It seems like every other day, we are covering another prosthetic device created by an organization called e-NABLE. Up until now, we have only reported on prosthetic hands that have been made for individuals who are missing the majority of their hand. These prosthetics are based on variations of several different open source models, such as the Cyborg Beast, the Ody Hand, and the Talon Hand, among others.
For those of you who are unfamiliar with e-NABLE, they are an organization of volunteers, that through 3D printing and sharing of ideas, help bring prosthetics to those in need. A typical prosthetic hand can cost upwards of $50,000, while a 3D printed hand can be made for well under $100. With children, it really isn’t feasible to spend a ton of money on a prosthetic device, that they will only outgrow within a year or so. This is why e-NABLE has been such a tremendous initiative that undoubtedly deserves more national attention.
e-NABLE has been extremely successful in creating working 3D printed prosthetic hands for individuals, but recently the organizations founder Jon Schull was presented with a rather large challenge. A 6-year-old boy, named Derek, was in need of an affordable prosthetic. Derek, unfortunately was missing not only his hand, but just about his entire right forearm. This became a huge challenge, since e-NABLE had yet to successfully create an entire working 3D printed arm.
Jon Schull and his team were up to the challenge though. They hit the drawing board and came up with quite the unique design for a prosthetic arm. The arm design was created by RIT students Jascha Wilcox, Paul Richard and Derek himself, who invented the extra long feature. It is based on prior work by the entire e-NABLE community, Robohand, and others. It is mostly 3D printed, with one exception being a PVC pipe in place of Derek’s forearm.
Just this past Friday, May 30th, Jon Schull, along with Occupational Therapists David Dietz and Nathan Ramsey met with 6-year-old Derek, his mother and his grandparents, as well as a few other friends and relatives, to try out the new 3D Printed arm that they had created.
“There are improvements to be made in the arm, but Derek and his mom thought his was good enough to go,” reported Jon Schull. “He wore it home.”
The arm works using cables, in similar manner as the 3D printed prosthetic hands which have been made prior. On a typical Cyborg Beast, or other 3D printed hand, when the patient bends his/her wrist, cables that run through the fingers are pulled, causing the fingers to bend. Derek’s 3D printed arm works in a similar fashion. When he bends his albow, the cables are pulled, causing the fingers to bend. You can see more in the video below:
Discuss this 3D printed arm, in the e-NABLE 3D printed prosthetic arm thread on 3DPB.com
[Images from Jon Schull of e-NABLE]Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
3D Printing Unpeeled: $5000 Cold Spray 3D Printer, Roland DGA & Living Materials
The AeroForge is a $5000 cold spray metal printer for copper made by a student team at Rice University. In a paper for ACS Central Science a team from Nanjing...
3D Printing Webinar and Event Roundup: April 28, 2024
In this week’s 3D Printing Webinar and Event Roundup, the Ceramics Expo is taking place in Michigan, Stratasys continues its advanced training courses, and SPE is holding a Polymer Characterization...
Meltio Expands Global Reach with New Partnerships in the Americas and Europe
Spanish 3D printing manufacturer Meltio has expanded its sales network across the globe. With the addition of three new partners in the United States, Brazil, Argentina, and Italy, Meltio aims...
US Army Corps of Engineers Taps Lincoln Electric & Eaton for Largest 3D Printed US Civil Works Part
The Soo Locks sit on the US-Canadian border, enabling maritime travel between Lake Superior and Lake Huron, from which ships can reach the rest of the Great Lakes. Crafts carrying...