It seems like every other day, we are covering another prosthetic device created by an organization called e-NABLE. Up until now, we have only reported on prosthetic hands that have been made for individuals who are missing the majority of their hand. These prosthetics are based on variations of several different open source models, such as the Cyborg Beast, the Ody Hand, and the Talon Hand, among others.
For those of you who are unfamiliar with e-NABLE, they are an organization of volunteers, that through 3D printing and sharing of ideas, help bring prosthetics to those in need. A typical prosthetic hand can cost upwards of $50,000, while a 3D printed hand can be made for well under $100. With children, it really isn’t feasible to spend a ton of money on a prosthetic device, that they will only outgrow within a year or so. This is why e-NABLE has been such a tremendous initiative that undoubtedly deserves more national attention.
e-NABLE has been extremely successful in creating working 3D printed prosthetic hands for individuals, but recently the organizations founder Jon Schull was presented with a rather large challenge. A 6-year-old boy, named Derek, was in need of an affordable prosthetic. Derek, unfortunately was missing not only his hand, but just about his entire right forearm. This became a huge challenge, since e-NABLE had yet to successfully create an entire working 3D printed arm.
Jon Schull and his team were up to the challenge though. They hit the drawing board and came up with quite the unique design for a prosthetic arm. The arm design was created by RIT students Jascha Wilcox, Paul Richard and Derek himself, who invented the extra long feature. It is based on prior work by the entire e-NABLE community, Robohand, and others. It is mostly 3D printed, with one exception being a PVC pipe in place of Derek’s forearm.
Just this past Friday, May 30th, Jon Schull, along with Occupational Therapists David Dietz and Nathan Ramsey met with 6-year-old Derek, his mother and his grandparents, as well as a few other friends and relatives, to try out the new 3D Printed arm that they had created.
“There are improvements to be made in the arm, but Derek and his mom thought his was good enough to go,” reported Jon Schull. “He wore it home.”
The arm works using cables, in similar manner as the 3D printed prosthetic hands which have been made prior. On a typical Cyborg Beast, or other 3D printed hand, when the patient bends his/her wrist, cables that run through the fingers are pulled, causing the fingers to bend. Derek’s 3D printed arm works in a similar fashion. When he bends his albow, the cables are pulled, causing the fingers to bend. You can see more in the video below:
Discuss this 3D printed arm, in the e-NABLE 3D printed prosthetic arm thread on 3DPB.com
[Images from Jon Schull of e-NABLE]Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
3D Printing Webinar and Event Roundup: May 5, 2024
We’ve got a busy week of 3D printing events ahead of us, in Texas, Florida, Washington, D.C., Shanghai, and more. Webinar offerings will cover medical models, PolyJet 3D printing, additive...
High Stakes, High Speed: KVG Acquires 15 Nexa3D HSE 3D Printers to Boost Military Tech
As 3D printing increasingly intersects with defense and military logistics, a new partnership between Nexa3D and mission support logistics firm KVG stresses the growing importance of this technology in strategic...
Construction 3D Printing CEO Reflects on Being Female in Construction
Natalie Wadley, CEO of ChangeMaker3D, could hear the words of her daughter sitting next to her resounding in her head. “Mum, MUM, you’ve won!” Wadley had just won the prestigious...
3D Printing News Briefs, February 17, 2024: Shot Blasting, Service Bureaus, & More
In today’s 3D Printing News Briefs, we’re starting out with post-processing, as SKZ Würzburg is using a shot blast system from AM Solutions for its research. Moving on to business,...