Students Develop New 3D Printed Aquahand – Potential to Help Stroke Victims Regain Hand Movement

RAPID

Share this Article

lehighThe 3D printing space is has recently become a platform for affordable, functional, customizable prosthetic hands and arms. Whether it is through organizations such as e-NABLE, or other groups such as Robohand, the technology has enabled people from all around the world to fabricate prosthetic hands for friends, loved ones, and even complete strangers.

This originally was the goal of three students from Lehigh University; Elena Ramirez, Colleen Perry, and Jeff Peisner. Ramirez, who recently graduated from the university, tells 3DPrint.com that she and her two fellow students got together during their junior year in order to write up a proposal to 3D print prosthetic hands for children.

“Our goal was to make an inexpensive alternative for users that rapidly outgrow these devices,” Ramirez tells 3DPrint.com. “Another important reason for using 3D printing was that we could print prosthetics in a variety of colors and shapes, making a device that’s fun to wear rather than masking a disability.”

aquahandfeatured

After receiving funding through Lehigh’s Mountaintop Experience Program and teaming with Good Shepherd Rehabilitation Hospital in Allentown, PA, the team soon came to the realization that the market for 3D printed prosthetic designs seemed to be rather saturated.

“Furthermore, we learned [that] not many children need prosthetics after consulting with therapists at Good Shepherd,” Ramirez tells us. “We switched direction because we thought we could make a bigger difference designing exoskeletons for rehabilitation.”

That switch culminated in the creation of quite the unique 3D printed device that Ramirez calls the Aquahand. Currently in its second year of development, the project has taken on three new students — Emily Macmillan, Dan Levy, and Sam He — and the researchers are currently working on creating separate exoskeletons for three different movements, as well as the code needed to simplify the sizing which generates measurements from a simple photo of a recipient’s hand. Ramirez designed the exoskeleton in SolidWorks, and this summer has been working diligently to streamline the design and improve upon the aesthetics.

aquahandfeatured2

The device is designed for patients who suffer from movement disorders, especially those caused by strokes. Many stroke victims suffer from a condition called spastic muscle tone, which causes them trouble opening their hand.

“The functionality of the Aquahand is based on the concept of neuroplasticity — the brain’s ability to rewire synapses and neural connections from repetitive movement,” Ramirez tells us. “A patient can relearn a movement if it’s performed ~400 times/hour. However, this requires assistance from a therapist or medical device. The springs are the driving force to open the hand. I can attach springs based on desired strength since muscle tone varies across patients. After the Aquahand opens the hand, the patient can close using his or her own muscle tone. This allows a patient to repeat the gross grasp movement. The hope is that a patient relearns the movement to the point where they can grasp without exoskeleton or a therapist’s assistance.”

aquahandfeatured3

While the design is intended mostly for patients with spastic muscle tone, Ramirez says that there are other potential uses as well, such as for individuals who have flaccid muscle tone, as the Aquahand provides for fine motor exercises. Ramirez and team tried to keep as much of the device 3D printable as possible, but they did require the use of several parts which could not printed. These include the springs, strings, straps, and pads.

The design files for the Aquahand have been made available for others to download and 3D print themselves on Thingiverse. It should be interesting to see if anyone downloads and possibly iterates upon this design in the future.

Another variation of a similar assistive exoskeleton device, called the Spiderhand, caught our attention earlier this week. From the same team working with the Mountaintop Experience Program, the Spiderhand comes from one of Ramirez’s collaborators, Dan Levy. Intended for use by a stroke victim with flaccid muscle tone, the Spiderhand too is available for download at Thingiverse.

What do you think about the potential these devices have to assist those needing muscle flexibility? Discuss in the Aquahand forum thread on 3DPB.com.

Share this Article


Recent News

AM Data Slice: 3D Printing Materials to Reach $3.9B in 2024

3D Printing Unpeeled: Biofuel Waste to Filament & Sustainable Photopolymers



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

NSF Awards Kentucky $1M for Advanced Manufacturing

The National Science Foundation has awarded a $1 million grant to the University of Louisville for the Advancing Manufacturing and Building Construction Technologies (NSF AMT) project. This initiative is part...

3D Printing News Briefs, May 11, 2024: 3D Printed Stent, Tower, Sculptures, & More

We’re starting off with medical research in today’s 3D Printing News Briefs, as researchers in Korea used CT images and 3D printing to fabricate an educational simulator for a mastoidectomy....

3D Printing Unpeeled: Wind Turbines, Probiotics and Lenses

TPI Composites, ORNL and Ingersoll Rand are working to make wind turbine tooling segments that can be 18.3 meters long. These elements also include resistive wires that help keep the...

Tethon 3D Releases Cost-effective Bioprinter

Tethon 3D, known for its ceramic-loaded DLP materials, custom resins, and DLP 3D printers, has recently released a bioprinter. Vat polymerization printers like DLP systems have been widely used by...