Sarah Goehrke

Digital Metal Discusses Huge Interest, Serial Manufacturing in Fine-Detailed Metal 3D Printing

Sweden-based Digital Metal is proud to be small; after all, as the company tagline proclaims, “Small is the new big in additive manufacturing.” And as the old adage goes, “Good…

Sculpted in Virtual Reality and Brought to Life in 3D Print, Monster Heralds the Future of VFX

Practical effects, including props, figures, masks, makeup, and more, are a much-loved mainstay in a special effects (FX) industry increasingly going digital. No amount of CGI can replace the visceral…

The Future of Metal Powders Obviously Includes 3D Printing, Says GKN

3D printing is the future — but that’s only part of the story. No single technology will dominate the future of manufacturing, but advanced technologies are certainly disrupting the status…

From Art to Science: 3D Systems Execs Continue Discussion on Taking 3D Printing from Prototype to Production

When 3D printing first emerged, it was squarely targeted at rapid prototyping; 3D Systems understands this origin perhaps better than most, as the original patent for stereolithography (SLA) 3D printing…

Essentium Looks to Bridge Gaps in Additive Manufacturing with Real Solutions

The team at Essentium is always up for a challenge. Whether that’s the challenge of toughening up materials, changing the physics of 3D printing, or backing up their bold claims,…

SPEE3D is Here to Compete with Casting, 3D Printing Metal at Thrice the Speed of Sound

Metal 3D printing systems tend to dominate headlines, especially as more players come into the game (and still more announce their intention to enter). The technology, as industry experts frequently…

It’s Always About Potential: EOS and the Additive Mile

Introducing its newest industrial 3D printing system, industry leader EOS was well set up for a very busy showing at RAPID + TCT. While last year at the event, EOS…

Luge, LAIKA, Aluminum: A Conversation in 3D Printing with Stratasys

In the runup to RAPID + TCT 2018, we knew we had a lot to expect from 3D printing industry leaders including Stratasys. The Eden Prairie, MN-based company sponsored the…

What’s New in 3D Printing? Todd Grimm’s Look at a Busy Six Months

3D printing, as anyone watching the industry understands, is a busy business. Few know this quite so thoroughly as industry expert Todd Grimm, President of T. A. Grimm & Associates,…

XJet is Ready for Business as NanoParticle Jetting 3D Printing Leaves the Lab

Israel-based XJet has been making headlines for its innovative NanoParticle Jetting 3D printing for years now, as the inkjet technology is applicable for both metal and ceramic manufacture. We’ve been…

Arcam Takes EBM to the Next Level: Execs Detail the Future of Metal Additive Manufacturing

One of the biggest announcements to emerge from this year’s RAPID + TCT event was the newest Electron Beam Melting (EBM) metal 3D printing system from Arcam EBM. The Arcam…

Jabil Additive Manufacturing Network, Global Expansion of Industrial 3D Printing Capacity Highlights for HP, Jabil Vision of a Digital Manufacturing Future

Jabil has established a name for itself in the additive manufacturing industry over the last several years as the technology has become an important strategic focus for the product solutions…

Applications, Metal, Maturation in 3D Printing Shine at RAPID + TCT

Anticipation is always high for a major event, and RAPID + TCT draws great focus to 3D printing in North America. Several major themes were intentional as this year’s event curated…

Carbon and the “New Future Additive Will Bring”: Exclusive Interview

While it’s the applications that draw wide attention to Carbon, and the advanced hardware, software, and materials that keep focus on the California-based company, ultimately any success comes down to…

Shapeways to Accelerate Expansion in 3D Printing with $30M Series E Funding

As Shapeways continues on its quest to expand in business operations and strategic offerings, the 3D printing platform announces a major step forward today with its $30 million Series E…

Siemens Advancing Additive Manufacturing: Exclusive Interview, Part Two – Providing Services

Germany-based Siemens has been working with 3D printing in its global operations for some time now, integrating the technology across a variety of its businesses and developing significant familiarity with…

3D Printing for Prosthetics and Social Impact: Going In-Depth with Stratasys and the VA

With great power comes great responsibility; Peter Parker has internalized this concept in his crime-fighting ethos — and in the 3D printing industry, Stratasys is embracing this value of market leadership…

HP Inc. Details Ascent in 3D Printing, Focus on Sustainability and Behind-the-Scenes Disruption

When HP Inc. decided to enter the 3D printing industry, it did so with one major focus: production. By internally developing Multi Jet Fusion technology for widespread use, HP sought…

3D Printing Business: Inside Sculpteo USA

Founded in 2009, Paris-based Sculpteo has grown substantially, expanding westward with the late 2015 opening of its US location. The San Leandro, California base for Sculpteo USA offers manufacturing and…

3D Printing Business: Inside Carbon

One of the most undeniably forward-thinking companies in the 3D printing industry today is Carbon. Heralded as a smart company, Carbon is at the forefront of major initiatives in high-speed,…

Shining 3D Celebrates Grand Opening of Office for the Americas, Shares Strategy in 3D Printing & 3D Scanning

In 2016, Hangzhou-based Shining 3D celebrated its new headquarters facility. In 2017, the company opened its EMEA office in Stuttgart, Germany, officially expanding operations to a second continent as its…

Siemens Advancing Additive Manufacturing: Exclusive Interview, Part One – Leveraging Expertise

As additive manufacturing continues to make its way into real-world applications throughout a variety of industry sectors, major multinational corporations are increasingly adopting and developing expertise in the technology. Industrial…

Evolve Additive Solutions Emerges from Stealth with 50x Faster 3D Printing for Production

3D printing is often called a disruptive technology, and many players in the industry are focused on bringing additive manufacturing into actual manufacturing, leveraging the benefits of this young, agile…

3D Printing Gets Cheeky for April Fool’s 2018

Ah, spring. The holiday season is behind us, the world is in bloom, and we’re all thinking of the delights of the warmer months. Mother Nature isn’t the only one…