In the recently published ‘Age-aware constitutive materials model for a 3D printed polymeric foam,’ authors A. Maiti, W. Small, J.P. Lewicki, S.C. Chinn, T.S. Wilson, and A.P. Saab explore the possibilities of fabricating 3D printed microstructures that will out-perform and out-live traditional foam.
The authors report on their findings after creating a sample in the form of a thermal-age-aware constitutive model for a 3D printed close-packed foam structure under compression. Such materials are in demand for applications like automotive, aerospace, construction, and packaging. The new method for creating polymeric foams produces uniform layers in each structure, and properties are easily customized for industrial users. Greater longevity is an enormous benefit too as many industries store parts for long periods of time—allowing for breakdown of conventional foams, and eventually damage to products too.
“The enhanced stability of the AM foam was attributed to superior stress distribution within its more uniform architecture,” stated the researchers.
The sample created for this study was meant to be simple yet capable of defining the progress of both the compression set (CS) and load retention (LR). Using the materials model as a vehicle for demonstrating the foam as a continuum, they based it on the following:
“initially (t = 0) there is a single network that governs the mechanical response of the foam. Under long-term strain (compression in our case) a second network forms that is in equilibrium at the strained state. While the material is under strain, the first network progressively weakens (i.e., decreases in modulus), while the second network becomes stronger, with a resulting shift in the equilibrium thickness that results in CS. On the other hand, LR results from a joint effect of the altered equilibrium thickness and changes in mechanical modulus in both networks.”
Eight samples were aged for 14 months, with four different temperature settings, and measurements taken around once a month. To begin, printed samples were sized at 75 × 75 mm square, with a uniform thickness of 1.6 mm. The researchers cut circular discs, with a diameter of 28.7
3D printed models used had a total of five parameters, and the researchers explain that they expect to use their samples for ‘thermal aging’ of stochastic foams, although experimental aging data is still required.
“Through accurate fitting of experimentally measured stress-strain curves at different times and temperatures, the model yields the functions μ10(t, T) and μ11(t, T). Additionally, we also back out quantities like compression set (CS) and load retention (LR) out of the model (see Eqs 5 through 8), two fundamental metrics that are used to quantify the mechanical/structural aging of polymeric components in real systems. The method of Time-temperature-superposition (TTS) is then used to create long-term prediction curves of each of these four quantities, along with margin curves for uncertainty quantification,” concluded the researchers.
“For the printed foam, we observe roughly the same activation barrier (ΔE ~ 83–86 kJ/mol) for the evolution of all four properties (i.e., CS, LR, μ10, and μ11), which is consistent with a single dominant molecular/network level mechanism governing the aging of all such properties.”
3D printing has been highly useful for industrial applications, and specifically the area of packaging—whether for sensors, glass, or food, beverage, and retail packaging. What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.
[Source / Images: ‘Age-aware constitutive materials model for a 3D printed polymeric foam’]Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
3D Printing Unpeeled: Biofuel Waste to Filament & Sustainable Photopolymers
I can’t ever remember a day with so many potentially high impact news stories have come out. In one story, we all know that there are problems with the safety...
Finnair Hires AM Craft to 3D Print Plastic Parts for Aircraft Interiors
Riga-based AM Craft, a supplier specialized in 3D printing aviation components and certified under EASA Part 21G, announced a significant achievement today. The company will assist in upgrading Finnair’s A320...
3DPOD Episode 198: High Speed Sintering with Neil Hopkinson, VP of AM at Stratasys
Neil Hopkinson, a pioneering 3D printing researcher, played a pivotal role in developing a body of research that is widely utilized today. He also invented High Speed Sintering (HSS), also...
3D Printing Webinar and Event Roundup: May 12, 2024
Webinars and events are picking up in the AM industry this week! ASTM International continues its Professional Certificate Course and Stratasys continues its advanced in-person trainings, while 3D Systems is...