3D Fashion: New Research Project Wants the Fashion of the Future to be 3D Printed

IMTS

Share this Article

3dp_3dfashion_loughborough_uni_logoIn the past few years we have seen 3D printing used to create some amazing things that most of us probably couldn’t have dreamed of happening in our lifetime. The technology has been used to 3D print cars, entire houses, food, custom medications, consumer products and soon they will even be 3D printing living tissue. What is truly amazing about 3D printing is the vast applications that it has been used to create, and each one of them required its own technology and research to perfect and get right. What is even more incredible is the sheer number of uses for 3D printing that are still being developed and perfected.

Most 3D printed textiles are made using SLS 3D printers.

Most 3D printed textiles are made using SLS 3D printers.

While we’ve seen plenty of 3D printed clothing, for the most part there have been little to no practical applications yet. That doesn’t mean that there hasn’t been a ton of amazing research into wearable 3D printed clothing and fabrics, but there are still some kinks to work out of the process. Primarily 3D printed fabrics and textiles are printed using a selective laser sintering process because it offers the highest level of detail needed to produce movable materials that can be turned into clothing. Unfortunately the detail still isn’t fine enough to make practical clothing, but the research has produced some innovative and smart geometries that could eventually be scaled down into lightweight and wearable 3D printed fabrics.

A new joint research project from the UK’s Loughborough University and global textile and garment manufacturer Yeh Group is looking to take 3D printed textiles from concept to wearable. Product and Industrial Design Senior Lecturer Dr. Guy Bingham is the head of the new project and is hoping their research can ultimately change the way that we design, manufacture and wear clothing. The 18-month project is called 3D Fashion and the goal is to produce finished, ready-to-wear clothing directly from raw materials in a single manufacturing operation. The ultimate goal is to create a 3D printing process that can be commercialized and used to manufacture customized clothing using polymer materials.

3D printed textiles can be printed in any color, which virtually eliminates the pollution and waste caused by traditional dyeing.

3D printed textiles can be printed in any color, which virtually eliminates the pollution and waste caused by traditional dyeing.

“[3D printing] allows us as designers to innovate faster and create personalised, ready-to-wear fashion in a digital world with no geometrical constraints and almost zero waste material. We envisage that with further development of the technology, we could 3D print a garment within 24 hours. Printing clothes using AM will revolutionise the fashion industry worldwide by opening up digital manufacturing to the masses via online retail, bringing a much needed update to 19th century techniques and processes. This modern approach to clothing production helps meet the growing demand for personalised apparel and footwear which through 3D printing can be produced in a sustainable and ethical way,” said Dr Bingham.

3D printed textile geometries up close.

3D printed textile geometries up close.

Traditional clothing manufacturing is incredibly wasteful and environmentally damaging. China still produces most of the world’s textiles, and in 2010 alone it processed more than 41 millions tons of fibers. Unfortunately, that year they also produced three billions tons of air pollution, millions of tons of wasted fabric material and each individual mill used an average of 200 tons of water for each ton of fabric that was dyed, producing more than two and a half billion tons of waste water. But 3D printing can virtually eliminate all of that pollution, while also encouraging more localized clothing manufacturing and production.

“3D Fashion supports the Yeh Group vision of direct polymer to garment manufacture. The Yeh Group is always striving to cut out unnecessary waste and resource use, and support the industry’s goals of faster to market, creating a manufacturing technology that brands and retailers can install closer to their customers. This is all with no compromise to performance,” explained Yeh Group Managing Director David Yeh.

Using 3D scanning to create custom-fit clothing.

Using 3D scanning to create custom-fit clothing.

Not only can 3D printed clothing dramatically reduce waste, pollution, labor costs and CO2 emissions, but it can also be used to produce completely personalized garments, without adding any additional costs to the process. Because it doesn’t cost any more to 3D print objects with varying geometries, new clothing manufacturers could use modern, 3D scanning technology to create customized clothing that is made specifically for the wearers body. You can read more about the 3D Fashion project here. Do you think 3D Printed Clothing will be popular in the future? Discuss in the 3D Printed Textiles & Clothes forum over at 3DPB.com.

[Source/Images: 3D Fashion / Source: The Engineer]

 

Here is a video about the 3D Fashion Project:

Share this Article


Recent News

Stanford Researchers 3D Print Elusive Shapeshifting Structures

Each to Their Own: Exploring Creality’s Latest Ender Trio as the Company Strengthens Its Commitment to 3D Printing Advocacy



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

3D Printing Unpeeled: 3D Printing Endangered Bird Eggs, Polymer Satellite Bus, QIDI

The New Zealand Department of Conservation (DOC) is using 3D printing to help protect the endangered fairy tern. The New Zealand variant is critically endangered with only about 40 of...

Nexa3D Welcomes 3D-Fuel Materials to Its Expanding Family

California-based Nexa3D is quickly expanding its product offerings, acquiring assets that both grow its overall additive manufacturing (AM) processes and materials. Complementing its November 2023 purchase of material extrusion firm...

Does 3D Printing Herald the Democratization of Manufacturing?

The idea of democratization, broadly defined as giving power and access to the general public, is often applied to fields experiencing major shifts. Enter 3D printing, a technology brimming with...

3DPOD Episode 188: Clare Difazio of E3D – Growing the Industry, and Growing With the Industry

Clare DiFazio’s journey into the 3D printing industry was serendipitous, yet her involvement at critical moments has significantly influenced the sector. Her position as Head of Marketing & Product Strategy...