Bone Regeneration: Successful Bioprinting with Poly-Lactic-Co-Glycolic Acid/β-Tricalcium Phosphate Scaffolds
In ‘Poly(Dopamine) Coating on 3D-Printed Poly-Lactic-Co-Glycolic Acid/β-Tricalcium Phosphate Scaffolds for Bone Tissue Engineering,’ researchers from the School of Stomatology at Jilin University in Changchun, China are seeking improved methods for treating bone defects caused by health issues like osteoporosis, malignant tumors, and physical trauma. While currently there are numerous limitations for medical treatment, bioprinting and bone tissue engineering show great potential.
For this study, the researchers 3D printed polydopamine-coated poly-(lactic-co-glycolic acid)/β-tricalcium phosphate composite scaffolds, followed by characterization and biocompatibility tests.
The sample scaffolds created by the research team exhibited a regular shape, and pore size of ~500 μm, with a honeycomb structure—a form not uncommon in bioprinting.
“The printed filaments are exhibited in a network structure, with a strong architectural integrity. The surface morphology of the fiber-aligned scaffolds, with or without PDA surface modification, can be characterized by SEM,” stated the researchers. “The results show that PDA0, PDA1, and PDA2 scaffolds have pores distributed over the internal walls, with a highly roughened structural coating layer and uneven micro-surface in comparison with non-coated scaffolds.”
PDA0, PDA1, and PDA2 were evaluated for surface wettability using water contact angle measurement, with PDA0 exhibiting the highest contact angle at 88.3°, 68.5°, and 55.1°, respectively (p < 0.05). Porosities were found to be 60.31%, 61.1%, and 59.67%, respectively. While porosity can be maintained during bone tissue engineering, density varies
For cell attachment tests, the research team used mouse pre-osteogenic cells, demonstrating cell seeding efficiencies of the PDA0, PDA1, and PDA2 scaffolds at 56%, 76%, and 82%, respectively. They also noted that the PDA2 group ranked highest in adhesion (p < 0.05). As the PDA coating increased, cell membranes spread more expansively.
Ultimately, the PDA-coated PLGA/β-TCP composite scaffolds were 3D printed successfully, according to the research team. Along with successful fabrication efforts, the researchers found that the sample scaffolds were ‘suitable’ as vehicles for bone tissue engineering. Using a one-way ANOVA analysis, the team evaluated the variations between the experimental groups. Results were ‘statistically significant’ at a p value <0.05.
“Furthermore, the in vitro cell biocompatibility test results show that the PDA coatings can improve cell adhesion and osteogenic differentiation. To further study the osteogenic effects of the PDA-coated scaffolds, we established a mouse skull defect model and implanted the scaffolds in the defects for a period,” concluded the authors.
“The bones with scaffolds were extracted to be analyzed for new bone formation, and the results show that the PDA-coated composite scaffolds perform a satisfactory repair effect. In conclusion, our results demonstrate that the simplified bio-inspired surface modification of PLGA/β-TCP scaffolds by PDA is a very promising method for effectively repairing bone defects.”
Because of the difficulties and challenges in bone tissue engineering, there is continued research into the subject, from studies regarding nanofiber tubular scaffolds to structures made with tricalcium phosphate, porous metallic biomaterials, and more.
What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.
[Source / Image: ‘Poly(Dopamine) Coating on 3D-Printed Poly-Lactic-Co-Glycolic Acid/β-Tricalcium Phosphate Scaffolds for Bone Tissue Engineering’]Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
3D Printing Unpeeled: Biofuel Waste to Filament & Sustainable Photopolymers
I can’t ever remember a day with so many potentially high impact news stories have come out. In one story, we all know that there are problems with the safety...
Finnair Hires AM Craft to 3D Print Plastic Parts for Aircraft Interiors
Riga-based AM Craft, a supplier specialized in 3D printing aviation components and certified under EASA Part 21G, announced a significant achievement today. The company will assist in upgrading Finnair’s A320...
3DPOD Episode 198: High Speed Sintering with Neil Hopkinson, VP of AM at Stratasys
Neil Hopkinson, a pioneering 3D printing researcher, played a pivotal role in developing a body of research that is widely utilized today. He also invented High Speed Sintering (HSS), also...
3D Printing Webinar and Event Roundup: May 12, 2024
Webinars and events are picking up in the AM industry this week! ASTM International continues its Professional Certificate Course and Stratasys continues its advanced in-person trainings, while 3D Systems is...