3d printed motorcycle

Lacama: A 3D Printed Electric Motorcycle by Italian Volt

Lacama: A 3D Printed Electric Motorcycle by Italian Volt

It’s obvious that many motorcycles are meant for speed over comfort—not to mention the adrenaline flow of riding on two wheels out in the open and the fresh air, as opposed to being in an automotive ‘cage.’ There are many different ways to make a bike these days, and 3D printing is becoming more and […]

It’s obvious that many motorcycles are meant for speed over comfort—not to mention the adrenaline flow of riding on two wheels out in the open and the fresh air, as opposed to being in an automotive ‘cage.’ There are many different ways to make a bike...
Two 3D Printing and RC Enthusiasts Release Exclusive Model Designs on Pinshape

Two 3D Printing and RC Enthusiasts Release Exclusive Model Designs on Pinshape

From design contests to helpful guides, there’s always something new and interesting to be found on 3D printable model marketplace Pinshape, which was acquired by Formlabs about a year ago.  There are all sorts of models on the site, including this cool quadcopter by engineer and designer Daniel Norée, of OpenRC Project fame. The project, which […]

From design contests to helpful guides, there’s always something new and interesting to be found on 3D printable model marketplace Pinshape, which was acquired by Formlabs about a year ago.  There are all sorts of models on the site, including this cool...
Builder Extreme 1500 3D Printer Inspires Lay3rs to 3D Print a Full-Sized Ducati Motorbike

Builder Extreme 1500 3D Printer Inspires Lay3rs to 3D Print a Full-Sized Ducati Motorbike

In November, Dutch company Builder 3D Printers introduced the Builder Extreme 1500, one of the biggest FDM 3D printers in the world with a print volume of 1100 x 500 x 820 mm. The 1500 was the followup to 2015’s Builder Extreme 1000 and 2000, and continued the company’s pattern of releasing bigger and bigger […]

In November, Dutch company Builder 3D Printers introduced the Builder Extreme 1500, one of the biggest FDM 3D printers in the world with a print volume of 1100 x 500 x 820 mm. The 1500 was the followup to 2015’s Builder Extreme 1000 and 2000, and continued the...
Divergent 3D Closes Series A Funding with $23 Million to Further 3D Printing Car Manufacturing Platform

Divergent 3D Closes Series A Funding with $23 Million to Further 3D Printing Car Manufacturing Platform

After a Series A funding round led by technology venture capital fund Horizons Ventures, Divergent 3D is in the enviable position of having just received $23 million in investment funds. They state that they will be using this infusion of cash to commercialize their hardware/software platform, taking automotive manufacturing to the next level. Divergent 3D […]

After a Series A funding round led by technology venture capital fund Horizons Ventures, Divergent 3D is in the enviable position of having just received $23 million in investment funds. They state that they will be using this infusion of cash to commercialize their...
3D Printed Ducati and Suzuki RC Motorcycles, with Realistic 3D Printed Rider, are Ready to Race!

3D Printed Ducati and Suzuki RC Motorcycles, with Realistic 3D Printed Rider, are Ready to Race!

One of my very dear friends is a complete motorcycle enthusiast; I think he has two in his garage at the moment. He lives in a state that doesn’t have the kind of cold, snowy winter that I am currently suffering through in Ohio, so he probably gets to hit the open road a lot. We […]

One of my very dear friends is a complete motorcycle enthusiast; I think he has two in his garage at the moment. He lives in a state that doesn’t have the kind of cold, snowy winter that I am currently suffering through in Ohio, so he probably gets to hit the...
Blade and Dagger: Divergent 3D Makes Saving the Planet Look Sexy with 3D Printed Vehicles at CES 2017

Blade and Dagger: Divergent 3D Makes Saving the Planet Look Sexy with 3D Printed Vehicles at CES 2017

We saw a lot of amazing things last week at CES 2017, and although it was impossible to get a close look at everything in the expansive show, we were thrilled to see, in person, so much of the work of the many 3D printing companies that we write about on a regular basis. One […]

We saw a lot of amazing things last week at CES 2017, and although it was impossible to get a close look at everything in the expansive show, we were thrilled to see, in person, so much of the work of the many 3D printing companies that we write about on a regular...
Divergent 3D Unveils 3D Printed Motorcycle: The Dagger

Divergent 3D Unveils 3D Printed Motorcycle: The Dagger

If you are a car or motorcycle buff, it’s time to look more seriously in to the technology of 3D printing. What I’ve noticed time and time again regarding car and bike enthusiasts is that while they might be somewhat aware of 3D printing and all the miracles being produced therein, many of them aren’t […]

If you are a car or motorcycle buff, it’s time to look more seriously in to the technology of 3D printing. What I’ve noticed time and time again regarding car and bike enthusiasts is that while they might be somewhat aware of 3D printing and all the miracles being...
Dr. Eva Håkansson Relies on TAZ 3D Printer to Build Parts for Record Breaking Electric Motorcycle

Dr. Eva Håkansson Relies on TAZ 3D Printer to Build Parts for Record Breaking Electric Motorcycle

“I’m amazed that so many people are so amazed that a girl built a motorcycle.” – Dr. Eva Håkansson There are many types of different adrenaline junkies in the world, as well as those who have a definite need for exhilaration combined with some element of risk. Most of us immediately think of race car […]

“I’m amazed that so many people are so amazed that a girl built a motorcycle.” – Dr. Eva Håkansson There are many types of different adrenaline junkies in the world, as well as those who have a definite need for exhilaration combined with some element of risk....
IMTS 2016: 3D Printing in Photos

