Chad Coarsey was born with symbrachydactyly of the left hand, which left him without most of his hand but with a functional wrist. When he was approached by a classmate at Florida Atlantic University and asked if he would like to have a 3D printed prosthetic hand made for him he immediately said yes. Little did the bioengineering student know that the hand being made for him by electrical engineering student and lab manager Perry Weinthal would lead to something far more important than a cool bionic hand. After the pair tried out several versions of the hand, and experimented with different designs, they decided to team up and launch a non-profit called The Bionic Glove Project and 3D print prosthetic hands for anyone in need.
The first person that Weinthal and Coarsey were able to help was six-year-old Julian Sanchez who, like Coarsey, was born without his fingers. As a starter hand, Julian was given an early prototype that was developed for Coarsey but rejected for being too small. However it fit the six-year-old perfectly, and he quickly took to using his bionic glove as if he had used it his entire life. When Julian was invited to throw out the first pitch at a Miami Marlins game in September of 2015, Weinthal and Coarsey made him a brand new red, white and blue prosthetic hand.
As Julian gets older, he is going to quickly outgrow his prosthetic hands at a rate of about one every six months. Thankfully, each 3D printed hand only costs a few hundred dollars in materials and supplies, not the tens of thousands that traditional prosthetics cost. That means that it will be pretty easy and inexpensive to keep Julian in the properly-sized prosthetic hands – another benefit of using 3D printing to make prosthetic devices rather than the more expensive and labor intensive traditional methods.
It was while reading a news story about the hand that Weinthal and Coarsey made for Julian when 23-year-old Damba Koroma first learned exactly what 3D printing could do for someone missing a limb. When Koroma was only five years old she was caught up in the tragic civil war that was raging throughout Sierra Leone and had her arm brutally cut off just above the elbow by rebels who had raided her village. In the fifteen years since, she has been adopted by a couple in the US and was attending college in Virginia. It was while working as as a volunteer with Americorps that Koroma read a news story on Weinthal and Coarsey and wondered if they would be able to help her with a prosthetic hand. So she decided to take a chance by emailing them.Weinthal and Coarsey were happy to help make Koroma’s prosthetic hand, and a charity called the Quantum Foundation was willing to put up the $500 that they would need to 3D print and assemble the prosthetic. In no time at all Koroma had her new hand made from blue, green and even a few glow-in-the-dark parts. While trying her hand on for size, Koroma couldn’t help but let out an excited “Yay!” once it fit her properly. While using this type of prosthetic hand, based on a design from e-NABLE, takes a bit of getting used to, Koroma was eager to test it out in the kitchen where she enjoys cooking food from her native Sierra Leone.“I was like, I’d like to be a guinea pig if you guys are still working on the project. I was really amazed at what they did,” Koroma told the Sun Sentinel.
Koroma’s prosthetic was the fifth hand designed and built by Weinthal and Coarsey since they started their non-profit. Since their first hand, made with their own money, the pair have received a $3,000 grant from the Quantum Foundation for their own 3D printer. They are just getting their non-profit going and already have a long list of parents who want 3D printed prosthetic hands for their children, many of them referrals from a local doctor who originally put them in contact with their first hand recipient, Julian. Dr. Aaron Berger is a pediatric surgeon at Nicklaus Children’s Hospital who specializes in surgeries of the hand, and consults with the Bionic Glove Project. You can find out more about Weinthal and Coarsey, and the Bionic Glove Project, on their website. Discuss in the 3D Printed Prosthetic Hand forum over at 3DPB.com.
[Source: The Bionic Glove Project / Images: Sun Sentinel]Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
3D Printing Unpeeled: Biofuel Waste to Filament & Sustainable Photopolymers
I can’t ever remember a day with so many potentially high impact news stories have come out. In one story, we all know that there are problems with the safety...
Finnair Hires AM Craft to 3D Print Plastic Parts for Aircraft Interiors
Riga-based AM Craft, a supplier specialized in 3D printing aviation components and certified under EASA Part 21G, announced a significant achievement today. The company will assist in upgrading Finnair’s A320...
3DPOD Episode 198: High Speed Sintering with Neil Hopkinson, VP of AM at Stratasys
Neil Hopkinson, a pioneering 3D printing researcher, played a pivotal role in developing a body of research that is widely utilized today. He also invented High Speed Sintering (HSS), also...
3D Printing Webinar and Event Roundup: May 12, 2024
Webinars and events are picking up in the AM industry this week! ASTM International continues its Professional Certificate Course and Stratasys continues its advanced in-person trainings, while 3D Systems is...