Outrage Over Attack on Costa Rican Toucan Will Lead to a 3D Printed Beak for ‘Grecia’

RAPID

Share this Article

A toucan from the forest of Grecia, Costa Rica was brought before veterinarians and, though the bird was found to be in good health otherwise, it was missing half its beak.

It was later revealed to workers at the animal rescue center in Alajuela that local officials witnessed youths laughing and beating the animal, and that during the attack the upper portion of its beak was broken off.

Veterinarian Carmen Soto works on Grecia's beak in Costa Rica.

Veterinarian Carmen Soto works on Grecia’s beak in Costa Rica. Photo: AFP

That is very bad news for the bird indeed as, without a beak, toucans are very much helpless when faced with predators, and since the female toucan chooses her mates based on the color of their beak.

Toucans have a colorful and large bill, which can in some species measure more than half the length of their bodies. Though large and stout looking, a toucan’s bill is very light and composed entirely of ‘bone struts’ filled with spongy, keratin tissue. Their beaks are a highly efficient thermo-regulation tool for the birds and they also use them to reach deep into trees to access food.

Toucans are primarily fruit-eaters, but they’re opportunistic as well and will prey on insects and small lizards.

COSTA-RICA-ANIMAL-ABUSE-SOCIAL-NETWORKSThe male toucan, named Grecia, lost a large portion of the upper part of his beak following the attack. The case generated widespread outrage and sympathy once Costa Ricans saw photos of the injured bird in newspapers and on social media sites, and a campaign to create a 3D printed prosthetic beak for Grecia quickly raised thousands.

The veterinarian who took over Grecia’s case, Carmen Soto, says that while the toucan is recovering and eating on his own, his wounds still need time to heal before the group can scan his beak to build a model.

Nelson Martinez, one of those taking on the project of creating a prosthesis for Grecia, says he and his team have been studying toucan beaks to come up a workable design and that the finished product would require “a fixed part and a moveable part so it can be cleaned or replaced as the toucan is still growing.”

“We couldn’t use any type of adhesive with chemical components as it could compromise the structure of the beak,” says Martinez.

Grecia’s story went viral throughout South America following the attack, and a social media campaign led by Luciano Lacayo quickly raised more than $7,000 in donations aimed at helping the injured toucan.

“Our team is overwhelmed with all the support. Not only have we reached our goal together, but we have done so in not even 48 hours,” Lucayo says, “We are in close contact with the parties in Costa Rica and the US to make the prosthesis a reality now. All further funds raised will go directly to the ZooAve Rescue Center to support them in the preservation of the beautiful wild birds and toucans there.”

Have you heard of any other cases where 3D printing has been used to help animals that were injured? Let us know in the Toucan 3D Printed Beak forum thread on 3DPB.com.

Share this Article


Recent News

3D Printing Webinar and Event Roundup: May 12, 2024

3D Printing News Briefs, May 11, 2024: 3D Printed Stent, Tower, Sculptures, & More



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

3D Printing Unpeeled: Wind Turbines, Probiotics and Lenses

TPI Composites, ORNL and Ingersoll Rand are working to make wind turbine tooling segments that can be 18.3 meters long. These elements also include resistive wires that help keep the...

3D Printing Unpeeled: Digital FDM Filament for Functional Gradients

Just published in Nature, a paper by a Seoul National University team looks at “3D printing with a 3D printed digital material filament for programming functional gradients.” Sang-Joon Ahn, Howon...

3D Printing Unpeeled: $5000 Cold Spray 3D Printer, Roland DGA & Living Materials

The AeroForge is a $5000 cold spray metal printer for copper made by a student team at Rice University. In a paper for ACS Central Science a team from Nanjing...

3D Printing Webinar and Event Roundup: April 28, 2024

In this week’s 3D Printing Webinar and Event Roundup, the Ceramics Expo is taking place in Michigan, Stratasys continues its advanced training courses, and SPE is holding a Polymer Characterization...