Fire crews need to be as prepared as they possibly can for the fires to come, and that means being armed with the latest technology. Fire equipment has come a long way over the last few decades, resulting in better safety for fire crews as well as more effectiveness in fighting fires. There’s still plenty of room for improvement, though, and 3D printing can play a role in that improvement.
Fire crews often use floating pumps, which can be used to pump as much as 1000 dm3 of water per minute. These pumps must be optimized by correlating their operating characteristics, like pressure and efficiency, with engine operation, like power and engine speed. Sinterit, maker of the Lisa desktop SLS 3D printer, was recently responsible for the redesign of a floating pump to better optimize it. The rotor blades were redesigned in a process that, using conventional prototyping techniques, would involve eight successive stages, including 2D documentation, casting and processing.Instead, the designers used 3D printing, which reduced the necessary stages to only two. The 3D model was created, and it was then printed on the Lisa – that’s all. No machining or polishing was needed, and since holes could be designed right into the model, they didn’t need to be drilled or tapped. In addition, SLS 3D printing does not require supports, so that element of post-processing was unnecessary.
Overall, the production of the rotor blades was accelerated by 30 percent. Not only did the precision of the part and the lack of post-processing speed up the process, but if the part needed to be altered, it could easily be done in the software before printing out a new part. Thanks to the isotropic and mechanical properties of the SLS powder, the prototype part was fully suited to testing in real-life situations before creating the final version.
The massive wildfire in California may have been put out, but currently wildfires are burning in Arizona, Colorado and New Mexico, thanks to an unusually hot spring, a winter with little snowfall, and the carelessness of campers who are failing to extinguish their campfires. Large portions of national forests are being closed off to the public, and thousands are being forced to evacuate from their homes. This is just the start of what looks like it’s going to be an active and dangerous fire season across the American West. Firefighters can use all the help that they can get, and whether that’s a more efficiently prototyped part, sensors to offer earlier warnings, or other necessary parts, 3D printing can play a large role in fighting this ongoing battle.
Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below. [All images provided by Sinterit]
Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
US Army Contracts 3YOURMIND & Phillips Corp. for 3D Printed Tank Parts Identification
The US Army Combat Capabilities Development Command (DEVCOM) Ground Vehicle Systems Center (GVSC) has awarded 3YOURMIND and Phillips Corporation Federal Division a contract to develop part identification solutions for tanks....
Printing Money Episode 18: The DC Fly-In with Mark Burnham, AddMfgCoalition
It’s only been a week since the previous show, but Printing Money is back already with Episode 18. Certain events call for Printing Money’s coverage, and the recent 2nd Annual...
Aerospace OEM Invests $9.1M in Michigan for Metal 3D Printing and More
Barron Industries, a foundry based in Michigan specializing in serving the aerospace and defense sectors, has made a $9.1 million capital investment to expand its operations in Oxford, Michigan. The...
Wisconsin’s Evology Adds Digital Sheet Forming to Service Roster
Evology, a service bureau based in Wisconsin and specializing in serving strategic sectors like aerospace and defense, has added digital sheet forming (DSF) to its repertoire of manufacturing capabilities. Evology...