for New York City running April 10-12 and promising…

Startups on the Upswing — A Few Questions For: Metamason

Back in October, at Inside 3D Printing Santa Clara, I sat for the first time in the audience watching the famed Startup Competition shape up in person. I’d been reading…

Opportunities in Metal 3D Printing — A Few Questions For: IDTechEx

If there are two things we know about 3D printing, it’s that opportunities are rising rapidly in the metals sector and that trade shows are a great place to hear…

Behind Lady Gaga at the Grammys — A Few Questions For: 3D Systems

The glitz! The glamour! The Grammys! The Gaga! Following this past Monday’s incredible Grammy Awards, a few performances have stuck in everyone’s minds–and Lady Gaga‘s tribute to the late David…

A Few Questions For: 3D Hubs

Here at 3DPrint.com, we love to keep up with the latest buzz in the world of 3D technologies–and that, of course, includes the latest at some of the great trade…

A Few Questions For: UCT Additive Manufacturing Center

Here at 3DPrint.com, we love to keep up with the latest buzz in the world of 3D technologies–and that, of course, includes the latest at some of the great trade…

A Few Questions For: 3D Printing Studios

Here at 3DPrint.com, we love to keep up with the latest buzz in the world of 3D technologies–and that, of course, includes the latest at some of the great trade…