In the recently published, ‘Silica optical fiber drawn from 3D printed preforms’ the authors created single and multimode fibers that can be used to create designs and parts for a range of networks, likely related to telecommunications and Internet of Things (IoT) technology.
Silica optical fibers are ‘the holy grail of 3D printing optical fiber,’ according to the authors, due to a ubiquitous nature and levels of low loss; in fact, the researchers state that there is not another alternative able to compete. For this study, the researchers investigate the process of creating a silica preform through both 3D printing and thermal processing—no small feat, considering it requires temperatures over T = 1900 ℃. To avoid this issue, the researchers tried using a lower melting polymer—a hybrid polymer-glass mix—via DLP printing. Steps involved in this process include:
- Photocurable resin preparation
- 3D printing of preforms
- Core fabrication
- Thermal debinding
- Final fiber drawing
The researchers polymerized the mixed resin with the DLP printer and went on to fabricate arbitrary structures. They designed the preform with Inventor CAD, and then it was 3D printed, cured with UV light. After debinding, the researchers placed the preform into a quartz tube for support, with a lower drawing temperature to eliminate water, air, and residual polymers.
“As the temperature gradually increased, the polymer is ablated leaving behind the silica nanoparticles, which come closer together leading to preform shrinkage,” state the researchers. “Sintering at higher temperatures fuses them together.”
The quality of the fiber was examined with an optical microscope, demonstrating the cross-section of both 3D printed single and multi-mode.
Fibers, with both minimum and maximum eclipse diameters, showed more elevated uniform tension. With ‘increased loss’ the potential for interfacial scattering is suggested, with ‘significant contribution’ from water—meaning that the bubbles may be holding trapped water. The researchers theorize that this could be resolved with the use of:
- Higher purity, drier starting chemicals
- Sintering and debinding
- Removal of the outer silica tube
“In conclusion, whilst there remains considerable scope to improve the transmission properties of this fiber, the first single mode and multimode silica optical fibers have been drawn from a 3D printed preform. The relative ease in which this was achieved suggests additive manufacturing will disrupt optical fiber fabrication,” concluded the researchers.
“Unlike conventional labor-intensive, lathe-based methods, the design and fabrication are not limited by a centrally spun or finely stacked preform, enabling configurations such as improved multicore and complex optical fibers, such as optimized Fresnel fibers, to be made. More broadly, painstakingly difficult complex patterns, multicore and multi-size and shaped fibers can be made that are not otherwise possible. This work, building off the original polymer versions, marks a new and exciting time for fiber fabrication and application.
3D printing is a technology very centered around materials usage, from silicate bone scaffolds to printing with silicone and epoxies, composites, and more. What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.
Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
3D Printing Financials: Steakholder Foods Balances Losses and 3D Printed Tech Advances in 2023
A pioneer in the field of 3D printed meat and fish, Steakholder Foods (Nasdaq: STKH) disclosed its 2023 financial results, a year highlighted by technological progress but overshadowed by financial...
3D Printing Financials: Protolabs’ Q1 3D Printing Revenue is Flat, Company Advances in Technology Push
Protolabs (NYSE: PRLB) has kicked off 2024 with a mild boost in revenue, revealing how the Minnesota-based company manages to adapt and thrive even in uncertain market conditions. While the...
Supply Chain Management and the Role of 3D Printing Digital Inventories
As the additive manufacturing (AM) industry grows beyond its humble roots as a rapid prototyping technology, it has been adopted by some of the world’s leading companies to produce not...
3D Printing Financials: Materialise’s Profitability Amid Revenue Dip in Q1 2024
Materialise (Nasdaq: MTLS) has released its first-quarter earnings for 2024, highlighting a challenging quarter with some key advances despite a dip in revenue. While navigating a mixed performance across its...