The Love and Pace team designed a pacemaker that would place a network of chips, each the size of a grain of rice, in multiple places inside the heart. These chips would communicate with a base station located under the patient’s skin and would charge via radio frequency. Whenever the base station sensed a problem with the heart’s rhythm, it would trigger the embedded chips to release a jolt of energy that would re-establish the heart’s normal rhythm.
Last year, former Rice University faculty member Aydin Babakhani and colleagues at the Texas Medical Center introduced a concept for a more advanced wireless pacemaker that could be embedded in the heart and charged via radio frequency energy harvesting. The students are attempting to build on that technology by establishing an entire network inside the heart.
“The current (commercial) leadless solution is a bullet-sized pacemaker with a battery that is installed inside the heart,” said team member Yoseph Maguire. “It is effective only in pacing a single chamber of the heart.”
Maguire and his fellow team members, computer and electrical engineering students Chris Chivetta, Yixin Chen, Cody Tapscott, Ricky Chen and June Chen, came up with a concept that uses millimeter-scale chips embedded permanently in the heart. They demonstrated the system using a 3D printed heart with light traces triggered by programmed anomalies and sensor-simulator chips that detected the problems and sent data to the base station. The base station then commanded the stimulators to released timed jolts to adjust the heart’s rhythm.
As no wires are involved, the control unit continuously sends power to and gathers data from the embedded chips through radio frequency identification. The chips would deliver 25 nanojoule charges to stimulate heart muscles.
“It’s a master-slave network,” Maguire said. “Once you have these chips positioned within the heart and covered over by scar tissue, they would communicate with the aggregator — a bigger board that has an RFID reader, takes in all the data, processes it and relays it back to the chips. If things aren’t working out well in the heart, the aggregator would say, ‘Hey, guys, I need you to pace.’ They would continuously pace until the aggregator observed that things are good in all the chambers.”
The project is far from being finished, and will likely be carried on by subsequent teams of students after these students graduate. When Rice University mentors find that a project is too complex to be completed in one year but is important enough to continue researching, they will pass it on to another set of students.
“The heart is a very unique and harsh environment for circuitry,” Maguire said. “Having it all integrated is a huge research task, so for us, just developing a proof-of-concept is enough.”
The team developed its ideas with help from faculty advisors Joseph Cavallaro, a professor of electrical and computer engineering, and Gary Woods, a professor in the practice of computer technology and electrical and computer engineering, along with Texas Heart Institute cardiologists Dr. Mehdi Razavi and Dr. Brian Greet. Contributing to the machine learning and sensing aspects of the project were Behnaam Aazhang, a professor of electrical and computer engineering, and Yingyan Lin, a Texas Instruments visiting research assistant professor of electrical and computer engineering.
Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below.
[Source/Images: Rice University]
Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
AM Data Slice: 3D Printing Materials to Reach $3.9B in 2024
“AM Data Slice” from Additive Manufacturing Research (“AMR”) is a regular segment that offers readers an insightful dive into the additive manufacturing (AM) landscape, showcasing pivotal statistics and trends derived from...
3D Scanning in Rwanda to Enable Custom 3D Printed Prosthetics for Children
Artec 3D, one of the world’s leading original equipment manufacturers (OEMs) of 3D scanning hardware, has partnered with nongovernmental organization (NGO) Humanity & Inclusion (HI) on a project centered around...
3D Printing Webinar and Event Roundup: April 14, 2024
We’re starting off the week’s 3D printing webinars and events at ASTM AMCOE’s 11th Snapshot Workshop and MACH Exhibition. Stratasys continues its advanced training courses, SME is holding a virtual...
Onward for Velo3D with Optimistic Q1 Outlook, Gaining Momentum in Defense Sector
Just days after Velo3D (NYSE: VLD) revealed a brutal earnings report, the company is showing some signs of recovery, announcing bookings totaling $27 million since mid-December. What’s more, Velo3D shared...