Russian Amputee Uses 3D Printed Lever to Set New World Record in Deep Sea Diving

RAPID

Share this Article

3D printing is often called upon to help create assistive devices and prosthetics, so that people with disabilities and amputated limbs can still participate in the activities they enjoy. Earlier this month, a Russian para-athlete diver named Dmitry Pavlenko, who lost both his arms and his legs in a grenade explosion while in the military, set a new world record for deep sea diving, and 3D printing helped him do it.

In 2013, Philippe Croizon dove to a record-setting depth of 33 meters. In a project he titled “Challenging the Depth,” Pavlenko has beaten him by seven meters, establishing the new record for the eHandicap World Records (eHWR) as 40 meters.

“I am very happy to announce that the eHandicap World Records Experts Committee has approved Mr. Pavlenko’s record. The decision was taken unanimously,” said Alian Amar, the head of the eHWR expert group. “On behalf of the entire eHandicap World Records team, I warmly congratulate him and all the people around him for preparing the challenge and helping him succeed.”

Divers rely on special vests to dive to depth – the vest has a two-way valve that discharges and feeds air to the diver, while air circulation in the vest allows the diver to immerse themselves in, and emerge from, the water. Typically, divers use their fingers to control this buoyancy system with a lever, which can obviously not be done for divers like Pavlenko with amputated limbs.

The goal of the year-long project was to show that disabilities don’t have to be obstacles to achieving your goals. Previously, Pavlenko used a homemade lever to control the valve, which had become problematic, and there aren’t any companies producing special levers for amputees.

So he called on Anisoprint, a startup that developed a new technology for 3D printing products out of high-strength composite materials, and students from the Moscow Polytechnic University, to help him develop a new lever specifically tailored to his physical capabilities.

A hackathon was held at the university, so student teams could come up with ideas to improve Pavlenko’s buoyancy lever. Students Stanislav Shvydkin and Evgeniy Novikov proposed the use of 3D printing, due to its low cost and fast speed, and, according to the university, “rejected assembled structures, because a monolithic manufacture is more reliable, while it is feasible to change individual parameters in the CAD settings of the model.”

Several concepts were discussed, and while the hackathon jury preferred other products, Novikov and Shvydkin’s team continued to improve upon the 3D printable lever, and it was eventually selected as the final product idea. After some trial and error, a few 3D device models were developed, which resulted in four 3D printed prototypes made with FFF technology and ABS plastic; one of these was 3D printed on the startup’s Composer 3D printer.

“During the testing of the lever, made of the ABS plastic, the emergency load resulted in the breakdown of the device,” said Pavel Petrov, the head of the university’s Materials Processing by Pressure and Additive Technologies department. “The spare lever withstood the load but proved inconvenient for Dmitriy during his independent immersing to a big depth and simulating the exercise on buoyancy. Since the shape of the first lever has fitted Dmitriy’s anatomy ideally, it was repaired in the ‘field’ conditions, and it was exactly with it that the world record has been set.”

While the prototype levers are stronger than usual, thanks to 3D printing, the university explained that the material unfortunately displays different behavior, “depending on the direction of the load impact.”

“We decided to use this property as an advantage and to change the direction of the grid structure of the lever,” explained Novikov. “Since we have an opportunity to receive a product with high durability, it is possible to neglect the durability of the structure itself by reducing the cross-sectional area. Small lever has a low hydrodynamic resistance, and that is made up for by the reliability of the material. The load of 30 H was simulated in the program complex ‘Inventor’, and the structure proved good. Owing to the chosen technology we saved on the material, leaving a large margin of the product’s durability.”

Pavlenko chose the final 3D printed lever from the four prototypes, and on May 7th, completed an independent dive to the depth of 40 meters in the Red Sea. The next day, he sent the report of his dive to the international eHWR organization, which reviews achievements in non-Olympic sports by disabled athletes.

Now that he’s broken a world record, Pavlenko is planning to set a new one in Russia this summer. His team will help him achieve this new goal by developing a brand new buoyancy lever.

To see Pavlenko’s record-breaking dive for yourself, check out the video below:

Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below.

[Images: Moscow Polytechnic University]

 

Share this Article


Recent News

AM Data Slice: 3D Printing Materials to Reach $3.9B in 2024

3D Printing Unpeeled: Biofuel Waste to Filament & Sustainable Photopolymers



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

NSF Awards Kentucky $1M for Advanced Manufacturing

The National Science Foundation has awarded a $1 million grant to the University of Louisville for the Advancing Manufacturing and Building Construction Technologies (NSF AMT) project. This initiative is part...

3D Printing News Briefs, May 11, 2024: 3D Printed Stent, Tower, Sculptures, & More

We’re starting off with medical research in today’s 3D Printing News Briefs, as researchers in Korea used CT images and 3D printing to fabricate an educational simulator for a mastoidectomy....

3D Printing Unpeeled: Wind Turbines, Probiotics and Lenses

TPI Composites, ORNL and Ingersoll Rand are working to make wind turbine tooling segments that can be 18.3 meters long. These elements also include resistive wires that help keep the...

Tethon 3D Releases Cost-effective Bioprinter

Tethon 3D, known for its ceramic-loaded DLP materials, custom resins, and DLP 3D printers, has recently released a bioprinter. Vat polymerization printers like DLP systems have been widely used by...