IMTS 2016: 3D Printing in Photos

While the conference is in fact still going on, I spent only Monday and Tuesday at Chicago’s McCormick Place, attending this year’s International Manufacturing Technology Show (IMTS). The show was, in a word, massive. From the physical — 1.3 million square feet of exhibition floor space over four buildings; more than 2,000 exhibitors; 113,747 registrations (and counting); […]

While the conference is in fact still going on, I spent only Monday and Tuesday at Chicago’s McCormick Place, attending this year’s International Manufacturing Technology Show (IMTS). The show was, in a word, massive. From the physical — 1.3 million...
Altair and Airbus APWorks Partner to Offer Industrial 3D Printing Consultation Services

Altair and Airbus APWorks Partner to Offer Industrial 3D Printing Consultation Services

Industrial design, engineering and software development company Altair is announcing that they have formed an ongoing partnership with Airbus‘ 3D printing subsidiary, APWorks. The non-exclusive partnership will allow both companies to offer their joint expertise in the areas of additive manufacturing and design simulation and optimization software to companies looking to integrate 3D printing technology into […]

Industrial design, engineering and software development company Altair is announcing that they have formed an ongoing partnership with Airbus‘ 3D printing subsidiary, APWorks. The non-exclusive partnership will allow both companies to offer their joint expertise...
3D Printed Electric Motorcycle from APWorks Looks Fragile, but It's Deceptively Strong

3D Printed Electric Motorcycle from APWorks Looks Fragile, but It's Deceptively Strong

It seems as though spring just started (or didn’t, if you live in Ohio where it SNOWS IN THE MIDDLE OF MAY), but we’re already only a month away from the official start of summer. Hard to believe, isn’t it? Today, mercifully, is a lovely one, and I have my window open and am listening to […]

It seems as though spring just started (or didn’t, if you live in Ohio where it SNOWS IN THE MIDDLE OF MAY), but we’re already only a month away from the official start of summer. Hard to believe, isn’t it? Today, mercifully, is a lovely one, and I...
Energica Ego: Italian 3D Printed Electric Motorcycle to Debut at CES 2016

Energica Ego: Italian 3D Printed Electric Motorcycle to Debut at CES 2016

The new year has not even yet rung in, but excitement has certainly already been revving up for months regarding CES 2016–and with obvious reason. Promising the usual ‘star-studded show,’ this event centers around highlighting the truly revolutionary technology of today and tomorrow. Attracting innovators and enthusiasts from all over the world, this year the event will be […]

The new year has not even yet rung in, but excitement has certainly already been revving up for months regarding CES 2016–and with obvious reason. Promising the usual ‘star-studded show,’ this event centers around highlighting the truly revolutionary technology...
This Incredible Fully Functional 3D Printed Motorcycle will be Unveiled at RAPID 2015 This Week

This Incredible Fully Functional 3D Printed Motorcycle will be Unveiled at RAPID 2015 This Week

As the world begins to come to grips over the fact that someone has already 3D printed a fully functional car, and that surgeons from across the globe have been able to successfully implant 3D printed structures into the human body, everyday seems to bring us yet another new surprise from within the 3D printing space. One […]

As the world begins to come to grips over the fact that someone has already 3D printed a fully functional car, and that surgeons from across the globe have been able to successfully implant 3D printed structures into the human body, everyday seems to bring us yet...
Jenifer 1 & Arthur 1 -- 3D Printable Car and Motorcycle Concepts Could Influence Future Design

Jenifer 1 & Arthur 1 -- 3D Printable Car and Motorcycle Concepts Could Influence Future Design

The automobile industry is in the midst of what may be the biggest shakeup in its 130 year history. Between ride sharing services, the influx of electric vehicles like the Tesla Model S, and the incredible work being done by companies such as Local Motors to 3D print automobiles, the next couple decades may be […]

The automobile industry is in the midst of what may be the biggest shakeup in its 130 year history. Between ride sharing services, the influx of electric vehicles like the Tesla Model S, and the incredible work being done by companies such as Local Motors to 3D print...
Jonathan Brand 3D Printed A Ghostly, Translucent, Full-sized Motorcycle - And It's Amazing

Jonathan Brand 3D Printed A Ghostly, Translucent, Full-sized Motorcycle - And It's Amazing

Jonathan Brand is a designer and artist and he’s done something gearheads, motorcycle freaks and 3D printing mavens will love. Working from his studio on Orange Street in New Haven, CT, he’s printed out an entire, full-sized replica motorcycle. It’s based on a classic 70’s Honda CB 500, and it’s built from translucent plastics with […]

Jonathan Brand is a designer and artist and he’s done something gearheads, motorcycle freaks and 3D printing mavens will love. Working from his studio on Orange Street in New Haven, CT, he’s printed out an entire, full-sized replica motorcycle. It’s...
Incredible Scaled Model of Ducati 1199 Superbike 3D Printed on Ultimaker in 40 Pieces

Incredible Scaled Model of Ducati 1199 Superbike 3D Printed on Ultimaker in 40 Pieces

If you are a sports bike or superbike enthusiast, then you have likely heard of the Ducati 1199. The Italian made machine weighs just 362 pounds, and packs a whopping 171.8 horsepower into its 1,198 cc engine. It can accelerate from 0-60 mph in under 3 seconds flat, and certainly isn’t hard on the eye […]

If you are a sports bike or superbike enthusiast, then you have likely heard of the Ducati 1199. The Italian made machine weighs just 362 pounds, and packs a whopping 171.8 horsepower into its 1,198 cc engine. It can accelerate from 0-60 mph in under 3 seconds flat,...
Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our 3DPrint.com.

You have Successfully Subscribed!

Newsletter Signup Form

Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
  • This field is for validation purposes and should be left unchanged.