3D Printing Gives a Previously Unidentified Dinosaur Skeleton New Life

RAPID

Share this Article

If you work at Triebold Paleontology, Incorporated, you may already have the job that every little kid dreams of having. Triebold is a company dedicated to the preservation of vertebrate fossils and the creation of museum-quality exhibits and the preparation, restoration, molding, casting, and mounting of specimens. As such, they employ droves of specialists from model makers to paleontologists. In other words, they specialize in all things specimen – great, small, rare, and fundamental – and they have been doing so for nearly a quarter of a century.

Ava-Skull-WebTriebold, appropriately headquartered in the Rocky Mountain Dinosaur Resource Center (RMDRC), is adding another notch to their belt by announcing the unveiling of a heretofore unknown species of ceratopsian dinosaur. The ceratopsian dinosaurs were a group of herbivorous, beaked gargantuans, the most famous of which is the triceratops.

AvaceratopsLabDataCleanThese creatures had a frilled neck plate, like an Elizabethan collar but with decidedly rougher table manners. The largest of them could reach 30 feet in length and upwards of 12,000 pounds. They roamed over a broad area of the Earth during the Cretaceous period, but never fear, they became extinct about 66 million years ago.

This particular ceratopsian has no formal scientific name as of yet, but those who know her best call her ‘Ava.’ The nearly complete original fossil skeleton was scanned and any missing pieces were recreated on a 3D printer based on laser scan data data. The researchers were lucky in that nearly every missing piece had a representative counterpart from the other side still present leading to the creation of a highly accurate specimen.

“Reconstruction and mounting the specimen involved laser scanning and 3D printing the few missing portions of the specimen,” the Triebold team said in a release. “Practically every missing portion was represented by its match from the other side, enabling precise restoration through digital mirror-imaging of 3D models and 3D printing the mirrored models. The skull was finished and placed on exhibit earlier but this is the first time the fully restored Late Cretaceous ceratopsian will have been assembled as a complete dinosaur skeleton.”

Before they could begin 3D printing the missing pieces, the paleontological team was searching through the sand in Harding County, South Dakota in a formation uncompromisingly named Hell Creek. As pulled from the ground, the skeleton was nearly 80% complete and even bore traces of skin impressions.Avaceratops-Lab-Clean

Despite being a sizable creature, this new creature was actually relatively small in comparison to the other members of the ceratopsian family. The skull measures just over a meter in length, meaning you wouldn’t want one of these greeting you happily at the door after a long day of work.

This is just one of the many instances in which 3D printing has been used to help in both the collection of paleontological data and its dissemination either to specialists or to the general public. If a picture is worth a thousand words, than a 3D print is worth any number of pictures in the sense that it can be easily shared, manipulated, and bring back to life the stories of animals long extinct.

Let’s hear your thoughts on this story here.

AvaLayoutJacob

Share this Article


Recent News

AM Data Slice: 3D Printing Materials to Reach $3.9B in 2024

3D Printing Unpeeled: Biofuel Waste to Filament & Sustainable Photopolymers



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

NSF Awards Kentucky $1M for Advanced Manufacturing

The National Science Foundation has awarded a $1 million grant to the University of Louisville for the Advancing Manufacturing and Building Construction Technologies (NSF AMT) project. This initiative is part...

3D Printing News Briefs, May 11, 2024: 3D Printed Stent, Tower, Sculptures, & More

We’re starting off with medical research in today’s 3D Printing News Briefs, as researchers in Korea used CT images and 3D printing to fabricate an educational simulator for a mastoidectomy....

3D Printing Unpeeled: Wind Turbines, Probiotics and Lenses

TPI Composites, ORNL and Ingersoll Rand are working to make wind turbine tooling segments that can be 18.3 meters long. These elements also include resistive wires that help keep the...

Tethon 3D Releases Cost-effective Bioprinter

Tethon 3D, known for its ceramic-loaded DLP materials, custom resins, and DLP 3D printers, has recently released a bioprinter. Vat polymerization printers like DLP systems have been widely used by...