feedstock

3D Printing News Briefs, June 1, 2024: Sustainability, Cementitious Materials, & More

In today’s 3D Printing News Briefs, we’ll start with sustainability research on AM feedstock from AMGTA, and then on to an aluminum alloy with enhanced mechanical properties. University students built…

Elementum 3D Receives $2.875M to Lead Aluminum 3D Printing Research

Elementum 3D, a Colorado-based additive manufacturing (AM) company specializing in metals development, has been awarded $2.875 million by Manufacturing USA institute America Makes for the “Proliferation of AM Aluminum Alloy…

DoD Awards 6K Additive $23.4 Million to Upcycle Scrap into High-Grade 3D Printing Powders

The US Department of Defense (DoD) has awarded 6K Additive, the Pennsylvania-based manufacturer of metal powders for additive manufacturing (AM), $23.4 million to expand its capacity for upcycling metal scrap…

3D Printing Webinar & Event Roundup: May 7, 2023

We’ve got plenty of in-person and virtual events to tell you about in this week’s roundup, along with webinars on everything from 3D printed eyewear and automated resin removal to…

3D Printing News Briefs, March 10, 2022: Standards, Services, Software, & More

In today’s 3D Printing News Briefs, a proposed ASM standard will work to control how the cleanliness of metal powder feedstock. Meltio announced an official sales partner in Japan, Biohm…

3D Printing News Briefs, December 15, 2021: New 3D Printers, Business, & More

In today’s 3D Printing News Briefs, we’re starting with a little business first. Then we’ll tell you about two new 3D printers, and then move on to 3D printed homes,…

Featured

ASTM’s ICAM 2021: Biggest Challenge for Feedstock to Enable 3D Printing to Scale

Hosted by ASTM International’s Additive Manufacturing Center of Excellence (AMCOE), the 2021 International Conference on Additive Manufacturing (ICAM) was held in Anaheim, California last week. 3DPrint.com was a media sponsor…

Coal-Based 3D Printing Materials Funded by $7M in U.S. DoE Grants

Rather than abandon them altogether, U.S. Department of Energy’s (DOE) and its Office of Fossil Energy and Carbon Management (FECM) continue to support fossil fuels. In this case, however, they’re…

3D Printing Webinar and Event Roundup: July 10th, 2021

We’ve got another busy week of industry webinars and events, both virtual and in-person, to tell you about! Topics range from automotive 3D printing and 3D printing steel to point-of-care…

3D Printing News Briefs, March 6, 2021: CGTrader, Lore, BAM

First up in today’s 3D Printing News Briefs, 3D model provider CGTrader has raised over $9 million in a recent funding round. Olympian Colby Pearce has partnered with new company…

Featured

Uniformity Labs Raises $38M for Possible Breakthrough in Metal 3D Printing Powders

3D printing company Uniformity Labs has just announced that it has raised $38.35 million in a Series B fundraiser. IP Group and Orion Resource Partners participated, but it is unclear…

Université de Lorraine: Direct Waste Printing with PLA Pellets Versus FDM 3D Printing

French researchers from Université de Lorraine assess 3D printing techniques and recycling feedstocks, detailing their study in the recently published ‘Mechanical Properties of Direct Waste Printing of Polylactic Acid with…

3D Printing News Briefs: November 13, 2018

We should really call today’s 3D Printing News Briefs the formnext 2018 Briefs, as announcements from the show are numerous this week. EnvisionTEC, XYZprinting, BASF, and DSM all introduced new…