Researchers from the Korea Institute of Science and Technology (KIST) recently demonstrated a conductive elastic ink that can print self-supporting structures in any direction. This new ink uses an emulsion system to achieve the desired print flow mechanics, and with its publication, could lead to numerous innovations in the stretchable and wearable electronic field.
3D printed electronics are growing, but the pace is difficult to understand, due to trade secrecy. One area that has received much attention has been 3D printed conductive elastomers. So far, printing conductive elastomers has been limited to a 2D plane because the rheological properties of most inks can’t support their weight immediately after printing. However, if a material could print free-standing structures while also being flexible enough to move with a person’s body, it could maximize the fidelity of the wearable devices and achieve the complex circuits needed to match the morphology of an individual patient.
Well, the Korean team did just that and found a way to manipulate an ink’s rheological properties to omnidirectionally print elastic conductors.
The KIST researchers used an emulsion system that consisted of a conductive elastomer composite (silver, Ag, multi-walled carbon nanotubes, MWCNTs, and polydimethylsiloxane, PDMS), an immiscible solvent (diethylene glycol, DEG), and emulsifying solvent (chloroform, CHCl3). Turns out, the DEG was the key ingredient to getting the proper rheological properties as it stopped the filler from settling in the dispersion and gave it pseudo-plastic and lubrication attributes which prevent nozzle clogging allowing for stable prints.
The emulsion ink reached a minimum feature size of less than 100 μm and a maximum feature size of a few millimeters. The inks also achieved an impressive stretchability of up to 150% and had improved electrical conductivity because of the surface localized microstructures formed when the dispersed solvent vaporized.
KIST’s new method will allow for a variety of 3D wiring patterns to be printed, and they showcased its ability in the final figure. The researchers created a skin-mountable temperature sensor using their new emulsion conductive ink as wiring, mini LEDs, and a microcontroller unit with a temperature sensor. The sensor’s matrix-type stretchable display easily reads the temperature of the air around it and can be seen changing from 25°C to 32°C when a researcher first touches the device, and from 33°C to 42°C when a warm glass was introduced.
Now, this won’t be the end of the road, and more improvements will be needed before it heads to commercialization, but it still opens the doors to new possibilities in wearable and stretchable electronics. The authors even say the ink’s formulation can be easily modified to exhibit the desired characteristic an individual situation might need. Time will tell how this technology is implemented, but if it can help electronic devices interface with the human body easier and more efficiently, then it sounds like the field is heading in the right direction.
The full academic article can be found here at Nature Electronics.
Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
Gorilla Sports GE’s First 3D Printed Titanium Cast
How do you help a gorilla with a broken arm? Sounds like the start of a bad joke a zookeeper might tell, but it’s an actual dilemma recently faced by...
Nylon 3D Printed Parts Made More Functional with Coatings & Colors
Parts 3D printed from polyamide (PA, Nylon) 12 using powder bed fusion (PBF) are a mainstay in the additive manufacturing (AM) industry. While post-finishing processes have improved the porosity of...
$25M to Back Sintavia’s Largest Expansion of Metal 3D Printing Capacity Since 2019
Sintavia, the digital manufacturing company specializing in mission-critical parts for strategic sectors, announced a $25 million investment to increase its production capacity, the largest expansion to its operations since 2019....
Velo3D Initiates Public Offering in a Bid to Strengthen Financial Foundations and Drive Future Growth
Velo3D (NYSE: VLD) has been among a number of publicly traded 3D printing firms that have attempted to weather the current macroeconomic climate. After posting a challenging financial report for 2023,...