There are an enormous array of materials available to anyone who wishes to create 3D objects, but Ekaggrat Singh Kalsi wanted a material that is both digitally ready and more than a little ethereal, so he 3D prints with light.
By day, Kalsi is a Project Architect at Santec (Burt Hill) and a graduate of the School of Architecture at CEPT University in Ahmedabad, India. He’s also a 3D printing enthusiast.
The layer-by-layer process of 3D printing is ideal for tracing out 3D objects by applying filament, but Kalsi uses a set of colored LED lights and his camera to put a new twist, as it were, on the process.
We first encountered his work back in June of last year when his technique was in the early stages of development, and Kalsi has quite literally “ramped” up the process since then.
“I upgraded the project to do light painting in full color,” Kalsi says. “I attached a 5mm RGB LED to micro platform of my 3DR delta using a proper attachment. The RGB LED is attached to pins 4,5,6 on the Ramps board. Also this time I wanted the camera to start and stop automatically as it is painful holding the shutter release button for a full four minutes.”
He says he attached the shutter release button to one of the Ramps pins, used an Opto Isolator, captured a professional 3D scan of his daughter’s face and then set to work painting with light.
Once the camera was automated, Kalsi says then needed to produce Gcode for the multiple angles of the face model, and with a total of ten different angles to work with, he built a rotating .GIF file of the scan. A custom script in Grasshopper 3D he wrote is capable of taking any 3D model and converting it to the Gcode which controls the path the LED follows and turns the light source on and off.
His NIKON D3100 camera was set for a long exposure to take photographs, but according to Kalsi, a still image of the result wasn’t enough to satisfy his desire to see the final image. He also wanted to make image of the painting in real time via video.
“Getting this done is a entire project in itself,” Kalsi says. “I used a plugin for the free video editing app Kdenlive.”
Once you see the project (check out the video below), you’ll be amazed at the result, and implementing the RGB LED to add color into the process was a brilliant addition to the original technique. Well played, Mr. Kalsi, well played…
Can you see applications for 3D printers other than their intended purpose such as this one from Ekaggrat Singh Kalsi? Let us know in the 3D Printing With Light forum thread on 3DPB.com.
Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
3D Printing Webinar and Event Roundup: May 5, 2024
We’ve got a busy week of 3D printing events ahead of us, in Texas, Florida, Washington, D.C., Shanghai, and more. Webinar offerings will cover medical models, PolyJet 3D printing, additive...
High Stakes, High Speed: KVG Acquires 15 Nexa3D HSE 3D Printers to Boost Military Tech
As 3D printing increasingly intersects with defense and military logistics, a new partnership between Nexa3D and mission support logistics firm KVG stresses the growing importance of this technology in strategic...
Construction 3D Printing CEO Reflects on Being Female in Construction
Natalie Wadley, CEO of ChangeMaker3D, could hear the words of her daughter sitting next to her resounding in her head. “Mum, MUM, you’ve won!” Wadley had just won the prestigious...
3D Printing News Briefs, February 17, 2024: Shot Blasting, Service Bureaus, & More
In today’s 3D Printing News Briefs, we’re starting out with post-processing, as SKZ Würzburg is using a shot blast system from AM Solutions for its research. Moving on to business,...