“Our goal over the last two and a half years was to dramatically increase the temperature that electrical machines are capable of withstanding,” said Dr. Ralf Werner, head of the Professorship.
The researchers achieved this goal by replacing conventional polymer-based insulation materials with specialized ceramics, which have a much higher degree of temperature resistance.
The ceramic insulation material also has a higher degree of thermal conductivity, so heat loss generated in the conductors can be more quickly dissipated. This allowed the researchers to increase the output density of electrical machines.“The maximum permissible winding temperature of 220°C associated with conventional insulation systems can then be exceeded by a significant amount,” said Rudolph. “The operating temperature of electric machines is therefore only limited by the ferromagnetic properties of the iron components, which can only be maintained up to 700°C.”
The 3D printing process that the researchers developed for the motor involves the extrusion of viscous pastes which consist of particles of iron, copper or ceramics as well as specially-adapted bonding agents. The 3D printed part is then sintered, which burns away the binder and fuses the metallic or ceramic materials together.“Despite the process-related decrease in the conductivity of the copper used, in specific application scenarios, it is possible to increase the degree of efficiency by significantly reducing the winding temperature,” said Lorenz.
“The special strength of the 3D multi-material process lies in the possibility of using several materials simultaneously during a printing process,” the researchers explained. “For example, electrically conductive structures made of copper can be printed together with their insulation. This is made of ceramic materials that are superior to conventional organic insulating materials made of plastic in many physical properties such as heat resistance or thermal conductivity. In this way, electric coils can be produced with significantly higher temperature resistance. In combination with ferromagnetic materials such as iron, moreover, it is possible to manufacture entire electrical machines or their components in one printing operation.”
To achieve the necessary degree of precision when extruding the pastes, the researchers worked closely with ViscoTec Pumpen- u. Dosiertechnik GmbH.
“The motor that was printed in the Chemnitz University Laboratory represents a breakthrough and is at the same time the proof of principle – it demonstrates the feasibility – of our technology,” said Rudolph.
Rudolph and Lorenz plan to start a university spin-off company based on the technology. The researchers presented their work at Hannover Messe, which took place from April 23rd to the 27th. You can learn more about their 3D printing process here.
Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below.
[Source: Chemnitz University of Technology]
Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
3D Printing Unpeeled: Biofuel Waste to Filament & Sustainable Photopolymers
I can’t ever remember a day with so many potentially high impact news stories have come out. In one story, we all know that there are problems with the safety...
Finnair Hires AM Craft to 3D Print Plastic Parts for Aircraft Interiors
Riga-based AM Craft, a supplier specialized in 3D printing aviation components and certified under EASA Part 21G, announced a significant achievement today. The company will assist in upgrading Finnair’s A320...
3DPOD Episode 198: High Speed Sintering with Neil Hopkinson, VP of AM at Stratasys
Neil Hopkinson, a pioneering 3D printing researcher, played a pivotal role in developing a body of research that is widely utilized today. He also invented High Speed Sintering (HSS), also...
3D Printing Webinar and Event Roundup: May 12, 2024
Webinars and events are picking up in the AM industry this week! ASTM International continues its Professional Certificate Course and Stratasys continues its advanced in-person trainings, while 3D Systems is...