BOOMcast: 3D Printed Disco Leg Cast Includes Music and Mood Lighting

RAPID

Share this Article

Mike North with his BOOMcast

Mike North with his BOOMcast

It was a bit traumatic when Dr. Mike North broke his fibula.

North, a TV host for Outrageous Acts of Science with a taxing travel schedule, was less than pleased with the idea of facing treatment with a traditional leg cast. He wanted a solution that was both durable and easy to remove, so he got in touch with the designers and engineers at FATHOM.

The FATHOM designers use their expertise in 3D printing and additive manufacturing to help customers innovate, and they specialize in professional 3D printers and manufacturing systems, prototyping, and advanced manufacturing services. The studio also offers design and engineering resources and they use PolyJet-based 3D printers, FDM-based 3D printing production systems, SLS machines, laser cutters and a complete model shop to take on a variety of design challenges.

The device they came up with for North is, admittedly, a bit over the top as it includes an array of technologies from a gyroscope to lighting and speakers, but the BOOMcast is an amazing demonstration of 3D printing nonetheless.BoomCast-ppt-callouts-201506-layers2

The cast can send real-time medical information to a doctor, play music from a smartphone, and collect data–all while looking very high-tech indeed.

The 3D printed body of the cast and the ratcheting straps which hold it in place on the leg were printed in Nylon 12, while the sole piece of the cast was built with PolyJet multi-materials. The entire case was custom fit using data from a digital scan.

mike-north-boom-cast-3The cast is powered by an Intel Edison chip and is WiFi-enabled. It includes a gyroscope, accelerometer, and magnetometer, along with a set of force-sensitive resistors. It boast the capability of sending real-time data via the cloud and can output mood lighting from multi-color LED feedback bulbs.

The four, force-sensitive resistors are used to measure the contact pressure at various points on the patient’s leg, and that data can let a doctor know if the patient is following orders for recommended load-bearing conditions.

But perhaps the wildest feature of the BOOMcast is the speaker system. The system can be activated with a couple of stomps to provide hands-free interaction to change songs, and it also plays a low-frequency tone which researchers say can help heal a fractured bone.

Image 376North broke his leg while celebrating the life of his best friend, Dan Fredinburg. Fredinburg, an executive at Google, was killed in a tragic avalanche accident on Mount Everest earlier this year. It was his friend’s approach to life that led North to seek out Studio Fathom in search of a solution to his need to stay busy and honor the wishes of his friend.

FATHOM says it’s not likely the BOOMcast will be a full-fledged consumer product in the near term–but as a proof of concept, it proved an excellent demonstration of how open-source development and Internet of Things technologies can be used to build novel and more effective products and treatments.

What do you think of this high-tech, 3D printed cast? Let us know in the BOOMcast forum thread on 3DPB.com. Check out the video below from North’s YouTube channel describing the cast.

 

Share this Article


Recent News

New Funding Drives Craft Health’s 3D Printed Medicine and Supplements

Wisconsin’s Evology Adds Digital Sheet Forming to Service Roster



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

3D Printing Financials: Desktop Metal Targets Recovery Amid Net Losses and Revenue Downturn

Despite facing a decline in revenue and the persistent challenges of a tight economic climate, Desktop Metal (NYSE: DM) is making strides toward operational efficiency. The first quarter of 2024...

3YOURMIND & Nigerian Oilfield Services Firm RusselSmith Team Up on 3D Printed Part Inventory

3YOURMIND, the German and U.S. software services provider specializing in digital inventory platforms for additive manufacturing (AM), has partnered with Nigerian oilfield services firm RusselSmith to digitize spare part files...

Sponsored

Who is Endeavor 3D?

You may be familiar with our company, Endeavor 3D, or perhaps not. Located in Metro Atlanta, we are a contract additive manufacturer (AM) equipped with polymer 3D printing, stainless steel...

Titanium Powder Supplier IperionX Completes HAMR Furnace Installation at Virginia Campus

IperionX, the Charlotte-based manufacturer and supplier of US-sourced titanium products, has installed the Hydrogen Assisted Metallothermic Reduction (HAMR) furnace at its Titanium Manufacturing Campus in South Boston, Virginia. The company...